Rural Engineering Department Tender

12 mm thick plaster in 1:4 proportion with cement mortar consisting of one part cement and 3 part app. Fine sand of 1.25 minimum thickness not be less than 10 mm inc. supply of all materials,labour and T&P etc. req. for proper completion of the work . SI-584

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:2:4 in R.C.C. beam and lintal.As per S.I.No.283

Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work.As per S.I.No.504.

Earthwork in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50m in depth etc.As pei S.I.No.253.

Construction of granular sub base by providing well graded material , spreading in uniform layers with moter graded on prepared surface ,mixing by mix in place method with rotavator atOMC, and compacting with smooth roller to achived the desired density, complete as per T.S.C. 401

Providing laying spreading and compacting stone aggregates of 53mm to 22.40mm sizes (Crusher broken) to water bound macadam (WBM III) specification including spreading in uniform thickness hand packing-rolling with smooth wheele roller 80-100 KN in stages to proper grade and camber applying and brooming stone Screeding to fill-up the interstices of course aggregtate watering and compacting to the required density grading 3 as per Technical Specification clause 405.(WBM III)

Construction of un-reinforcement and expension joint construction joint only pcc pavement thickness as per design over aprepsred sub base with 43 grade cement or any other type as cluase 1501.2.2 m-30 grade coarse and fine aggregate coferming to IS383 maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.20 Cum. capicity and appropiate weigh batcher using approved mix design laid in approved fixed side from work and fixing of 125 micon polythine film. including the levelling from work as per drawing spreading the concrete with showel,racks,compacting using needle , screed and plate vibrators and finishing in continous oparation including provision of contraction and expension and expension joints applying primer and curing compound and water finishing to lines and grade as per drawing and technical specification clause 1501.

Supply and fixing of informatory Sign board including its painting, Lettering including supply of all materials,labour T&P etc. required for proper completion of the work.