Rajya Krishi Utpadan Mandi Parishad Tender

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun MetalGun Metal. (DSR 16.1)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal. (DSR 18.1)

Fire Axe

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : (a)- 150 nominal bore (DSR 11.6)

(b)- 100 nominal bore (DSR 11.5)

(c)- 80 nominal bore (DSR 11.4)

Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : Threaded joint upto 50mm diameter pipe. Welded joint above 50mm diameter pipe. (a)- 200 mm nominal bore (class C) (DSR 7.9)

(b)- 150 mm nominal bore (class C) (DSR 7.8)

(c)- 100 mm nominal bore (class C) (DSR 7.7)

(d)- 80 mm nominal bore (class C) (DSR 7.6)

(e)- 65 mm nominal bore (class C) (DSR 7.5)

(f)- 50 mm nominal bore (class C) (DSR 7.4)

(g)- 40 mm nominal bore (class C) (DSR 7.3)

(h)- 32 mm nominal bore (class C) (DSR 7.2)

(i)- 25 mm nominal bore (class C) (DSR 7.1)

Providing, laying, testing and commissioning of B class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm (DSR 8.6)

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :(DSR 24.3)

Providing, installation, testing and commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24volts DC supply complete as required. (DSR 28)

Providing, fixing, testing and commissioning of 15mm diaquartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :(a) Pendent Sprinkler. (DSR 21.1)

(b) Upright Sprinkler. (DSR 21.2)

(c) Horizontal side wall sprinkler. (DSR 21.3)

Providing, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below: 4.5 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder. App.

6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers.App.

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in allrespects, as required :(a)-Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.(b)- Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.(c)- M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)- Suitable cement concrete foundation duly plastered with anti vibration pads.(e)- 1620 lpm at 56 m Head.(DSR 1.9)

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)(a)- Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.(b)Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation,conforming to IS : 325.) 180 lpm at 56 m Head (DSR 3.3 )

FIRE PUMPS – DIESEL Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head (DSR 2.9)

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.(DSR 22)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.(DSR 20)

Providing, fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 16 Kg/cm2 and test pressure 24 Kg/cm2 for : (a)- 150 mm dia. (SOR 11)

(b)- 100 mm dia. (SOR 11)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe (DSR 19.2 )

Butterfly valve (manual) with C.I body SS disc nitrile sheet , O ring and PN 16 Pressure rating as specified 100 mm nominal bore. It should be complete in all respect and as per directions of Engineer-in-charge.(a)- 150 mm dia. App.

(b)- 100 mm dia. App.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :150 mm dia. (DSR 14.7)

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. Size 200 mm dia. (DSR 15.4)

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal. (DSR 10.1)

upplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(type-A) as required : Gun Metal. (DSR 16.1)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as.required : Gun metal. (DSR 18.1)

Providing and Fixing of M.S. fire hose weather proof cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings , accessories. The box shall have a front glass door with lock and key arrangement , shall be painted with one coat of primer and two coat of finished stove enamelled post office red colour paint FIRE HOSE written on front. App.

Providing laying, testing and commissioning of c class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.(a)- 150 nominal bore (class C). App

(b)- 80 nominal bore (class C). App

Supply and installation of Butterfly Valves of rating PN 1.6 with mating flanges generally as specified all complete (a)- 150 nominal bore (class C). (DSR 11.6)

(b)- 100 nominal bore (class C). (DSR 11.6)

(c)- 80 nominal bore (class C). (DSR 11.4)

CONTROL PANELS- Fabrication, supply, Insallation testing and commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved.shade after 7 tank treatment process, cable alley, inter- connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump , diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings-630A, 50kA 4 Pole MCCB, Ics/100percent Icu Rating Digital Voltmeter 0-500V with selector switch, Ammeter (0-630 A) with selector swtich and CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps. Outgoings-(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, LED type ON, OFF, trip indicating lamps)Main fire pump-200 Amp, 50kA TPN MCCB, Ics/100percent Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets.Jockey pump-100 Amp, 50kA TPN MCCB, Ics/100percent Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-2 sets.Diesel Engine Control-Control for diesel engine comprising– Automatic/Manual selctor switch and 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode. Indicating lamp for high/ Low Lub.Oil pressure, High Water Temp and Engine on indication. Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 020 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine.System ControllerDesigning,Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. (DSR 5.5)

Exhaust piping-Providing and fixing 150 mm diameter M.S. Class c diesel pump exhaust pipe includings all fittings, like bends, tees etc. clamps / structural steel supports. The pipe shall be provided with 75mm thick fiberglass insulation , covering the insulation with 500 g polythene sheet giving proper overlaps , sealing the joints with suitable adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet cladding. App.