Rural Engineering Department Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rural Engineering Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Jun 2023
Closing Date15 Jun 2023
Tender Amount₹ 1,58,64,000
Costs
EMD
₹ 3,18,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_REDUP_809374_3Bid Award Id
ViewTender No
118/SE RED DEVIPATAN/Shrawasti/22-23 Dt 24/5/23Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255
19.07
15446
810
... More
Providing and injecting chemical emulsion for preconstruction antitermite treatment and creating and barrier under and around the columns pits,wall trenche basement excavation top surface if plinth filling junction of wall and floor,along the external permeter of binding expansion joints,surrounding of pipes and conduit etc.complete (plinth area of the building at ground floor only shall be as per I.S.6313 (part II 1981) Aldrine emulsiable concentrate or any other approved material such as Hepthachlor or Chlordane will be used.The rate of application of chemical emulsion shall be as follows:-
-
-
-
... More
(1) Treatment for masonry and foundation 5 litres per sq.M.
-
-
-
... More
(2) Back fill in immediate contact with foundation 7.50 litres per sq.M.
-
-
-
... More
(3) Treatment of top surface of plinth filling 5 litres per sq.M.
-
-
-
... More
(4) Treatment of soil along external perimeter of building 7.50 litres per sq.M.
-
-
-
... More
(5) Treatment of soil under apron along external perimeter 5 litres per sq.M.
-
-
-
... More
As per schedule of rate (S.E.P.W.D. Ayodhya)
189.79
34162
180
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
28.81
227599
7900
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
20.21
119239
5900
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
1.48
8880
6000
... More
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
357.26
70630
197.7
... More
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
40.97
254833
6220
... More
1st floor
39.27
246701
6282.2
... More
For 2nd floor
39.27
249168
6345
... More
For 3rd floor
39.27
251661
6408.5
... More
For 4th floor
5.09
32945
6472.6
... More
M-150 class brick work in 1:4 cement and coarse sand 2.25 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(b),309 & 310(a)
20.95
129052
6160
... More
For 1st floor
9.57
59540
6221.6
... More
For 2nd floor
9.57
60136
6283.82
... More
For 3rd floor
9.57
60737
6346.66
... More
For 4rth floor
7.18
46024
6410.13
... More
Cost cement concrete door sills chaukhats,boundary post,shalves and similar work with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:2:4 excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.282
5.11
49056
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
42.97
441014
10263.3
... More
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
76.65
817341
10663.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lighter beams i.e.having span upto 6.00m excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.285(b).
41.35
442994
10713.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.287.
36.9
356575
9663.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
44.78
479146
10700
... More
Boring,Providing and installing 300 mm dia cast in situ single under reamed piles of specified diameter and length below pile cap in cement concrete1:1½:3 (1cement:1½ approved coarse sand : 3 graded stone aggregate 20 mm nominal size)to carry a safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc.all complete.(Length of pile for payment shall be measured upto to the bottom of pile) as per DSR No.20.3.1
564
1265898
2244.5
... More
Extra over item No.20.3.1 for providing additional bulb in under reamed piles,under specified dia meter 300mm(Only the quantity of extra bulbs area to be paid) as per DSr.No.20.4.1
94
147335
1567.4
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
6522.4
423956
65
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
391.85
2409877
6150
... More
Fixing of door,windows and ventilator frames in position in building including proper adjustment required for proper completion of the work
-
-
-
... More
Doors
66
5306
80.4
... More
Windows
62
3986
64.3
... More
Ventilators
28
1075
38.4
... More
Supply and fixing of 35 mm thick single leaf Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per S.I.No.470(a).
99.75
179550
1800
... More
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR-9.62.1
14
1958
139.9
... More
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.62.2
52
6630
127.5
... More
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.63.1
132
6507
49.3
... More
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 200mm long with necessary screws etc.completenas per DSR-9.63.2
132
5742
43.5
... More
Providing and fixing ISI marked oxidised M.S.door handles 150 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1
264
7154
27.1
... More
Providing and fixing glass panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes as DSR-10.30.1
100.53
73470
730.83
... More
Provding and fixing of glass strips 4 mm thick and 25 mm wide in joints of terrazo/cement concret floor as per DSR-11.13
793.96
26835
33.8
... More
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
17.64
4321
245
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
1802.46
270369
150
... More
15 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over rough surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.2.2
1298.62
231414
178.2
... More
Engraving lines in the plaster of outer face wall vertically and horizontally to display th esurface as stone facing as directed by the E/I including all labour and T&P etc.required for proper completion of the work. Add for extra labour to all item of plaster as S.I.No 598
775.27
29460
38
... More
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
74.2
24115
325
... More
40 mm(1½") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.605.
