Rampur Development Authority Tender

M-150 brick work in 1:4 (One part of cement and Four part of coarse sand of 2.75 F.M.) cement mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (SI. No. 307A) SOR 2017

Concrete with 2 cm. guage approved stone ballast, coarse sand and cement in proportion of 1:2:4 including of all material, labour, T&P etc. required for proper completion of the work. SI. No. 282 SOR 2016

2.5 cm thick damp proof coarse and approved coarse 1:2 with and including water proofing material cement concrete consisiting of one part cement 11/2 parts approved coarse sand and 3 parts approved 13 mm graded stone grit and including water proofing materilas as ordered by th Engineer-Charge in the prorpostion as spaciifed by te manufacturer. SI No. 360, 360(A) SOR 2017

Painting of D.P.C. with two coat of air blown bitumen 80/50 or 85/25 @ about 1.7 Kg/ Sqm including cost of fuel if any New item No. 1, SOR 2018 Same as item no. 4

Same as above item No. 3 but in super structure in 1:4 cement & coarse sand etc (SI. No. 307A+310) SOR2017

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Lintel excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. (SI. No. 283) SOR 2017

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Slab excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. (SI. No. 283) SOR 2017

Mild Steel (Tor steel of plain) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel and its wastage, bend hooks and authorised overlapping shall be measured (SI. No. 504) SOR 2017

Mild Steel or iron work of small sizes and section such as holding down bolts, hold fast, tie rods, grating etc. wrought to required from including supply of stel bolts, nuts wastage etc. and their fixing required for proper completion of he work. (SI. No. 502) SOR 2017

Scrapping old white or color wash indusing disposal of refuse with in a distance of 60 m. SI. No. 708 SOR/2017

12 mm thick plaster with 1:4 (one part cement and Four parts of Fine sand of 1.25 F.M.) over brick work minimum thickness not to be less than 1 cms. Including supply of material, labour, T&P etc. required for proper completion of the work. (SI. No. 584A) SOR 2017

S/F 6 mm thick china glazed tiles of first quality in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with ehite cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. SI. No. 628. SOR 2017

S/F 6 to 8 mm thick ivory or light shades vitrefied tiles 600 x 600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished within its cement colour slurry, jointing and polished of approved quality complete including supply of all materials labour tools and plants etc required for proper completion of the work, as per direction Engineer in charge SI. No. New Item 5/ 2017

Providing wall putty on New surface with approval quality materila of Berger/JK/Birla or similar make 2 coats. New item No. 11 page no. 39

Painting two coats over one priming coat on wood or steel and other metal etc. surface with superior synthetic enamel paint of standarad make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter, sand papering and stripping including cost of all materilas, labour T&P etc. required for proper completion of work. (SI. No. New item No.1 +2+7 ) Page No. 33 SOR 2017

Distempering Two coat with oil bound distemper of approved brand and manufacture and required shade on and undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British, Shalimar asian paint after throughtly brushing the surface free from including preparing the surface even and sand prepared smooth including cost of all materials.(SI No. 649 + 650) SOR/2017

Supply and laying of 60 mm thick I shapped mechanically compressed inter locking cement pavers block manufactured by high pressure & controlled vibreation maching having plan dimension 200 x (160+120mm) with minimum 5 mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strenght of concrete paver blocks shall not be less than 30 MPa and 4.50 kg per number including cost all materils labour T&P etc. required for proper completion of work as directed by Engineer-in-charge. As per Analysis Rate 2019

Providing and fixing thick door shutter made of solid PVC foam profile with homegenous fine cellular structure having smooth outer integral skin having 71mm width & 28 mm thick as vertical & horizontal styles, joints are made using solvent adhesive and GI'C sections (39mm x 19mm x O.6 mm thick) or MS pie (40mm x 20 mm) stifener frame insert & telescopic polymeric 'L' corners. The panel shall be filled with 3 mm thick high pressure compact laminate as per manufacture's specifications and directions of the Engineer in charge cover moulding shall be provided for covering fixing screws and elegant look ( For W.C. bathroom door shutter). New item No. 9.124 /2017

Water Work

Providing and fiing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or Strap, 10 litre low levelwhite P.V.C. flusing cistern with manually conrolled device (Handle lever) conforming to IS. 7231, with fittings and fi SI. No. 17.1.1 SOR 2017

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore SOR 18.52.1 / 2017

Providing and Fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work-Exposed on wall. 15 mm dia nomianl bore. SOR SI. No. 18.10.1 / 2017

Providing and fixing C.P. brass bib cock of approved quality conforming 15 mm nominal bore etc.to IS:8931 : DSR 18.49.1 / 2017

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 2017 (19.7.1.1)

S/F 100 mm dia PVC pipe, 6 kg / per sqm etc. SI. No. 730A/2019

S/F 500 Litr. PVC water tank i/c stop coak necessary fittings complete in all respect with materisl & labour as per direction of as per MR.

Providing and Fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. New item No. 9.96.1 SOR 2017 (300X16 mm)

Providing and Fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. New item No. 9.100.1 SOR 2017. (125 mm)

Supply and Fixing Outdoor GIM Elliptical Trainer all fitting etc. As per MR 2019

Supply and Fixing Outdoor GIM Rower all fitting etc. As per MR 2019