Rural Engineering Department Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rural Engineering Department - RED Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Mar 2025
Closing Date20 Mar 2025
Tender Amount₹ 12,10,00,000
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
Class A
Bid Capacity
... View More
The bid capacity required can be calculated using the formula: Assessed Available Bid capacity = (A*N*M - B), where A = Maximum value of Turn Over, N = Number of years prescribed for completion, M = 2.5, and B = Value of existing commitments. Alternatively, the bid capacity required is 10% of the contract value. Formulas include: Turnover indexed at 8% per year, 10% of the contract value, and one-third of the estimated cost of work. The minimum turnover required is one-third of the estimated cost of similar works. However, a more straightforward calculation is: Bid capacity required = 0.1 * contract value. Given values are: Maximum Turn Over required = Estimated cost of works = Rs. 1210.00 Lakh, Minimum Turn Over required = One Third of the estimated cost of similar works = Rs. 403.33 Lakh. Formulas are: Maximum Turn Over = Estimated cost of works, Minimum Turn Over = Estimated cost of similar works / 3.
Technical Capacity
... View More
The required prior work experience for the bidder includes achieving a minimum financial turnover and satisfactorily completing a similar work. The value of the similar work should be equal to one-third of the estimated cost of the work for which the bid is invited. The percentage of the turnover that should be from Civil Engineering construction works is at least 50%. The bidder should have satisfactorily completed as a prime contractor at least one similar work of value equal to one-third of the bid value, excluding maintenance cost. The similar work is defined based on the number of storied buildings, with specific requirements for each category. The annual financial turnover should be at least 100% of the estimated value of the work updated to the current price level, with at least 50% of the turnover coming from civil engineering construction works. The bidder should also have achieved a minimum annual financial turnover in any one year in the last five years, with a volume equal to 100% of the estimated value of the work updated to the current price level. The values like amount are not specified, but it is mentioned that one-third of the estimated cost of similar works is required. The bidding capacity of the bidder should be equal to or more than the estimated cost of the work put to tender, and it is calculated based on the maximum turnover in construction works executed in any one year during the last five years. For technical personnel, the required experience is as follows: - Project Manager: Graduate Engineer with 12 years of experience, including experience in one similar nature of work.
- Deputy Project Manager: Graduate Engineer or Diploma Engineer with 5 years of experience for Graduate Engineer and 10 years for Diploma Engineer.
- Project/Site Engineer: Graduate Engineer or Diploma Engineer with 2 years of experience for Graduate Engineer and 5 years for Diploma Engineer.
- Project Planning/Quality/Billing Engineer: Graduate Engineer with 10 years of experience. The bidder must demonstrate having experience and resources sufficient to meet the aggregate of the qualifying criteria for the individual contracts. The percentage of similar works completed is not explicitly mentioned.
Costs
EMD
₹ 24,20,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Under District-lucknow, Construction Of 200 Beded Hostel In The Campus Of Deen Dayal Upadhyay
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_REDUP_1001605_2Tender No
4315/SE RED LUCKNOW/Lucknow/24-25 Dt 10/01/2025Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. 2.25(a)
706.04
553
390694.29
... More
Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) 4.1.8
184.03
5381
990294.87
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 2.27
130.55
1677
219018.51
... More
Providing & injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints, surroundings of pipes and conduit etc complete (plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (part-II 1981) Aldrine emulsifiable concentrate or any other approved material such as hepthachlor or chlordance will be used.The rate of applications of chemical emulsion shall be as follows:- 1) Treatment for masonry & foundation 5ltr. Per Sqm. 2) back fill in immediate contract with foundation 7.5 ltr. per Sqm. 3) Treatment of top surface of plinth filling 5ltr. per Sqm. 4) Treatment of soil along external periMeter of building 7.5 ltr. per Sqm. 5) Treatment of soil under apron along external perimeter 5ltr. per Sqm. Sch.PWD 1
806.86
180
145234.8
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level, Concrete of M25 grade with minimum cement content of 330 kg/Cum. 5.33.1.1
531.2
7508
3988414.27
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein. 5.35
572.12
579
331503.49
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) 6.1.2
85.79
5634
483352.87
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22.6
2368.07
8519
20175127.58
... More
15 mm thick plinth plaster (1 cement : 4 coarse sand) 13.5.1
211.92
325
68929.1
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete 5.9.1
1018.46
309
315498.54
... More
Columns, Pillars, Piers, Abutments, Posts and Struts 5.9.6
2556.45
759
1941317
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 5.9.21
4792.53
665
3187511.7
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level, Concrete of M25 grade with minimum cement content of 330 Kg /Cum. 5.33.2.1
1202.51
7789
9366663.04
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. 5.9.20
4641.36
812
3770594.45
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 5.9.2
275.33
665
183243.13
... More
Weather shade, Chajjas, corbels etc., including edges 5.9.19
237.72
751
178603.79
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 Meter or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) 5.11.1
40.64
303
12337.49
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : :Cement mortar 1:6 (1 cement : 6 coarse sand) 6.4.2
701.88
7193
5048812.35
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) 6.13.2
3713.86
887
3296979.22
... More
Extra for providing and placing in position 2 No. 6mm dia. M.S. bars at every third course of half brick masonry. 6.15
3713.86
82
307470.47
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 13.4.2