18.69
9345
500
... More
Udaipur green marble stone flooring with 18 mm thick marble stone ,as per sample of marble approved by Engineer-in-charge, over 20 mm(average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete as per DSR-11.23.5
15.67
30949
1975.1
... More
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm thick base of cement morter 1:4(1cement : 4 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per DSR-11.26.1
113.4
187824
1656.3
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture),of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-chage,in skirting,risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per DSR-11.36/8.31
230.11
238647
1037.1
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x450mm or more (thickness to be specified by the manufacture),of 1st quality conforming to IS:15622 of approved makein all colours,shades exceptwhite,ivory,Grey,Fume red Brown laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement matching pigments etc. complete as per DSR-11.40
66.1
62299
942.5
... More
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per DSR.No.11.41.2
436.38
529983
1214.5
... More
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) i jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoint with white cement & matching pigments etc. complete as per DSR.No.11.46.2
73.43
88373
1203.5
... More
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
112
41182
367.7
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.46.1.
1422.16
140793
99
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
3528.49
349320
99
... More
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
365.14
40895
112
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (1st quality (Royal,Silk) Asian/Berger) as per DSR.No.13.60.1
2165.93
229588
106
... More
Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc.,by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.This layer will be allowed to air cure for 4 hours.(b) Second layer of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm.This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface,treatment and sealing of all joints,corners,junctions of pipes and masonary with polymer mixed slurry as per DSR-22.5
116.15
30744
264.7
... More
Providing and laying of "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compond spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba morter mixed with water proofing compound in 1:4 cement and coarse sand morter finished smooth & top mashed false square 30 cm x30 cm and side wall parapet shall be monolythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2.00% by weight & including supply of all materials,labour T & P etc.required for proper completion of the work.
139.77
146758
1050
... More
Providing and laying of light cinder filling under floor of Toilets & other sunken roofs.
-
-
-
... More
S/F of hexagonal fan box with hexagonal side of approx 80 mm in lenth fadricated from 16 SWG M.S.sheet incorporating 10 mm dia M.S.round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all materials,labour and T&P etc.for proper completion of work as per SI.No 1149.
48
7200
150
... More
Vivechna Room
-
-
-
... More
Clearing jungle including up rooting of trunk vegetation grass bush wood trees and sapling of girth upto 30cm.Measured at a height of 1meter above ground level and removal of rubbish upto a distance of 50m.outside the periphery of area cleared as per SI.No.259
110
660
6
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
74.83
9353
125
... More
Providing and injecting chemical emulsion for preconstruction antitermite treatment and creating and barrier under and around the columns pits,wall trenche basement excavation top surface if plinth filling junction of wall and floor,along the external permeter of binding expansion joints,surrounding of pipes and conduit etc.complete (plinth area of the building at ground floor only shall be as per I.S.6313 (part II 1981) Aldrine emulsiable concentrate or any other approved material such as Hepthachlor or Chlordane will be used.The rate of application of chemical emulsion shall be as follows:-
-
-
-
... More
(1) Treatment for masonry and foundation 5 litres per sq.M.
-
-
-
... More
(2) Back fill in immediate contact with foundation 7.50 litres per sq.M.
-
-
-
... More
(3) Treatment of top surface of plinth filling 5 litres per sq.M.
-
-
-
... More
(4) Treatment of soil along external perimeter of building 7.50 litres per sq.M.
-
-
-
... More
(5) Treatment of soil under apron along external perimeter 5 litres per sq.M.
60.28
10850
180
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
15.14
119606
7900
... More
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
105.19
20796
197.7
... More
Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255
7.99
6471
810
... More
Cost cement concrete door sills chaukhats,boundary post,shalves and similar work with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:2:4 excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.282
0.5
4800
9600
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
5.76
59116
10263.3
... More
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
8.5
90638
10663.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lighter beams i.e.having span upto 6.00m excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.285(b).
3.52
37710
10713.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.287.
