Rajya Krishi Utpadan Mandi Parishad Tender

Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel painted with anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect.

Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 Sq mm 4 Core

Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. (a) 16 Sq mm

Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. Cat.AAA

Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entries Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magneticrelease) Switches Complete and instrument chamber etc. Complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F,KWetc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted onnon-hygroscopic supports such as CMC/BMC support with detachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grouting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 100 Amp. MCCB-1 Nos. Outgoing 63 Amp.MCCB-1 No. and 32 Amp.MCCB 2 Nos.

S/L of B class Medium duty 50 mm Dia GI Pipe on pole or in road crossing complete in all respects

Supply of 150 Liter capacity Water Coolar of Usha make with Refrigarator R-22 Model No. (SAR 150150G, SS304) havying cooling capacity 150 Liter with extra large stainless steel body with water tap 2 Nos complete in all respects. (app.)

Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects. (app.)

Installation and Comissioning charges of Water Coolar incl. connection complete in all respects.

Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concrete base and brick work in 1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis)

S/F of Chlorinated Polyvinyl Chloride CPVC Pipes of 15mm dia cpvc Pipe for Water Coolar Fittings, clamps including all materials, Labour etc complete in all respects.

S/F of Chlorinated Polyvinyl Chloride CPVC Pipes wash out pipe of 40mm dia cpvc Pipe for wastage water drain from Water Coolar connection complete in all respects.

S/F of brass stop cock of approved make complete in all respects.

S/F of brass bib cock of approved make complete in all respects.

S/F of uplasticised PVC connection pipe with brass unions 30cm length 15mm dia Pipe Fittings including all materials, Labour etc complete in all respects.

S/burying of 40 mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I., wire and pipe/will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonry enclosure, funnel at top, alternate layers of charcol . coke and salt at least 150 mm thick al around etc. as per directions of Engineer-in-charge complete in all respects as per drawing. (701)

S/fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T & P required for proper completion of the work as directed at site.

S/fixing of power plug with 15A/250 V flush type modular switch and 5 pin 15A/250 V flush type universal socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects

S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat A

S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat A

S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B

S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 10sqmm 2 core (20C.1.2)

Supply and Hoisting of syntax or equivalent Make High Density Polyethylene sheenless moulded Tank and placing in position. The job is inclusive of all taxes, Labour, T&P and other material for proper completion of work as directed by Engineer in charge at site.

Supply and fixing of 100 mm x 110 mm hackle insulator / 100 x 80 mm pin insulator including G.I. bolts spindle nuts etc. complete in all respects.

S/E of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respects.

Tightening of overhead line ACSR Conductor complete in all respect.

S/E of G.I. Wire on poles/service bracket including binding etc. complete in all respects.

Supply and erection of stay set at least 3.5 Meters away from the pole complete with galvanized 19 mm dia x 1.80 Meter long stay rod, 30cm x 30 cm x 6.3mm anchor plate, thimble stay clamps, stay insulator 19mmx600mm double screw tightener , 7/3.15mm G.I. stay wire etc. in 1:3:6: cement concrete in all respects.

Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects.

S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 10sqmm 2 core

Supply & fixing of LED street light fitting with mandatory driver set having die cast Aluminium body and lenses suitable for 110Watt to 130 Watt and diffuser/ reflecto with driver set suitable for 110 to 130 watt. Confiming to IP 66 Protection having company LOGO Engraved complete in all respects. including Labour.(i) Cat-AAA 12100-14300 system lumens High Power with lenses,110lm/W,PP0.95,THD10%,at full load,CR170, Potted driver set Not Circuitory Phase to phase protection at 440V and 300V auto cut and restart feature with 5 year warrantee. Cat-AAA