7170.85
271
1946670.65
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 13.5.2
7898.84
312
2466886.72
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 11.56.2
283.59
2425
687986.5
... More
Providing and fixing 18 mm thick (Granite) gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 Sqm. 8.2.2.2
722.59
4057
2931865.57
... More
Providing edge double moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work 8.3.2
542.38
403
218920.84
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm. including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm 11.41.2
3233.27
1227
3967707.28
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm. including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm 11.46.2
509.83
1282
653668.34
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : :25 mm thick 11.26.1
22.81
1539
35105.27
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete 11.27
3.31
1860
6156.93
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 Kg/Sqm. including pointing the joints with white cement and matching pigment etc., complete. 11.37
416.09
866
360425.48
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm., including pointing in white cement mixed with pigment of matching shade complete. 8.31
1714.07
1001
1716846.79
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling and dressing & finishing the top smooth 4.17
120.69
591
71437.62
... More
Providing & fixing ISI marked flush door shutters conforming IS: 2202 decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 9.21.1
397.24
1890
750815.38
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). for double leaf 9.26
24.78
84
2088.71
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick 9.127.2
794.48
708
563151.26
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 9.23
33.4
365
12198.68
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides with second class Teak wood baatens. 9.51.1
758.28
1033
783712.71
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for grill by weight. 10.25.2
15164.7
136
2067706.85
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) by weight 10.15.1
23630.02
154
3643749.08
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. 10.30.1
758.28
841
637728.65
... More
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces 10.5.1
4.2
4585
19257.71
... More
Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour two coats 13.82.2
7170.85
112
808943.59
... More
Finishing walls with ready mixed Premium acrylic smooth exterior paint with silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 Sqm. over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm.) 13.47.1
7898.84
135
1067607.21
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.8
15069.69
123
1857640.69
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 14.34
217
214
46531.31
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm. Approved by SE
217
600
130200
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 300 mm x 10mm Approved by SE
491
500
245500
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
125 mm 9.165.1
982
94
92465.12
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 Kg/Sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
-
-
-
... More
c) After two days of proper curing applying a second coat of cement slurry using 2.75 Kg/ Sqm. of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 22.7.1
990.04
1330
1317505.63
... More
Supply & filling of cinder in sunken portion of building including breaking into required sizes including supply of all materials, labour etc. required for proper completion of work SOR Jhansi
114.08
1695
193365.6
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 Kg/Sqm. mixed with water proofing cement compound @ 0.253 Kg/ Sqm.. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 Kg/Sqm. mixed with water proofing cement compound @ 0.126 Kg/Sqm.. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 22.5
678.21
487
330586.68
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. 10.28
1540.29
610
939823.35
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 Sqm. over an under coat of primer applied @ 0.80 ltr/10 Sqm. of approved brand and manufacture 13.48.3
1036.34
134
139750.45
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sqm. (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm
-
-
-
... More
Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing periMeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and periMeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of periMeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 12.45.1
3233.27
1071
3462896.84
... More
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make 26.35.3
218.64
437
95580.66
... More
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer - In - Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the
multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5.45.1
33
4191
138310.26
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates/ moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). Roof Joint of 100 mm gap 5.46.1
47.2
4728
223181.42
... More
Providing and fixing 25 mm thick shutters for cup board etc. :
Panelled or panelled & glazed shutters :
Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws 14.26.1.2
722.19
3542
2558589.18
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid 17.2.1
103
5146
530138.94
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 17.7.4
103
1484
152901.44
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board 510x1040 mm bowl depth 250 mm 17.10.1.1
2
5486
10973.4
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 8.5
105
773
81178.65
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
Flexible pipe i) 32 mm dia 17.28.2.1
103
94
9727.32
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
Flexible pipe ii) 40 mm dia 17.28.2.2
2
94
188.88
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 17.32.4
103
1653
170297.11
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
103
855
88158.73
... More
Providing and fixing toilet paper holder : C.P. brass 17.34.1
103
634
65393.67
... More
Providing and fixing soil, waste and vent pipes :
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
100 mm O.D. 17.35.1.2
618
932
576433.32
... More
Providing and fixing soil, waste and vent pipes :
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
75 mm O.D. 17.35.2.2
630
936
590234.4
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
100 mm 17.59.1
124
110
13684.64
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
75 mm 17.59.2
