Rural Engineering Department Tender

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in foundation and plinth in 1:4 (1cement :4 coarse sand As per DSR 6.1.1

12mm Thick cement Plasterof mix 1:4 (1 cement :4 coarse sand ) as per DSR 13.4.1

Providing and Laying 125micron Polytheen sheet as per DSR 0323

Providing and Laying design Mix conc. M-30 grade, inroads/taxi tracks/ runways ,using cement content as per design mix, useing coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per approved & specified design criteria , providing dowel bars with sleeve/tie bars wherever required, laying at site , spreading and complacting mechanically by using needie and surface vibrators, levelling to required slope/camber,finishing with required texture, including steel form work with sturdy M.S. channel sections , curing, making provision for construction/expansion, costruction& longitudinal joints (10mm wide x50mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealannts, complete all(items of joint fillers,sealannts,dowel bars with sleeve/tie bars to be paid sparately)as per DSR 16.43.1

Reinforced cement concrete work in beams.suspended floors, roof having slope up to 150 landings, balconies , shelves,chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering , shuttering, finishing and reinforcement with 1:.1.5:3(1 cement : 1.5 Coarse sand (Zone III ) derived from natural sources : 3 graded Stone aggregate 20mm noinal size derived from natural sources (All work upto plinth)as per D.S.R.NO. 5.22.1

Steel work welded in built up sections/ framed work, including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as per D.S.R.NO. 5.25.2

Providing and fixing 18mm thick gang saw cut,mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as per DSR 8.2.2.2 Area of slab over 0.50 sqm

Letter writing on Granite Sign Board as per PWD Schudle 821