Rajya Krishi Utpadan Mandi Parishad Tender

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) 725 B

S/F of factory wired integral LED flood light luminaries with die cast aluminum housing build with driver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. 1455

S&L of 25mm x 3mm G.I. Strip from earth electrodedirectly in the ground as requried complete in all respact 716

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 50sq mm, 3-1/2 core 501 L

16 sqmm 4 core 501 I

16 sqmm 2 core 501 C

S/F of GI pipe 100mm dia DSR 18.14.13.3

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 65 and above Protection complete in all respect. Cat AAA 1424

S/F OF POTTED DRIVER 110 TO 120 WATT APP

S/F OF SPD APPD

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634

Supply and Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flues type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC supports with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression gland and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in –charge. All out goings of 100 Amp and above shall have as ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A&B Only. Incoming: 100 Amp. MCCB- 1No. Outgoing: 63Amp MCCB-1Nos 32 Amp. MCCB-2 Nos Cat B Pannel Cubicle Type. 811 C ii