126
71
8987.58
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Sand cast iron S&S as per IS - 3989
100 mm O.D. 17.38.1.2
103
557
57379.24
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Sand cast iron S&S as per IS - 3989
100 mm
75 mm O.D. 17.38.2.2
103
412
42537.97
... More
Providing and fixing heel rest sanitary bend 100 mm Shoe 17.40.1.2
15
433
6501.75
... More
Providing and fixing heel rest sanitary bend 75 mm Shoe 17.40.2.2
15
398
5975.55
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Sand cast iron S&S as per IS - 3989
100x100x100 mm 17.43.1.2
103
731
75319.78
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Sand cast iron S&S as per IS - 3989
75x75x75 mm 17.43.2.2
103
525
54112.08
... More
Providing and fixing plain bend of required degree. 100 mm dia 17.39.1.2
88
450
39627.28
... More
Providing and fixing plain bend of required degree. 75 mm dia 17.39.2.2
88
308
27146.24
... More
Providing and fixing single equal plain invert branch of required degree : Sand cast iron S&S as per IS - 3989 100 mm size 17.50.1.2
88
590
51987.76
... More
Providing and fixing single equal plain invert branch of required degree : Sand cast iron S&S as per IS - 3989 75 mm size 17.50.2.2
88
454
40003.04
... More
Providing and fixing terminal guard :
Sand cast iron S&S as per IS - 3989
100 mm size 17.56.1.2
25
399
9993
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
Sand cast iron S&S as per IS: 3989
100 mm inlet and 100 mm outlet 17.60.1.1
103
1577
162445.42
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
Sand cast iron S&S as per IS: 3989
100 mm inlet and 75 mm outlet 17.60.2.1
105
1560
163829.4
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. 17.71
103
132
13697.97
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 17.73.2
103
560
57684.12
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
20 mm nominal outer dia pipes 18.10.2
309
345
106744.05
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
25 mm nominal outer dia pipes 18.10.3
309
435
134668.38
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
32 mm nominal outer dia pipes 18.10.4
206
526
108541.4
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
40 mm nominal outer dia pipes 18.10.5
103
641
66060.08
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
50 mm nominal outer dia pipes 18.10.6
103
828
85299.45
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
20 mm nominal outer dia Pipes 18.7.2
412
264
109027.56
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
25 mm nominal outer dia Pipes 18.7.3
309
317
98017.89
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
32 mm nominal outer dia Pipes 18.7.4
206
409
84416.74
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
40 mm nominal outer dia Pipes 18.7.5
103
555
57195.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
15 mm nominal outer dia pipes 18.8.1
1456
393
572557.44
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
20 mm nominal outer dia pipes 18.8.2
1456
424
618334.08
... More
Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work
40 mm dia, nominal bore 18.12.5
100
487
48744
... More
Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work
50 mm dia, nominal bore 18.12.6
50
602
30103
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
25mm dia, nominal bore 18.17.1
16
491
7866.72
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
32 mm dia, nominal bore 18.17.2
8
544
4358
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
40 mm dia, nominal bore 18.17.3
4
652
2610.32
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
50 mm dia, nominal bore 18.12.6
2
811
1622.02
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore 18.13.1
40
720
28814.4
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
15 mm nominal bore 18.21.2.1
309
77
23860.98
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter 18.22.1
103
153
15780.63
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
20 mm nominal outer dia pipes 18.38.2
313
18
5749.81
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
25 mm nominal outer dia pipes 18.38.3
309
23
7385.1
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
32 mm nominal outer dia pipes 18.38.4
206
28
5914.26
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
40 mm nominal outer dia pipes 18.38.5
103
33
3470.07
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
50 mm nominal outer dia pipes 18.38.6
103
40
4149.87
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15 mm nominal bore 18.18.1
103
321
33103.17
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20 mm nominal bore 18.18.2
2
365
730.7
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
15mm nominal bore 18.46.1
20
251
5029.6
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
20mm nominal bore 18.46.2
20
273
5479.2
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
25mm nominal bore 18.46.3
10
346
3469.9
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
32mm nominal bore 18.46.4
6
386
2317.98
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
40mm nominal bore 18.46.5
4
498
1994.8
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)50mm nominal bore 18.46.6
4
650
2603.04
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931
15mm nominal bore 18.49.1
103
400
41236.05
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15mm nominal bore 18.51.1
105
631
66268.65
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931
15 mm nominal bore. 18.53.1
309
453
140184.03
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating Each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.10.1.2
560
278
155780.8
... More
Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P. Required for proper completion of the work. 160 mm O.D. Approved By S.E. Sir
150
1190
178500
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 160/150 mm diameter pipe 19.2.2
300
932
279609
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 19.4.3.1
24
2213
53125.68
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design :
(a) Inside size 900 x 800mm and 500mm deep including C.I. Cover frame. 19.7.1.1
25
10088
252203.5
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design :
(b) Inside size 1200 x 1200mm and 1.0Meter deep including C.I. Cover frame. 19.7.2.1
4
20859
83436.44
... More
Extra over Item No. 24.27 for every additional depth of 0.10 Meter or part there of main hole.
(a) Size 900 x 800 mm 19.8.1.1
20.1
6971
140130.17
... More
Extra over Item No. 24.27 for every additional depth of 0.10 Meter or part there of main hole.
