Rural Engineering Department Tender

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel 80-100 KN Static Roller in stages to proper grade and camber, applying and brooming,requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404.

R.C.C. work with cement, coarse sand and 20 mm gauge approved stone grite in proportion of 1:2:4 in R.C.C. columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 .W.G.G.I binding wire and centering and shuttering and supply of all materials and labour and T&P etc. as per UP.P.W.D.SOR-2020 S.I.No.283

M.S. ( Tor steel or plain) in plain work such as R.C.C. Work Iincluding cutting bending to proper shape complete including supply of all materials, labour T&P etc. required for proper completion of work As per UP.P.W.D.SOR-2017 S.I.No.504.

M-150 Brick work with 1:4 cement &coarse sand mortor in foundation and plingth including supply of all material, labour t&p etc . required for proper completion of work . as per UP.P.W.D.SOR-2022 S.I. No-305 (a).

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per UP.PWD.SOR-2022 S.I.No. 584.New item.

P/Laying of cement concrete with 20 mm gauge stone ballast, coarse sand & cement in the proportion of 1:1.5:3 including supply of all materials, labour. Tools& plants etc. required for proper completion of work. As per UP.P.W.D.SOR-2022 S.I.No. 279(b).

Construction of un-reinforced, Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels , rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contracton and expansion, construction joints applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days, lines and grade as per drawing and Technical Specification Clause 1501(Rates are including all Taxes but excluding GST) as per UP.P.W.D.SOR-2022 S.I.No.20.11 (a) New Item

Supply and fixing of M.S. sign board of prescibed size 1.20M x2.75M with angle 40x40x6mm iron angle and 1mm thick M.S. iron sheet including painting and letter writing complete all.