Rural Engineering Department Tender

12 mm cement plaster of mix : 1: 4 (1 cement : 4 coarse sand) DSR 13.4.1

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. DSR -5.1.2

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.6

Centering and shuttering including stutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. As per DSR Code No- 5.9.1

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401.

Construction of unreinforced, dowel jointed at expansion and construction joints only, plain cement concrete pavement, thickness as per design, over a prepaired sub base, with 43 Grade cement or any other type as per clause 1501.2.2, M 30 (Grade), coarse and fine aggregates conforming to IS383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mixed design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film,wedges, steel plate, including levelling the formwork as per drawing), spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 .

Supply and fixing of granite sign board.