(b) Size 1200 x 900mm 19.8.2.1
2.4
8362
20068.92
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 40mm nominal bore. 18.12.5
70
487
34120.8
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
40mm nominal bore. 18.17.3
2
652
1305.16
... More
Constructing brick masonry chamber 600 x 600 x 750 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diaMeter, 160 mm bottom diaMeter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.33.1
2
8580
17161.58
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 Meter 2.20.1
260
56
14799.2
... More
Providing and laying Non pressure NP 2 class (medium duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc. complete. 150 mm. dia. RCC Pipes 19.6.2
260
439
114288.2
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. 19.3.2
260
587
152622.6
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 19.16
136
437
59486.4
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 5.3
6.23
9088
56623.29
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. With 20x20 mm square bar 19.15.1
22
430
9466.38
... More
Providing and fixing S.C.I. tee at the inlet and outlet of septic tank. 7087
4
621
2484
... More
Providing & fixing 75mm dia vent pipes. Sand cast iron S&S pipe as per IS: 1729 17.35.2.1
2
825
1650.6
... More
Providing & fixing of 75mm dia sand cast iron terminal guard. 17.56.2.1
2
269
538.28
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. HD . -20- Circular shape 560mm internal diameter 19.19.3.1
2
1323
2647.44
... More
Making soak pit 2.5 m diaMeter 3.0 Meter deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diaMeter, 1.8m long complete as per standard design. With F.P.S. bricks 19.32.1
2
21219
42439.3
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Meter depth below ground level. All types of soil 400 mm dia 23.1.1.3
120.6
782
94392.41
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing(CM) pipe of required dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia 23.3.3
20
879
17589.8
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia 23.4.3
10.6
991
10514.56
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 23.5
5
1192
5963.35
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 23.6
5
1215
6075.75
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 23.7
6.26
1215
7601.98
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. 23.8
12.78
1599
20440.14
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge. 23.12
96
857
82285.44
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia 23.13.2
1
194
194.68
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part I). 150 mm dia 23.15.2
1
254
254.36
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
150 mm nominal size dia having minimum wall thickness 5.00 mm 23.10.2
150
1557
233698.5
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 19.30.3.1
8
7579
60632.72
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 19.27.1
16
4706
75303.36
... More
15 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1 cement : 4coarse sand) 13.8.2
8.28
377
3125.87
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.25.2
50.64
136
6904.76
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 Meter below ground level. 400 mm dia 23.2.1.3
160
978
156537.6
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia 23.13.2
1
253
253.69
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 23.14.3
1
1811
1811.88
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 23.15.3
1
282
282.49
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia 23.11.3
240
2031
487442.4
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 18.12.8
150
822
123435
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 6 sq mm x 2 core 20a.1.1 SOR
80
426
34103.2
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 2 X 6 sq. mm (19mm) 9.1.1
2
189
378.72
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) 4.1.10
5.45
5149
28064.18
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25 . 26.5mm to 9.5mm @ 35% 9.5mm to 2.36mm @ 25% 2.36mm below @ 40% 16.78.2
142.2
2310
328551.68
... More
Polythene sheet (125 micron) As per material rate M-104
948
15
14220
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/Cum.. Excess/ less cement used as per design mix is payable/ recoverable separately.
Cement concrete prepared with batch mixing machine 16.43.1
142.2
8317
1182775.52
... More
Providing and fixing in position pre-moulded joint filler in expansion joints. 16.45
2380
4
9972.2
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. 16.46.1
2380
6
16255.4
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C 1.10.3
1072
1210
1297195.04
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1.11
11
1288
14172.84
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 1.12
2808
275
773604
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1.14.1
2335
192
448763.65
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 1.14.2
7306
226
1657293.04
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 1.14.4
2600
362
941512
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire 1.14.9
410
621
254999.5
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 1.14.10
1300
828
1077687
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 1.21.1
20
105
2111.6
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch 1.24.1
19
84
1614.24
... More
3 pin 5/6 A socket outlet 1.24.4
19
100
1911.97
... More
Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.6
1
122
122.08
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 1.25
133
304
40481.21
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 1.26
430
32
14185.7
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm) 1.27.1
1
245
245.81
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 1.31
349
393
137317.54
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 1.32
117
483
56554.29
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep 1.50.1
210
371
77949.9
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 1.18.2
35
31
1096.9
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 10.18
133
182
24207.33
... More
Installation ,Testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLSH PVC insulated , copper conductor , single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required 1.45
133
279
37190.79
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. 1.51
105
170
17928.75
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point) 1.57
106
599
63566.08
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required. 1.58
119
90
10798.06
... More
Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way (4 + 12), Double door 2.4.1
10
3374
33745.2
... More
Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way (4 + 18), Double door 2.4.2
28
4102
114880.36
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (4 + 12), Double door 2.5.1
12
6196
74356.56
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole 2.10.1
624
211
131770.08
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 2.11
8
10
85.76
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2.2.13
12
6370
76445.04
... More
Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. CAT A 1016
48
1780
85440
... More
Supply and fixing of 40 Amp. FP MCB (10 KA) C Curve. CAT A 1020
38
2275
86450
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2.21
4
221
887.56
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 5.6
6
11414
68486.76
... More
Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified. 726 B
18
11700
210600
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 5.8
90
801
72159.3
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 5.9
910
118
108089.8
... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. 5.20
120
1742
209152.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness 4.6.2
40
590
23624
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
225 mm width X 50 mm depth X 1.6 mm thickness 4.6.3
60
738
44295
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
300 mm width X 50 mm depth X 1.6 mm thickness 4.6.4
60
794
47660.4
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.
100 mm dia 14.13.3
30
1489
44691
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 19.1
133
2251
299500.04
... More
Supply& Errection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switchboard shall be of cat A & B Only. CAT. B Cubicle Type Incoming - 400 Amp MCCB - 1 No.
Outgoing - 100 Amp 4P MCCB - 5 Nos. (to power Vtpn d.b.) 40 Amp 4P MCCB - 2 No. 63 Amp 4P MCCB - 2 No. (PWD SOR 2024) 20.1.3.a
1
251418
251418.64
... More
EMERGENCY LIGHT Panel : Incoming - 200 Amp MCCB - 1 No.
Outgoing - 100 Amp 4P MCCB - 5 Nos. (to Light Vtpn d.b.)
