Rural Engineering Department Tender

Construction of un-reinforce,and Expansion joint construction joints only pcc pavement thickness as per design over a prepared subbase, with 43 grade cement or any other type as clause 1501.2.2 m-30 grade coarse and fine aggregate confirming to is 383 maximum size of coarse aggregate not exeding 25 mm mixed in a concrete mixer of not less than 0.20 cum capacity and appropriate weigh batcher using approved mix design laid in approved fixed side formwork and fixing of 125 micron polytheen film including the levelling the formwork as per drawing spreading the concrete with shovel, rakes, compacting using needle, screed and plate vibraters and finished in continious operation including provision of contraction and expansion joints applying primer and curing compound and water finishing to lines and grade as per drawing and technical specification clause 1501.

Cement, concrete with 1:4:8 cement, coarse sand and approved 40 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work.as per Item No New Item of CH. 5 S.I. 281

RCR masonary work in 1:4 in foundation and plinth i/c supply of material as order by the Engineer-in-charge ,labour,T&P etc. required for completion of work as Ch.8 Item no additional 23

Cement, concrete with 1:2:4 cement, coarse sand and approved 20 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work.as per Item No New Item of CH. 5

12 mm. thick plaster with 1:4 cement and fine sand of 1.25 F.M. mortar including supply of all materials, labours and T&P etc. required for proper completion of the work .