1.18
11402
9663.3
... More
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
0.7
7490
10700
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
38.93
229687
5900
... More
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
26.77
166509
6220
... More
M-150 class brick work in 1:4 cement and coarse sand 2.25 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(b),309 & 310(a)
7.57
46631
6160
... More
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
666.45
43319
65
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
21.56
132594
6150
... More
Fixing of door,windows and ventilator frames in position in building including proper adjustment required for proper completion of the work
-
-
-
... More
Doors
10
804
80.4
... More
Windows
4
257
64.3
... More
Ventilators
4
153
38.4
... More
Supply and fixing of 35 mm thick single leaf Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per S.I.No.470(a).
17.01
30618
1800
... More
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR-9.62.1
4
559
139.9
... More
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.62.2
6
765
127.5
... More
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.63.1
8
394
49.3
... More
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 200mm long with necessary screws etc.completenas per DSR-9.63.2
12
522
43.5
... More
Providing and fixing ISI marked oxidised M.S.door handles 150 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1
20
542
27.1
... More
Providing and fixing glass panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes as DSR-10.30.1
7.11
5196
730.83
... More
Provding and fixing of glass strips 4 mm thick and 25 mm wide in joints of terrazo/cement concret floor as per DSR-11.13
89.91
3038
33.8
... More
12 mm thick plaster with cement and coarse sand in 1:3 with water proofing compound including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.583.
67.95
15642
230.2
... More
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
21.29
5216
245
... More
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
190.93
28639
150
... More
15 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over rough surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.2.2
168.7
30062
178.2
... More
Engraving lines in the plaster of outer face wall vertically and horizontally to display th esurface as stone facing as directed by the E/I including all labour and T&P etc.required for proper completion of the work. Add for extra labour to all item of plaster as S.I.No 598
89.91
3416
38
... More
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
44.64
14508
325
... More
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm thick base of cement morter 1:4(1cement : 4 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per DSR-11.26.1
20.15
33374
1656.3
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture),of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-chage,in skirting,risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per DSR-11.36/8.31
29.03
30107
1037.1
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x450mm or more (thickness to be specified by the manufacture),of 1st quality conforming to IS:15622 of approved makein all colours,shades exceptwhite,ivory,Grey,Fume red Brown laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement matching pigments etc. complete as per DSR-11.40
6.78
6390
942.5
... More
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per DSR.No.11.41.2
32.74
39762
1214.5
... More
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) i jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoint with white cement & matching pigments etc. complete as per DSR.No.11.46.2
7.9
9507
1203.5
... More
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
16
5883
367.7
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.46.1.
206.16
20409
99
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
449.99
44549
99
... More
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
74.68
8364
112
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (1st quality (Royal,Silk) Asian/Berger) as per DSR.No.13.60.1
243.83
25845
106
... More
Providing and laying of "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compond spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba morter mixed with water proofing compound in 1:4 cement and coarse sand morter finished smooth & top mashed false square 30 cm x30 cm and side wall parapet shall be monolythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2.00% by weight & including supply of all materials,labour T & P etc.required for proper completion of the work.
55.65
58432
1050
... More
S/F of hexagonal fan box with hexagonal side of approx 80 mm in lenth fadricated from 16 SWG M.S.sheet incorporating 10 mm dia M.S.round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all materials,labour and T&P etc.for proper completion of work as per SI.No 1149.
6
900
150
... More
Septic Tank and Soakpit
-
-
-
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
70.22
8777
125
... More
Add extra to above SI No.251 for every additional lift 1.50 m or every additional lead 50m as per SI No.254
21.08
421
20
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
4.38
34602
7900
... More
Providing and laying in cement concrete 4:2:1 of not less than stength of M-150 stone ballast(20mm nominal size)2 approved coarse sand:1 cement and curing complete including cost of form work in foundation and floors as per SI No.279(b).
0.78
7098
9100
... More
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
5.04
29736
5900
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
14.9
89400
6000
... More
12 mm thick plaster with cement and coarse sand in 1:3 with water proofing compound including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.583.
49.92
11491
230.2
... More
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
2.54
27084
10663.3
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
2
12300
6150
... More
Supply and laying of 40 mm gauge over burnt brick ballast including all materials,labour and T&P etc.for proper completion of the work.
1.34
1956
1460
... More
Providing M.S.foot rest including fixing with 20 x20x10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design with 20x20 mm sq.bars.
