Rural Engineering Department Tender

M -150 Brick work in 1:4 (one cement and four course sand) mortar in Foundation and plinth including supply of all materials, labour, Tools & plants etc, required for proper completion workas per SI no. 305A

12 mm thick plaster with cement and coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less then 1cm including supply of all materials, labour, Tools & plants etc, required for proper completion workas . As per SI No. 584 (A)

Cement Concrete with 2 cm gauge approved stone grit, C/Sand & Cement in the Proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc, required for proper completion workas as per SI No. 279 (a)

(G-3)Providing, laying spreding & Compacting Machine crushed stone Ballast of Approved quarry of hand packing rolling with power roller 8 to 10 tone in stage to proper grade and camber applying and brooming with type B 11.2mm stone screening material bund to protect edges,ligting guarding Barricading etc.i/c cost of material labour T & P etc.

Construction of Un-reinforcement without dowel joint at expention and construction joint only plane cement concrete pavement, thickness as per design, over a prepare sub base with 43 grade Cement oe any other type as per clouse 1501.2.2 (1:1.5:3) course and fine aggregates confirming to IS 383 maximum size of course aggregates not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side from work (steel chanel, laying and fixing of 125 micron thick polythene film wedges, steel plates including leveling the farmwork as per drwing) spreading the concrete with shovels, curing the concrete slabs for 14days, curing compound (where specified) and water finishing to lines and grade as per drwaing with 2cm gauge approved stone in proportion M-30 in payment 15Cm thick CC road to complete the work as per direction in charge in also including comleting shifting of material & concrete As per new item -09(1)

Pro/fixing of M.S. sign board (weight 50.51kg.) made up of 40x40x6 mm3 angle iron (vertical post of length 2.75 m) 40x5 sq mm flat cross angle, 1mm thick M.S. sheet (1.2x0.90 sqm) including excavation of pit (0.45x0.45x0.45 m3), 10cm thick cement concrete 10:5:1 with brick ballast, fine sand cement,cast cement conrete 1:2:4 with cement c/sand & 20mm stone gritt (0.35x0.35x0.35 m3) both sid, two coat painting, letter writting upto 2.5 cm size(225Nos) etc complete as per standard drwaing & direction of E/I @ Rs 4800/- each

gst