40 Amp 4P MCCB - 1 No. (PWD SOR 2024) 20.1.2.a
1
155055
155055.08
... More
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
2620 system lumens 120 Lm/W, PF0.95, THD 10% at full load CRI 80, Sheet thickness min. 0.8 mm , tube with aluminium heat sink, 300 V over voltage Protection 2.5 KV internal Surge Protection with (5 Year Warrenty) 23.07
227
995
226037.52
... More
Supply & fixing of IP 20, Frount Mid Power SMD type LED Light Recess mounting round 12 to 15 Watt Cut out Min 125 mm, Height Min 40mm/ Led Down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA
1440-1800 system lumens 120 Lm/W, PF0.95, THD 10% at full load CRI 80, 300 V over voltage Protection 2.5 KV internal Surge Protection with (5 Year Warrenty) 23.03
276
1750
483234.6
... More
Supply & fixing of IP 20, Frount Mid Power SMD type LED Light Surface mounting round 10 to 15 Watt Cut out Min 150 mm, Height Min 40mm/ Led Down Lighter having Powder coated die cast aluminium housing with heat sink , High purity transmisivity UV Stablized Non yellowish diffuser /reflector for uniform light distribution detachable driver set suitable for 24 Hr Continous Opertion complete in all respect.CAT. - AAA 1200-1800 system lumens 120 Lm/W, PF0.95, THD 10% at full load CRI 80, 300 V over voltage Protection 2.5 KV internal Surge Protection with (5 Year Warrenty) 23.02
108
1281
138386.88
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 25 sq mm x 3-1/2core 20a.10
380
555
211264.8
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 35 sq mm x 3-1/2core 20a.11
100
613
61359
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 50 sq mm x 3-1/2core 20a.12
200
729
145940
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge, complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 300 sq mm x 3-1/2core 20a.19
200
2322
464430
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 25 sq. mm (28mm) 9.1.20
17
258
4389.06
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 35 sq. mm (32mm) 9.1.21
6
304
1826.22
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 50 sq. mm (35mm) 9.1.22
10
340
3406.7
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 300 sq. mm (70mm) 9.1.30
8
985
7885.68
... More
Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. 1136
8
2550
20400
... More
Supplying, installation, testing & commissioning of smoke detector with built in LED and mounting base complete with all connections etc. as required. 17.1.2
65
951
61819.55
... More
Supplying, installation, testing & commissioning of manual call box of MS Construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 17.1.3
10
390
3909.9
... More
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. 17.1.5
10
161
1616.7
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in MS box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. 17.1.6
10
459
4594.5
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 6 Zone 17.1.9.2
2
10045
20090.38
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system. 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 Set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 Set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 Set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 60 AH Each sealed maintenance free batteries -1 Set. 17.1.10
1
58061
58061.33
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 17.5.2
1275
142
181942.5
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. 17.5.4
15
43
655.8
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required : Terrace Pump a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head 18.4.1
1
84019
84019.79
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25 mm dia 18.7.1
20
613
12274
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
80 mm dia 18.7.6
35
1554
54420.45
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
100 mm dia 18.7.7
115
2107
242365.95
... More
Supplying and fixing single headed Internal Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Stainless steel 18.9.2
9
5063
45574.56
... More
Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
80 mm dia 18.11.4
1
4109
4109.47
... More
Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia 18.11.5
3
5499
16498.11
... More
Supplying and fixing Orifice Plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 18.13
3
1089
3268.92
... More
Providing, installation, testing and commissioning of Non-Return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
80 mm dia 18.14.4
1
6344
6344.03
... More
Providing, installation, testing and commissioning of Non-Return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
100 mm dia 18.14.5
3
9114
27344.22
... More
Providing, installation, testing and commissioning of stainless steel Y-Strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
100 mm dia 18.15.2
1
5496
5496.89
... More
Supplying and fixing 63 mm dia, 15 m long RRL Hose Pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Stainless Steel (Grade 304) 18.16.2
18
3668
66041.82
... More
Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m 18.17.1
9
7155
64401.21
... More
Supplying & fixing 63 mm dia gun metal short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:
Stainless Steel (Grade 304) 18.18.2
9
1370
12338.28
... More
Supplying and fixing of Fire Brigade Connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way - 100 mm dia M.S. Pipe 18.19.1
1
5561
5561.23
... More
Supplying and fixing Air Vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 18.20
1
15048
15048.81
... More
Providing & fixing of Pressure Switch in M.S. pipe line including connection etc. as required. 18.22
1
1275
1275.24
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 5.4
4
6163
24653.52
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 5.12
120
236
28408.8
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1131 A
20
9100
182000
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1132
20
11980
239600
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. 1133
2
490
980
... More
Providing & fixing carbon steel Fire Man Axe with rubber insulated handle tested to 20000 volts. Approved by SE
9
2350
21150
... More
Providing and Fixing of Self illuminated /Auto Glow Exit Signs printed on photo-luminescent sheet containing self illuminated base chemical,of appropriate size not less than 100x300mm,suspended from ceilling or fixed to the walls with accessories as riquired and as directed at site. Approved by SE
15
5000
75000
... More
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Single Arm bracket (1 Mtr length)in 1:2:4 RCC foundation boult including the cost of foundation, excavation & back filling and Required T&P completee in all respect. including Labour 21.2.6
9
15988
143900.82
... More
Supply and fixing of LED Street light Fitting mandstory driver set having die cast aluminium body with toughend glass/UV stablized PC Cover and lenses suitable for 75 to 90 Watt. Confirming to IP 66 Protection and Ik07 and above protection having company logo Engravedcomplete in all respects. CAT AAA 9000- 10800 system lumens high power LED with lenses 120 Lm/W, PF0.95, THD10% at full load CRI 70, potteddriver set ( not circuitory) with (3 Year Warrenty) 23.16
9
8579
77216.94
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole 2.10.1
9
216
1952.55
... More
supply and fixing following capacity of automatic street light cubicle control pannel with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 seeries with contactors, HRC fuse, isolating switch, metering instrument and instrument box with CTs etc. complete in all respect.