8
2147
268.45
... More
Providing and fixing 75 mm dia soil waste and vent pipes as per DSR-17.35.2.1
3.6
2907
807.6
... More
Supply and fixing of 450x450 mm rectanglar C.I.Cover without frame (light duty) the weight of the cover not less than 11.00 kg
4
4280
1070
... More
Water Supply and Sanitary works
-
-
-
... More
Making khurars 45x45 cm with average minimum thickness of 5 cm cement concret 1 :2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.sheet 1 mx1 mx400 micron,finished with 12 mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement,rounding the edges and making and finishing the outlet complet as per DSR-12.22
10
2329
232.9
... More
Providing and fixing White Viterous china Orissa patern W.C.pan of size 580 x 440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C.flushing cistern,including flush pipe,with manually controlled device (handle lever) conformin to IS:7231,with all fittings and floors complete,including cutting and making good the walls and floors wherever required as per DSR.No.17.1.1
16
65288
4080.5
... More
Providing and fixing white viterous W.C.pan with ISI marked white soilid plastic seat and lid china pedestal type water closet (europen type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flusing cistem with flush pipe with fittings &C.I/M.S Brakets ,40mm fluse bend , overflow arrangment with special of standard make and mosqiito proof coupling of approved muncipal design complete including painting of fitting and brackets , cutting and making good the walls and floors where ever required .Confirming to IS : 7231, Parryware, /Hindware/ Seabird/Orient(Coral)
-
-
-
... More
Providing and fixing White vitreous China flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap with C.I.brackets,15mm C.P.brass pillar taps.32mm C.P.brass waste of standard pattern,including painting of fitting and brackets,cutting and making good the walls wherever require.White Viterous China flat back wash basin size 550x400mm with single 15mm C.P.brass pillar tap as per DSR.No.17.7.4
8
20063
2507.9
... More
Providing and fixing Stainless steel kitchen sink 610mmx460 mm bowl depth 200 mm first quality with C.I.brackets and stainless steel plug 40 mm,icluding painting of fittings and brackets,cutting and making good the walls wherever required as per DSR-17.10.2.2
-
-
-
... More
Providing and fixing P.V.C.waste pipe 32 mm for sink or wash basin including P.V.C.waste fittings complete as per 17.28.1.1
8
440
55
... More
Providing & fixing 100 mm dia C.P.grating in place of C.I.grating over floor trapes.
24
1835
76.46
... More
Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete as per DSR-17.31
8
8637
1079.7
... More
Providing and fixing 110 mm dia P.V.C pipe as per IS:1729 soil,waste and vent pipes:
240
57600
240
... More
Providing and fixing 75 mm dia soil waste and vent pipes as per DSR-17.35.2.1
160
129216
807.6
... More
Providing and fixing 75 mm dia terminal guard as per DSR-17.56.1.1
8
2112
264
... More
Providing and fixing trap of self cleaninsing design with screwed down or hinged grating with or without vent arm complete,including cost of cutting and making good walls and floors:
8
7365
920.7
... More
Providing and fixing 850 x 20 mm C.P.brass towel rail complete with C.P.brass brackets fixed to wooden cleats with C.P.brass screw as per DSR-17.73.2
8
4400
550
... More
Provding and fixing of 15 mm dia nominal bore G.I.pipes complete with G.I.fittings & clamps including cutting & making good the walls etc.Exposed on wall as per DSR.No.18.10.1
240
47548
198.12
... More
Provding and fixing of 25 mm dia nominal bore G.I.pipes complete with G.I.fittings & clamps including cutting & making good the walls etc.Exposed on wall as per DSR.No.18.10.3
160
45072
281.7
... More
Providing and fixing 15 mm dia nominal bore brass bib cock of approved quality as per DSR-18.15.1
8
2032
254
... More
Providing and fixing 15 mm nominal bore brass stop cock of approved quality
8
2024
253
... More
Providing and fixing gun metal gate valve 25 mm dia with wheel of approved quality
8
8160
1020
... More
Provding and fixing of 15 mm dia nominal bore 450mm long uplasticised PVC connection pipe with brass unions as per 18.21.2.1
24
1800
75
... More
Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet 100 mm diameter as per DSR-18.22.1
8
3600
450
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but without fittings and base support for tank
16000
144000
9
... More
Providing and fixing CP brass long body 15 mm nominal bore dia bib cock of approved quality conforming to IS standards and weighting not less than 690gms.
