Rajya Krishi Utpadan Mandi Parishad Tender

S/I/C/T of full colour LED ticker board consisting of following specifications. Full Color LED Ticker Board for outdoors Screen Size:3840 mm x 2560 mm Full Color modules LED Spacing: 10 mm LED modules resolution 32x16 Physical resolution per cabinet: 96 x 96 dots LED Module size: 160mm x 320mm Cabinet thickness : Minimum 100 mm Cabinet ( 960mm x 960mm) Type:full color LED display SMD 3 in1 Color display : Manual adjust or better Pixel Density: 10000 dots/m2 Brightness : 6500 NITS Software support : window series system (compatible to display videos) Viewing distance: 10- 100m Horizontal Viewing Angle: 160 degree Vertical Viewing Angle: 140 degree Refresh frequency : 1000 Hz Frame frequency 60 Hz Operating temperature: -5 to +50 Relative humidity : 10 to 90% waterproof : IP65 front /IP54 back Working voltage: AC 220V / 50Hz Power consumption: Average 650 W/ m2, Maximum 1600 W/m2 MTBF : 10000 hours Using Lifespan: 50000 hours Dead point ratio: 3/100000 Audio : min.50 watt (to be used only for announcements and government) Communication : GPRS enabled / LAN Ticker board Controller Cpower 7200 Housing of Ticker board: Housing of board must be made with minimum 1.2 mm Thickness sheet with proper welding, Two Doors must be available along with allen key lock, Exhaust fan be made available for heat rejection from the housing. Finish will be epoxy polyester powder coating 60 - 80 micron thickness. color: black smooth+epoxy+polyester Power supply controller: 5 v 60 A MMCB: ISI rated Power Panel: Made of ms structure along with seperate MCB for every cabinet of ticker board Software Features: The software must be provided by the vendor. Software must update all online prices of grains, fruits and vegetables over LED Display boards. Should have the facility to send the text, Pictures and video message as per directed by the Mandi Samiti. Announcement should be available in Hindi and English both. Structure: structure and canopy should be made of GI pipes. Canopy must be made of 0.4 mm or more thick ms sheet. Pole should be made as per attached and approved drawing. The pipe , Bolt, Angle, Channel details are as per drawing Base plate must be made with MS PLATE with thickness as per approved drawing. Concrete must be M20 MS grid should be available in front of Ticker board. Sound system Announcement package: System should be able to announce from control room. System should be attached with amplifier and speaker Audio amplifier capacity 125 w Duty outdoor and horn speaker 25 w Lightning surge protector: Must be as per power rating of Ticker board around 15 KW Excavation and Foundation : The foundation should be as per attached and approved drawing. The Excavation and foundation should be with 5:1 (Ratio) material standard All bars must be high yield strength IS 1786 Splicing of bars not more than 50% Installation & Commissioning: Installation of ticker board over structure as per approved plan in drawing. Commissioning of LED Display wiring cabling installation of power panel along with Lightning surge protector and LAN surge protector Testing: Testing of LED Display Board as per software Warranty: five years from the date of erection The job includes all labour, T&P, and other material required for proper completion as per directions and satisfaction of engineer-in-charge.

(377) S/F of 63 amp 4 pole change over switch on 40X40X6 mm angle iron frame including the cost oflabour, T & P, painting and other materials required for proper completion of work as per direction and satisfaction of E/I

(501K) S/L of aluminum conductor PVC insulated armored, served sheathed cable 1100 grad at dept of 750mm below ground level over a cushion of 75mm thick and sand alround and protected with burnt bricks on sides and the top. On surface, the cable runs should be fixed on M.S. clamps etc. of suitable size as directed by Engineer-in-charge, complete in all respects. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sq.mm 3.5 core