40 A TPN 807F (II)
1
29300
29300
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 6 sq mm x 2 core 20a.1
145
426
61812.05
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size
size 10 sq mm x 4 core 20a.8
450
489
220437
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
2 X 6 sq. mm (19mm) 9.1.1
30
197
5939.1
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
4 X 10 sq. mm (25mm) 9.1.32
36
221
7988.04
... More
Main L.T. Panel :
Supply& Errection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entrise Electrical control panel with TPN ACB (65 KA, 4Pole Elect draw out, Micro processer Release IPR2) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter,Selector switches for ammeter and Voltmeter, instrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with detEachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfomers and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm.Cubicle type switch board shall be of CAT A & B Only. CAT. B Cubicle Type Incoming - 800 Amp ACB - 1 No. Outgoing - 400 Amp 4P MCCB -1 Nos. (to main building light Panel) 200 Amp 4P MCCB - 1 No. 100 Amp 4P MCCB - 1 No. 100 Amp 4P MCCB - 1 No. 63 Amp 4P MCCB - 2 No. (for spare) (PWD SOR 2024) 20.2.1.c
1
643816
643816.95
... More
Indoor Type 400A AMF Panel cum Emergency LT Panel Incomer : 400A FP (50kA Ics) MCCB with O/L & S/C Protection Release and with Extended Rotary Handle – 2 Set ATS : 400A FP Automatic Transfer Switch with AMF Logic circuitory – 1 Set Metering (Incoming ) : Multifunction Meter showing all Electrical Parameter along with Phase Indicating Lights, Current Transformer, Control MCB etc.- 2 Sets Outgoing - 400 Amp 4P MCCB - 1 No. ( EMERGEMCY PANEL PANEL) 200 Amp 4P MCCB - 1 No. 100 Amp 4P MCCB - 2 No. 63 Amp 4P MCB - 2 No. (for spare) (PWD SOR 2024) 20.1.3b
1
221463
221463.56
... More
Armoured Cables (Cable/Gland/Lug) : Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top . On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size
150 sq mm x 3-1/2core 20a.16
100
1318
131871
... More
Armoured Cables (Cable/Gland/Lug): Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top . On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 185 sq mm x 3-1/2core 20a.17
100
1577
157720
... More
Armoured Cables (Cable/Gland/Lug): Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top . On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size size 300 sq mm x 3-1/2core 20a.19
160
2322
371544
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 150 sq. mm (50mm) 9.1.26
4
574
2299.72
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3½ X 185 sq. mm (57mm) 9.1.27
4
721
2887.04
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
3½ X 300 sq. mm (70mm) 9.1.30
8
985
7885.68
... More
11 KV Cable & Termination :
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 sq. mm 10.4.2
2
12346
24693.12
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
120 sq. mm 10.5.2
2
16579
33159.52
... More
Supply and layingof 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.
120 sq. mm 3 core 20a.2.3
67
2125
142410.51
... More
Supply and Fixing of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules 1109
8
85
680
... More
Supply and Fixing of shock treatment chart.prescribed as per I.E. Rules.duly framed with glass and supported from back with hard board or shoft board with supply of all material ,labour,T&P for proper completion of work. 1134
6
305
1830
... More
Supply and Installation of 10 HP Submersible pump set with 1000 LPM discharge complete pipes with fittings
1
103500
103500
... More
Earthing and Lighting Conductor
-
-
-
... More
Supply and fixing of Advanced piezoelectric cermic based lighting protection system suitable of protection of building against direct lighting strike complete with early streamer emission with piezoelectric device for corona effect , stainless steel lighting conductor air terminal with event counter with sensitivity 1 KA to 100 KA for 8/20 micro second impulse without additional power supplies requirement required saint elmo lighting conductor with Discharge Counter & Elevation Rod ( Steel Kit with Discharge Counter )
1
262275
262275
... More
Supply and fixing of DMC Insulator for Support of G.I. Strip
240
65
15600
... More
Supply and Rust proof , Heavy duty weather proof poly plastic earth pit chamber with all accessories complete
3
860
2580
... More
Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with PVC Blade (PVC bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect.
108
2250
243000
... More
Providing & fixing dial type (150 mm dia) Pressure Gauge with isolation ball valve suitable for working pressure of 250 PSI cost shall be of inclusive of providing any short pieces, nipples, elbows etc as required. having calibration of 0-14 Kg/cm2.
9
2950
26550
... More
Providing & fixing cast iron air release valve of 25 mm dia including 25 mm dia Ball valve with fittings etc. as per the requirement.
9
1759
15835.5
... More
Control Panels (for Terrace Pump) : Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :63 Amp, 35kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. -2 Sets
1
29250
29250
... More
Transformer Set (500 kVA) :Providing, erecting, testing & commissioning approved make oil immersed naturally ONAN cooled, double wound, core type indoor copper wound 11 kV/ 433 Volts Step Down Transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed and OFF Load Tap Changer continuously rated for a full temperature rise in oil not exceeding 40 deg. C at maximum ambient temp. Of 50 deg. C complete with necessary radiator first filling of new transformer oil & standard fitting as below complying with I.S. 1180 LEVEL 3 standards On load tap changing range steps -10% to 5% on H.V in steps of 2.50% .and L.V. for variation should be provided The H.V. shall be connected delta & secondary with star connection. The transformer should have cable-end boxes on H.T. side & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers. Losses As per IS 1180 LEVEL-2.
