Rajya Krishi Utpadan Mandi Parishad Tender

Wiring point for call bell with 1 sq. mm. FRLSH PVC Insulated multistrand single core copper conductor cable in heavy guagePVC conduit pipe partly concealed in the wall. complete withmultistrand 1.5 sq mm. FRLSH PVC insutated single copper conductor as earth continuity wire and modular type bell push or two pin socket etc. complete in all respect as directed including matching colour wash.

S/F of surface/flush mounting 8 ways SPN distribution board withadditional metal door without MCB complete in all respect and as directed at site Cat-A

Supply/fixing of 63 Amp. DP MCB (10 K.A.) C-Curve Cat-A

Supply/fixing of 5-32 Amp. MCB (10 K.A.) C-Curve Cat-A

Supply and fixing of power plug with 20A/240 V flush type modular switch and 5 pin 20 A/250 V flush type universal modular socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects.

Supply and wiring of submain with two number 4 sq. mm FRLS PVC insulated 1100 V multistrand single core copper conductor cable in 20 mm dia. heavy gauge PVC conduit concealed in wall complete with 1 number2.5 sq mm. FRLSH PVC insutatedmultistrand copper conductor earth continuity wire. directed including matching colour wash.

Supply and wiring of submain with two number 6 sq. mm FRLS PVC insulated 1100 V multistrand single core copper conductor cable in 25 mm dia. heavy gauge PVC conduit concealed in wall complete with 1 number4 sq mm. FRLSH PVC insutatedmultistrand copper conductor earth continuity wire. directed including matching colour wash.

Supply and fixing of LED Tube light with Batten Suitable for Up to 1 x 22 watt LED tube light Fitting including tube on Surface complete in all respect Cat AAA.

Supply and Fixing of call bell approved make on polished MDFEG/ Teak wood board including making connection etc. complete in all respects.

S/F of electronic fan regulator Modular 120-280 V ISI Marked on the existing switch board including making connection , required materials, labour T/P for proper completion of work to the satisfaction of engineer in charge of work.

Supply of Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system BEE 5 star rated-1200 mm sweep.

Labour charge for Lowering and Rising of High Mast Light 16.00 Meter etc. work complete in all respect.

Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing built with driver set suitable for 170 to 200 watt. Confiming to IP 66 Protection complete in all respects. lavaur 18700-22000 system lumens high powar LED with lenses 110m/w,PF0.95THD10% at Full load CRI70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440v&300v auto cut and restart Feature with 5 years warrantee. CAT-AAA

Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect.

Supply/fixing of 63 A 4 Pole Isolator Cat- A

Supply and wiring of submains with 3 nos.2.5 sq mm and 2 nos. 1.5 sq mm FRLSH PVC insulated copper conductor cable. 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.

Supply and wiring of submain with two number 2.5 sq. mm FRLSH PVC insulated 1100 V multi strand single core copper conductor cable in 20 mm dia. heavy duty PVC conduit concealed on surface complete with 1.5 mm FRLSH PVC insulated 1100 V multistrand copper conductor cable as earth continuity wire drawn inside the conduit.

S/L of aluminum conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 501(i) 16 sqmm 4 core cable.

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge. 16sqmm 504 (d)

Supply and burying of 40 mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I., wire and pipe/will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcol . coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.

S/Fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site.

Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entries Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magneticrelease) Switches Complete and instrument chamber etc. Complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F,KWetc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted onnon-hygroscopic supports such as CMC/BMC support with detachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grouting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 200 Amp. MCCB-1 Nos. Outgoing 100 Amp.MCCB-1Nos. and 63 Amp.MCCB 3 Nos. S.I. No.812C ii

S&F of 100Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick around etc. as per directions of Engineer-in-charge complete in all respects as per drawing

Supply & erection of stay set at 3.5 Meters away from the pole complete with galvanized 19 mm dia x1.80 Meter long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect.

Painting of the electric pole with 02 coats of aluminum paint over red oxide primer complete in all respect.

Supply & fixing of LED street light fitting with mandatory driver set having die cast Aluminium body and lenses suitable for 110Watt to 130 Watt and diffuser/ reflecto with driver set suitable for 110 to 130 watt. Confiming to IP 66 Protection having company LOGO Engraved complete in all respects. including Labour.(i) Cat-AAA 12100-14300 system lumens High Power with lenses,110lm/W,PP0.95,THD10%,at full load,CR170, Potted driver set Not Circuitory Phase to phase protection at 440V and 300V auto cut and restart feature with 5 year warrantee. Cat-AAA

S/F of 50mm G.I. Pipe B classcomplete in all respect.

Making plinth of around pole with cement concrete 1:3:6 including excavation ,back filling etc, complete in all respect. (Civil Analisis)