Rajya Krishi Utpadan Mandi Parishad Tender

Wiring point for Call Bell in 1.5 sq mm FRLSH PVC insulated multi strand single core copper conductor cable (drawn through existing concealed steel conduit) 5 Amp. modular type switch and ceiling rose / angle/ batten holder on 3 mm thick Phenolic laminated sheet mounted over existing M.S switch board box/ junction box with supply of all material, labour & T&P etc required for proper completion of the work as directed at site by the Engineer in charge. with Add for Call bell point with modular type bell push in place of piano type bell push.complete in all respects as directed including matching colour wash.

Supply/fixing of 5/6/7.5/10/15/20/ 25/ 30/32 Amp. MCB 9 Kac Curve CAT A

S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve Cat A

S&F of 40 Amp. 4 pole MCB (10 KA) Cat A

Supply and Fixing of call Bell of Approved make on polished MDFEG/Teak ply board including making connection etc. complete in all respect.1101

S/F of surface/flush mounting 12 ways SPN distribution board without additional metal door without MCB complete in all respect and as directed at site Cat A

S/F of surface/flush mounting 8 ways SPN distribution board without additional metal door without MCB complete in all respect and as directed at site Cat A

Supply /fixing of power plug with 20A/250 V flush type modular switch and 5 pin 20A/250 V flush type socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer

S/F of electronic fan regulator 120-280 V ISI Marked on the existing switch board including making connection , required materials, labour T/P for proper completion of work to the satisfaction of engineer in charge of work.

Supply and wiring of submain with two number 2.5 sq. mm FR PVC insulated 1100 V multi strand single core copper conductor cable in 20 mm dia. heavy gauge rigid steel conduit concealed in wall complete with 14 SWG copper earth continuity wire. directed including matching colour wash.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect.

S/f of LED Tube light with metal heavy duty box type batten light fitting 1x22 watt suitable for up to 1x22 watt LED Polycarbonate tube light complete including tube suitable for both surface &suspended complete in all respect.Cat-AA 2200 system limens 100 lm/w PF0.95,THD10%,CRI80 Sheey thickness 0.8 mm ,tube with aluminium heat with 3 year warrantee.

Supply and fixing of LED Street light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75 to 80 watt and confirming to IP66 Protection having company LOGO Engraved complete in all respect.including laber.8250-9000 system limens high power LED with.lenses,110lm/W,PF0.95,THD10% at full load CRI70,Potted driver set (not circultory),Phase to phase protection at 440V&300V auto cut and restart feature,with five year Warrantee.Cat AAA.

S/F of following 4 Module size (125 mm x 75mm ) module GI box alongwith Modular base and cover Plate for Modular switches in resess etc.

S/F of following 6 Module size (200 mm x 75mm ) module GI box alongwith Modular base and cover Plate for Modular switches in resess etc.

S/F of following 8 Module size (125 mm x 125 mm ) module GI box alongwith Modular base and cover Plate for Modular switches in resess etc.

S/F of following 12 Module size (200 mm x 150 mm ) module GI box alongwith Modular base and cover Plate for Modular switches in resess etc.

Add for Invertor Wiring Point for light/Fan/Plug with 1.5 mm Cu Wire

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming -200 Amp. MCCB-1 Nos. Outgoing-100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos.

S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 70 sq. mm. 3.5 core cable.

Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 50 sq. mm. 3.5 core cable.

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIncharge.

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIncharge.

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.

Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire etc. complete in all respect.

Supply and wiring of submain with two number 10 sq.mm.FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 10 SWG copper earth continuity wire etc. complete in all respect.