Rural Engineering Department Tender

RCC work with cement approved coarse and and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintal of doors and windows excluding supply of reaiforcement and binding etc. slab work SI No. 284

M-150 Class brick work in 1:4 cement and coarse sand mortar in foundation and super structure including supply of all materials, labours and tools and plants etc. required for proper completion of the work. as per 305 (b)

12 mm thick plaster with cement morar in proportion of cement and approved coarse and in 1:3. As per SCH PWD SI No. 583

Interlockign Tiles- Rubber moulded reflective Zig-Zag 80mm. Providing and Laying of Interlocking concrete Block pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. As Per 1500 MORD Sepc. SCH. P.W.D. 6.70 Chapter-20 Road work

Mild steel or iron work in of small sizes and sections such as holding down bolts, Hold Fasts, Tie Rods, Gratings etc (When not i/c n an over all rates) wrought to required form, i/c supply of steel, bolts, nuts and wastages etc. and their fixing required for completion of the work. SI No. 502B

Mild steel or iron work in heavy sizes such as truesses. Builts up gates, door frames, recods racks roof work, gates etc. wrought to required from, lncluding drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts and wastages etc. and their fixing required for completion of the work. SI No. 503

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. Overhead informatory road signage DSR 16.60.1 Rateas DSR 5879.90 After Cost Index & Factor 5879.90×0.735×(107/107)

S/F Inaugration black Granite (Polished) 20 mm thick stone size 0.90×0.75 m including Lettering, Printing, border etc, will be painted of superior quality is required shade and colour incuding fixing excavation o foundation (1.40×0.50×0.40m), LCC 1:6:12 (1.40×0.50×0.10m), brick work 1:3 cement coarse and foundation (1.40×0.345×0.30m), Upto 1.40×0.23×1.35m), 12 mm thick Plaster 1:3 cement coarse sand and finishing walls with water proofing white cement paint of approved make and quality such as super snowcem paint etc. all complete.