-
-
-
... More
1. Coservator with plain oil level gauge and oil drain plug 1nos.
-
-
-
... More
2. Top filter valve 1 Nos.
-
-
-
... More
3. Bottom filter-Cum-drain valave 1Nos..
-
-
-
... More
4. Rating and diagram plate 1nos.
-
-
-
... More
5. Earthing Terminals 2Nos.
-
-
-
... More
6. Thermometer pockets 1Nos.
-
-
-
... More
7. Lifting Lugs 2/4 Nos.
-
-
-
... More
8.Air release plug 2/4 Nos.
-
-
-
... More
9. Bi-directional rollers 4Nos.
-
-
-
... More
10.Jacking pads 1Nos.
-
-
-
... More
11.Presure relese valve 1Nos.
-
-
-
... More
12. Separate Bare LV neutral 433V
-
-
-
... More
13. Detachable/Fixed type radiators 1Nos.
-
-
-
... More
14. Magnet Oil level gauge
-
-
-
... More
15. Oil temperature indicator 1Nos.
-
-
-
... More
16. Winding temperature indicator 1Nos.
-
-
-
... More
17. Marshlig Box single window 1No.
-
-
-
... More
18. Double flot buchholz's relaywith alarm and trip contact.
-
-
-
... More
COPPER WOUND 500 KVA 11/.433V
1
1630029
1630029
... More
HT VCB Panel : S.I.T.C. of VCB's Indoor Type as per latest specification of UP Power Corporations, make prefered Cromptron, Schneider or any Equivalent make approved by UP Power Corporation. Including construction of Plinth and earthing etc. with all material as per Technical Requirment. with 05 years warranty.11 KV incoming
1
404218
404218.63
... More
11 KV Outgoing
1
395189
395189.82
... More
Capacitor Bank Panel : (150KVAr) Supply, installation, testing & commissioning of 150 KVAr Floor mounting cubical type well ventilated Automatic Power Factor Correction Panel made of 14/16 SWG CRCA sheet steel duly Powder coated with suitable rating aluminium bus bars with PVC heat shrink sleeves & mounted on non hygroscopic supports including interconnections with copper conductor cables of suitable rating & automatic / manual operation of capacitor bank (3 phase 415 volts 50 Hz. A.C. Supply) in required stages. The capacitor banks shall be housed within panel itself. The panel shall consist of all necessary switchgears i.e. MCCB / MCB, heavy duty capacitors, contactors, 3 CT sensing APFC Relay, meters, indicators, auto / manual mode selector switches etc. as required. All switchgears shall be of reputed make i.e. L&T / Epcos or similar superior Make.
1
318193
318193.8
... More
Add Extra For RCC Foundation Work for Transformer Set Including Cost of Exaust Pipe with Structure and Other Misc. Work and T&P etc. Complete in all respect as per directed by Engineer In-Charge.
1
45000
45000
... More
Providing & Fixing of 1.6 mm thick M.S/Door Frame, Door capable of accommodating fire Hose Reel, Landing Valve, Hose Pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making Recessed type mansoary box (by civil contractor).1500x900 mm (Indoor Cabinet) Only Frame
9
9500
85500
... More
20 Passenger Lift : Supply Installation, Testing & Commissioning of 20 Passangers, 884 Kg, 1.5 mps. Automatic Elevator, with VVVF and Microprocessor based Simplex Collective Selective with/without Provision of attendant control. Separate Landing Push Button Box for all Landings with scrolling indicator. with provision of Attendant control , having 05 stops , 05 Openings, with SS Cabin (Hair Line Finish) having Cross flow fan for Ventillation , having sleek (SS hair Line finish-PVC) and LED small Circular lighting all complete.
1
2039565
2039565
... More
LAN SYSTEM: Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
3983
44
179115.51
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
3172
100
320340.28
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) (1.27.1)
204
245
50145.24
... More
Supply & Fixing of LAN socket outlet modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. Complete in all respect.
204
130
26520
... More
Supply, Installation, Testing and Commissioning of Access layer 2 Switch 24 Giga 2 x 1G SFP+ LAN Base Switch with 1 Year Service Support Make: Cisco/Aruba/Netgear/Eqlt
4
67180
268720
... More
Supply, Installation, Testing and Commissioning of 24 Port Patch Panel CAT 6 Make: Schneider/D-Link/AMP
4
12525
50100
... More
Supply, Installation, Testing and Commissioning of Information Outlet 1 Port. Make: Schneider/D-Link/AMP
96
570
54720
... More
Supply, Installation, Testing and Commissioning of Gigabit Patch Cord 1 Mtr Make: Schneider/D-Link/AMP
96
287
27552
... More
Supply, Installation, Testing and Commissioning of 6 port LIU with SC Adaptor fully loaded with pigtel for fiber termination box Make: Schneider/D-Link/AMP
4
11780
47120
... More
Supply, Installation, Testing and Commissioning ofof 19" Rack, wall mount 12 U Height Make: Comrack/Rittal/D-Link
4
12775
51100
... More
Supply, Installation, Testing and Commissioning of LC SC fiber MM patch coard Make: Comrack/Rittal/D-Link
8
1450
11600
... More
WIFI SYSTEM : Supply, Installation, Testing & Commissioning of Wi-Fi Controller with management software and licenses along with necessary accessories as per technical specifications
1
15550
15550
... More
Supply, Installation, Testing & Commissioning of Indoor Wireless Access Point with necessary accessories as per technical specifications
1
14315
14315
... More
Supply, Installation, testing, commissioning of interconnection of all access points through with all industry standard accessories such as Racks, PVC Conduit, UTP Cables, Patch Panel, Patch Cord, Cat-6 cables, cable laying accessories , electrical work etc.