8
4704
588
... More
Providing and fixing CP brass angle valve 15 mm dia for basin mixer and gyser points of approved quality conforming to IS 8931.
24
11352
473
... More
Providing & fixing 125 mm nominal dia circular type with 25 mm waste hole grating of approved quality and colour as per DSR-18.58.1.2
8
680
85
... More
Providing,laying and jointing 100 mm dia glazed stoneware pipes class SP-1 with stiff mixure of cement mortar in the proportion of 1:1 (1 cement : fine sand) including testing of joints etc.complete.
80
22344
279.3
... More
Providing and laying cement concrete 1:5:10(1 cement :5 fine sand:10 graded brick aggregate 40 mm nominal size) all -round 100 mm dia S.W.pipes including bed concrete as per standard design as per DSR-19.2.1
80
82140
1026.75
... More
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
Inside size 750x750x750 mm dimensions
2
18510
9255.1
... More
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
Inside size 900x900x900 mm dimensions
2
14993
7496.5
... More
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
Inside size 600x600x600 mm dimensions
3
11816
3938.8
... More
Electrcal works
-
-
-
... More
SUB HEAD I - INTERNAL WIRING
-
-
-
... More
Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects as per SI.No.138(c).
163
99430
610
... More
Wiring points for two ways light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe concealed in wall and partly laid in slab along with the reinforcement before concreting ,complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects as per SI.No.139(c).
8
6328
791
... More
Same as item No.(1) but for fan and light duty exhaust fan as per SI.No.140(c).
52
34892
671
... More
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc as per SI.No.141(c).
54
17658
327
... More
Same as item No.(1) but for Exhaust fan point using 1.5 sq.mm FR PVC insulated wireh as per SI.No.144(c).
20
17860
893
... More
Add for light /fan points with modular type switch in place of piano type switch. as per SI.No.187(A)
215
9460
44
... More
Add for two way light points with modular type switch in place of piano type switch as per SI.No.187(B).
8
1320
165
... More
Add for plug points with modular type switch in place of piano type switch as per SI.No.187(C)
54
4482
83
... More
Supply and wiring of submain 2 number 1.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.1313(C)
980
102900
105
... More
Supply and wiring of submain 2 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.1307(c).
647
78287
121
... More
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. as per SI.No.221(c).
426
63474
149
... More
Supply and wiring of submain 4 number 16 sqmm . PVC insulated 1100 V grade single core copper conductor cable in heavy duty 40 mm dia PVC conduit concealed in wall along with two number 10 sqmm single core copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.274(c).
128
93440
730
... More
SUB HEAD II - INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects as per SI.No.1120..
52
7280
140
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects as per SI.No.1120..
20
3900
195
... More
Supply and fixing of LED Tube light with batten suitable for up to 1 x 22 watt LED Tube light fitting including tube on surface complete in all respect. CAT-AAA as per SI.No.1413
40
47600
1190
... More
Supply & fixing of 12 watt LED Bulb, 1-Star rating, suitable for Batten/ Angle holder including making connection. Complete in all respect.
123
17613
143.2
... More
Supply and erection of BEE 5 star 1200 mm sweep ceiling fan with fan motor of A.C.Permanent insulation,capacitor rating conforming BEE 5 Star rating and IS:374/79mand also comply with IS:1709/1984 with latest amendment.The rated voltage 220/240 volts,50 Hz,1-ph AC the fan assemble should consists of down rod blades,shackle canopies etc and with double ball bearing system as per SI.No.1501(i).
52
93600
1800
... More
Supply and erection of 300 mm sweep AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
20
29492
1474.6
... More
SUB HEAD III - DISTIBUTION BOARD
-
-
-
... More
Construction of recess 600x480x200 mm. size distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work as per SI.No.1141(B).
12
7800
650
... More
Supply and fixing of factory fabricated 600x480x200 mm. size M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work as per SI.No.1147
12
20640
1720
... More
Supply and fixing of 6 Way TPN flush/surface mounting distribution boards complete in all respects as per SI.No.1027(A) CAT B.
12
39000
3250
... More
Supply and fixing of 5 - 32 amps. flush/surface mounting distribution boards complete in all respects as per SI.No.1002 CAT A.
