Rampur Development Authority Tender

Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 meter (20") depth and earth work in embankment to be in 20 cm. (8") layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M (5ft.) lifts and 0 Km lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 5 Km distance as directed Egineer-in- charge. UPPWD SI. No. 253(a) /2020

Same as item 3 but in mechanically compacted 95% proctor's density. SI. No. 253B SOR

M-150 brick work in 1:4 (One part of cement and Four part of coarse sand of 2.75 F.M.) cement mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (SI. No. 307A) SOR 2020

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Slab windows and sunshades excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. .UPPWD (SI. No. 287) SOR 2020

Mild Steel (Tor steel of plain) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel and its wastage, bend hooks and authorised overlapping shall be measured UPPWD (SI. No. 504) SOR 2020 B/F Qty. Item No. 4 (110.00X1.25X78.50/100) = 107.93

Concrete with 2 cm. guage approved stone ballast, coarse sand and cement in proportion of 1:2:4 including of all material, labour, T&P etc. required for proper completion of the work. SI. No. 282 SOR 2020

12 mm thick plaster with 1:4 (one part cement and Four parts of Fine sand of 1.25 F.M.) over brick work minimum thickness not to be less than 1 cms. Including supply of material, labour, T&P etc. required for proper completion of the work. UPPWD (SI. No. 584) SOR 2020

Providing wall putty on New surface with approval quality materila of Berger/JK/Birla or similar make 2 coats. New item No. 11 page no. 43 / 2020

Finishing wall with superior quality water proof cement paint / snowcem of approved make and quality on new work with two coats to give even shade including preparing surface bt the thorughly cleaning and sand preparing ans supply of all materilas, labour, Tools & plant etc. required for proper completion of the work. SI No. 660, 661 Page No. 42 /SOR 2020

Mild Steel or iron work of small sizes and section such as holding down bolts, hold fast, tie rods, grating etc. wrought to required from including supply of stel bolts, nuts wastage etc. and their fixing required for proper completion of he work. UPPWD (SI. No. 502) SOR 2020 144 Sqm @ 27 KG Per Sqm = 3888.00

Supply and laying of 60 mm thick I shapped mechanically compressed inter locking cement pavers block manufactured by high pressure & controlled vibreation maching having plan dimension 200 x (160+120mm) with minimum 5 mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strenght of concrete paver blocks shall not be less than 30 MPa and 4.50 kg per number including cost all materils labour T&P etc. required for proper completion of work as directed by Engineer-in-charge. (As per PWD SOR 2020)

Supply and Providing Swan boat (4 Seater) all Complete Item as per direction Engineer Incharge

Supply and Fixing Fountain all Complete Item as per direction Engineer Incharge

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 2015 (19.7.1.1)

Supply and Laying Grass all Complete Item as per direction Engineer Incharge

Laying of 25 mm thick Kota Stone of size 45x45 cm and above florring over prevously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the diretion of Engineer in charge cutting polishing with wax polish including supply of all materiaals labour and T&P etc reqired for proper completion of the work. SI New Item No. 2 page no. 40 SOR 2020

Painting two coats over one priming coat on wood or steel and other metal etc. surface with superior synthetic enamel paint of standarad make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter, sand papering and stripping including cost of all materilas, labour T&P etc. required for proper completion of work. (SI. No. New item No. 2+5 ) Page No. 42, 43 SOR 2020

Boring complete work as per Analysis

Supply and Providing bolder 5 Kg - 20 Kg all complete item as per direction Engneer Incharge as per Analysis (42.00+41.00 / 2)X (65.00+69.00 / 2)= 2780.50 Sqm Area X Depth = 2780.50 X 0.20 = 556.10

Supply of Coarse Sand all complete item as per direction Engneer Incharge as per Analysis (42.00+41.00 / 2)X (65.00+69.00 / 2)= 2780.50 Sqm Area X Depth = 2780.50 X 0.08 = 222.44 Cum

S/F RCC Bench B-54 Complete Item as per direction in Engineer in charges as per Market Rat

Electrical Work Supply and laying of 7 Mtr GI Octagonal pole of approved make (top dia 70 mm, Bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single arm bracket ( 1 Mtr length) on RCC foundation including the cost of foundation, Foundation bolts, excavation & back filling and required T&P complete in all respect. SI. No. 641 SOR

Supply and laying of aluminum conductor P.V.C. insulated armored served sheathed cable 1100 volts 25 core Havells. As directions of Engineer In charge complete all respect (with 05 years waranty) SI. No. 501(1)/124 SOR

Supply and Fixing of LED Street Light fittting having die cast aluminium body and dissuser with driver set suitable for 70 to 90 Watt. Confitiming to IP 66 Protection complete in all respect CAT AAA SI. No. 1424 SOR

Supply and Fixing of PVC pipe 40 mm dia 8 kg/cm2 P.V.C. heavy duty Surya / Appolo/ Kissan or Equalvalent cat. ISI / ISO mark. As per Market Rate

Supply and Wiring of submains with two nos. of 2.5 sqm FRLSH P.V.C. insulated 1100 V grade single core multi strand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as direction bv Engineer Incharge. S.I. 289/96 SOR

Supply and Fixing 3 HP mono block pump all fitting as Engineer Incharge. Market Rate