1
14812
14812.5
... More
CCTV System : Supply, Installation & testing of Outdoor/Indoor 1080p HD indoor IP dome camera with 1/2.8" CMOS sensor pixel 1920 x 1080, IR on at 30IRE, 1/30s, 30fps, IR - 30 mtr, dynamic range 90db, true day/night, automatic electronic shutter, video compression H.264, motion/tamper, privacy mask, motion detection, auto varifocal lens 3 to 9 mm lens, audio - 1/1 channel in/out, full duplex audio, audio compression AAC, G.711, memory card slot (support up to 64GB), ONVIF profile S, CE, UL, FCC certified.
40
4850
194000
... More
Supply, Installation & testing of Outdoor/Indoor 1080p HD indoor IP Bullet camera with 1/2.8" CMOS sensor pixel 1920 x 1080, IR on at 30IRE, 1/30s, 30fps, IR - 50 mtr, dynamic range 90db, true day/night, automatic electronic shutter, video compression H.264, motion/tamper, privacy mask, motion detection, auto varifocal lens 3 to 9 mm lens, audio - 1/1 channel in/out, full duplex audio, audio compression AAC, G.711, memory card slot (support up to 64GB), ONVIF profile S, CE, UL, FCC certified.
30
4940
148200
... More
Supply, Installation, Testing & Commissioning of 16 Channel Network Video Recorder with specifications as follow: Supported Image Format h.264 , H.265, MPEG-4, JPEG, M-JPEG; Supported Image Resolution 1920x1080, 1,280 x 960, 960 x 720, 640 x 480, 320 x 240; Maximum Number of Cameras 32; RAID 5, 320MBps incoming bandwidth Camera Control Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode GUI REC/Playback Control REC, PLAY, Rev PLAY, Pause; Network Interface Camera port: 10Base-T / 100Base-TX Min 4x 6TB can be installed. Certification: UL, CE, BIS, FCC.
2
68000
136000
... More
15U rack with all accessories
2
14237
28474
... More
Supply and laying of 3 core 1.5 sqmm copper cable unarmoured
1750
105
183750
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm(1.21.2)
725
114
82947.25
... More
Supply, installation and commissioning of workstation latest intel i7 11th generation processor, intel chipset motherboard, 16GB DDR3 RAM, 3 TB SATA HDD at 7200 rpm, graphics card 2GB dedicated RAM with dual display ports DVI/HDMI port, DVD writer, Giga LAN card, keyboard, optical mouse as per list approved makes TFT monitors 21inch or bigger.
1
85600
85600
... More
SITC of 65" flat screen HD professional LED suitable for 24x7 operation with remote control and wall mount unit / floor stand complete with making connection etc as per list of approved makes.
1
93750
93750
... More
Supply, installation and testing of UPS 1 KVA capacity.
1
34700
34700
... More
DG SET Supply, Installation, Testing & Commissioning of 03 phase volts 50 cycle per second 1500 RPM air cooled, diesel generating set complete with silent type DG canopy & limiting sound level to 75 dB (A) over a distance of one meter with engine, alternator air cooled. The engine shall be complete with flywheel to suit flexible coupling with guard, air cleaner, fuel pump, fuel day tank, variable speed governor, fuel filter, lube oil filter, battery charging generator, voltage regulator, 24 volt charged voltage regulator, capacity and instrument panel comparing switch with key, space heater, lube oil temperature gauge, lube oil pressure gauge, water temperature gauge, battery charging ammeter, safety control for low lube oil pressure and high temperature tripping. DG Set with AMF Control Panel 150 KVA
1
1369478
1369478
... More
Supply & Installation of split direct expansion air conditioners suitable for operation on AC supply single phase 50Hz 230 V with hermetiaclly sealed compressor, with air colled condenser with DC inverter technology, motor capacitor and start run capacitors,relay and over load protection unit,with one indoor and outdoor unit wiil be plaved outside the room on the tessace to avoid noise including standard lenght of suitable size copper tubing covered with insulation tube ( High wall chorded/cordless) suitable capacity 3 Core sheathed /PVC copper cable and a operated wireless remote unit 1.5 TR. ( BEE 5 Star Rated )
107
46000
4922000
... More
Supply & installation testing commissioning of Voltage Stabilizer 4 KVA Complete in all respect.
107
4500
481500
... More
Supply. installation testing and commissioning of interconnecting high pressure copper refrigerant piping work suitable for refrigerant R 410A duly insulated with elastomeric nitrile rubber type tubular insulation of density 55+/- 10% Kg/m3 between indoor & outdoor units as per specifications.6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
873
245
213885
... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
873
466
406818
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%