88
22880
260
... More
Supply fixing and making of 40 Amp. 4 Pole MCB connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.
12
20640
1720
... More
Supply and fixing of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal magnetic release as per SI.No.1021(A).
6
37800
6300
... More
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. as per SI.No.1139
48
16320
340
... More
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. as per SI.No.1031(A).
9
31050
3450
... More
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects as per SI.No.1034(b)
8
200
25
... More
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With neutral link and earth terminal. complete in all respects as per direction and satisfaction of engineer-in-charge as per SI.No.1033 CAT A.
8
6800
850
... More
SUB HEAD IV - EARTHING
-
-
-
... More
Supply and burring of safe earthing electrode T-39 (Hot-Dip Galvanized), length up to 3000 mm, outer pipe 76 mm inner dia 38 mm terminal dia 12 mm , outer G.I. pipe of 16 SWG and inner G.I. pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture pf retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board, cost of 25x3 G.I. Strip will be extra) as per SI.No.725(d)
4
50800
12700
... More
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects as per SI.No.716.
20
1800
90
... More
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects as per SI.No.723.
40
8400
210
... More
SUB HEAD V - L.T PANELS
-
-
-
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel base with bottom and top cable entreis Electrical control panel with TPN MCCB's ( Foue pole 36 KA with thermal magnatic release) switches complete and instrument chamber shall be seperate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F.,KW etc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS: 8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC supports with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable and boxes, compression glands and indicating lamp on incoming etc as per SI.No.812 (C)
-
-
-
... More
Incoming
-
-
-
... More
200 Amp. MCCB-1 No.
-
-
-
... More
Outgoing
-
-
-
... More
Phase indication lamp on each outgoing to be provided
-
-
-
... More
100 Amps MCCB -1No
-
-
-
... More
63 Amps MCB -3No
-
-
-
... More
63 Amps MCCB -1No Spare
1
138070
138070
... More
SUB HEAD-VI UNDER GROUND CABLES
-
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by Engineer-in-charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc as per SI.No 501(a)
80
22080
276
... More
As in above Item no.(1) but 35 sq.mm 3-1/2 core as per SI.No.501(k)
50
21100
422
... More
As in above Item no.(1) but 95 sq.mm 3-1/2 core as per SI.No.501(n).
75
52500
700
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connecteced with the earth as per direction of Engineer-in-charge as per SI.No.503(a)
-
-
-
... More
95 sq.mm 3-1/2 core
4
304
76
... More
SSupply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of Engineer-in-charge as per SI.No.504(g)
4
192
48
... More
As in above item no.( 4 ) but 95 sq.mm as per SI.No.504(i)
12
1056
88
... More
CONSTRUCTION OF C.C.ROAD
-
-
-
... More
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
6.02
752
125
... More
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
25.07
4956
197.7
... More
Providing and laying in cement concrete 4:2:1 of not less than stength of M-150 stone ballast(20mm nominal size)2 approved coarse sand:1 cement and curing complete including cost of form work in foundation and floors as per SI No.279(b).
15.04
136864
9100
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
11.53
91087
7900
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
3.54
21240
6000
... More
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
15.38
2137
139
... More
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
15.38
4998
325
... More
Providing and laying of 125 micron thick Polythene sheet under C.C.Road as per direction of engineer in charge.
100.29
4011
40
... More
Making Contraction joint / Expension Joints in C.C.Road with 0.80kg bitumen and 0.0025 cum coarse sand including supply of all materials,labour and T&P for proper completion of the work as per direction of engineer in charge.
30
1155
38.5
... More
S/F of Informatory sign board 90x120 cm.size & 3.00 meter long made with angle iron 40x40x5 mm. 18 gauge MS sheet and braud with flat iron 35x5 including two coat painting with red oxide cartage upto stone complete with all laboursmaterial and T&P as per standard design and drawing supplied by department
1
5600
5600
... More
SCHEDULE OF QUANTITIES FOR FOR FIRE FIGHTING SYSTEM(INTERNAL)
-
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. As PWD Electrical Shedule-2018, Sl-1131
8
62880
7860
... More
Supply and fixing of Co₂ Type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. As PWD Electrical Shedule-2018, Sl-1132
16
191680
11980
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9- 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. As PWD Electrical Shedule-2018, Sl-1133
20
9800
490
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements