Rural Engineering Department Tender

R C C work with cement approved coarse sand and 2cm gauge approved stone grite in the proportion of 1:1.5:3 in Slab and stem of nala including supply of all materials, labour and T&p etc ,required for proper completion of the work SI NO 284 New Item

M.S (tor steel or plain) in plain work such as R.C.C work including cutting & bending to proper shape complete including supply of all material, labour, T&P etc. required for proper completion of work as per PWD S.I. No. 504

Construction of un-reinforced, Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels , rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contracton and expansion, construction joints applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days, lines and grade as per drawing and Technical Specification Clause 1501(Rates are including all Taxes but excluding GST) UPPWD.SOR-2021 No. 20.14(a).

supply & Laying 80mm thick c c Ruber mould interlocking tile in road work with 40mm thick fine sand layer . New item

Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut.