Rural Engineering Department Tender

12 mm thick plaster with Cement and coarse sand of 2.20 fineness modules mortar in 1:4 over brick work minimum thickness not be less than 1cm. Including supply of all materials, labour, tools and plants etc. requared for proper complition of the work. S.I.No. 584 a

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per Clause 401. As per MORD Analysis.

Construction of un-reinforced, Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels , rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contracton and expansion, construction joints applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days, lines and grade as per drawing and Technical Specification Clause 1501(Rates are including all Taxes but excluding GST) UPPWD.SOR-2017 No. 20.14(a).

R.C.C. work with cement, coarse sand and 20 mm gauge approved stone grite in proportion of 1:1.5:3 in R.C.C. columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 .W.G.G.I binding wire and centering and shuttering and supply of all materials and labour and T&P etc. as per UP.P.W.D.SOR-2022 S.I.No.289

M.S tore steel or plain in plain work such as R C Cor R B work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & wastage,bend ,hooks and inluding cost of binding wire .SI NO 504

cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in proportion of 4:2:1 including supply of all maerial,labour tools& plants etc .required for proper completion of the work. complete asoer SI NO 279(a)

Supply and fixing of M.S. Sign board(weight 50.51kg) made up of 40x40x6mm angle iron(vertical post of length 2.75m), 40x5 sqmm flat cross angle, 1mm thick M.S.sheet(1.2x0.9sqm) including excavation of pit (0.45x0.45x0.45m3), 10cm thick cement concrete 10:5:1 with b/ballast,fine sand and cement, cast cement concrete 1:2:4 with cement ,c/sand & 20mm stone grite (0.35x0.35x0.35m3) both side, two coat painting , letter writting uoto 2.5cm size (225Nos) etc complete asper standard drawing & direction of E/I @ Rs....../ each.

Add GST 18% Rs