Rajya Krishi Utpadan Mandi Parishad Tender

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) 725 B

S/F of factory wired integral LED flood light luminaries with die cast aluminum housing build with toughend glass UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect including labour 23.26

S&L of 25mm x 3mm G.I. Strip from earth electrodedirectly in the ground as requried complete in all respact 716

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 50sq mm, 3-1/2 core 501 L

(b) 16sq mm 4 core 20A.1.9

S/F of GI pipe 100mm dia DSR 18.14.13.3

Supply and fixing of LED Street light Fitting with mandatory dirver set having die cast aluminium body with tougbend glass UV stabilized PC cover and lenses suitable for 110 to 130 Watt. Confirming to IP 65 and above Protection complete in all respect. 23.17

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634

S/I/T/C of LT panel vermin proof floor mounting M.S channel base with bottom and fabricaetd out of 2.0/1.6mm thick CRCA sheet steel painted with powedr coated paint of shade as per the direction of engineer in charge after proper sheet treatment procese of sheet steel. The bus bar of panel shall be of electrical grade high conductive aluminum alloy of appropriate cross section as per rating the main bus bar shall run throughtout the panel of rating as main incomer rating. the bus bar shall be supported by non hygroscopic SMC/DMC bus bar suports which shall be mounted on proper interval to insure the bear the jerks of short circuit of 50KA for panels having ACB as incomer & 36KA for panels having MCCB Incomers Panel shall be constructed in fully segregated compartment Design for Each feeder as per 3b construction format. The panel shall be completet compartment in all respect as per IS : 8623 part - 2&3. Three shall be separate metering compartment for incomer metcring and outgoing inetering. All incomer feeders shall be provided with multifunction along with multifunction metering along with phase indicating lights and other associated components such as CT. Control MCB Terminal block etc. and all outgoing feeders 100A & above shall be provided with 3 phase ammeter along with phase Indicating lights and other associated components such as CT, control MCB terminal block etc. The feeders above shall be provided acaccommodated all measuring instruments shall be digital type & all indicating lights shall be LED type. Wiring shall be done from 1100V grade PVC insulated copper flexible wire. All ACB shall be Electrically operated draw out type with Mirroproprocessor Based O/L, S/C & E/F relcase of breaking/Withstand capacity (ICU/ICs/ICW) 50KA or more all MCCB shall be Thermall Magneetic/ Mirroproprocessor with O/L & S/C protection along with required spraders & Exended rotary handle with pad locking facilty of breaking capacity (ICU/ICS) 36 KA or more All MCB shall be Thremal 10 KA C Curve Cubicle type switch board shall be cat A&B Only. Incoming: 100 Amp. MCCB- 1No. Outgoing: 63Amp MCCB-1Nos 32 Amp. MCCB-2 Nos Cat B Pannel Cubicle Type. 20.1.1(C)