Rural Engineering Department Tender

Brick work with common burnt clay machine moulded brick of class designation 12.5 conforming to IS:2222 in super structure above plinth level up to floor five level in cement mortor 1:6. as per DSR code no. 6.3.2

Construction of granular sub-base by providing ready mix material spreading in uniform layers with motor grader on prepared surface and compacted with 80-100 KN Smooth wheel static rollar to achieve the desired density at OMC complete as per Technical specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of 53 mm to 22.4 mm sizes to water bound macadam (WBM III) specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(WBM III)

Cement Concrete Pavement: Construction of un-reinforceced ,dowel jointed at expansion and consruction joint only, plai cement concrete pavement, thickness as per design ,over a prepaired sub base withh 43 grade cement or any other type as per clouse 1501 .2.2. M-30 grade corse and fine aggregates confirming to IS:383 maximum size of coarse aggregates not exeding 25 mm mixed in a concrete mixer of not less than 0.2 cum. capacity and apropreate weigh batcher using approoved mix design laid in a approoved fixed site form work (steel chanel ) laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the form work as per drawing ,speading the concrete with shovels rackes, compacted using needle screed and plate vibrators and finished in continuous oparation including provision of contraction and expansion ,construction jointes, applying debonding strips, primer,sealant dowel bars ,near aproches to bridge /culvert and construction joints admixtures as approoved curing of concrete slab for 14 days.using curing compounds(where specified ) and water finishing to lines and grade as per drawing and technical specification clause 1501.

Making construction joint of 3to 5 mm. wide & 25 mm. deep joint fillig

12 mm cement plaster of mix 1:4cement F/sand mortor as per DSR code 13.1.1

Earth work in Filling in Embankment in B.C. or mooram mixed soil By tractor trolly 3km. Distance

Supply & fixing of signboard/marble name plate

( Rates in BOQ are exclusive of G.S.T. Amount )