Rajya Krishi Utpadan Mandi Parishad Tender

Providing applying tack Coat with bitumen VG-10 grade using exulison pressure distributor at the rate of 0.30 Kg. per sqm on the prepared guanalar surface treated with primer and cleaned with hydraulic broom as per technical specification clause 503

Providing, laying and rolling of open grade premix carpet of 20 mm thickness Composed of 13.2 mm to 5.60 mm aggregates including mixing in a suitable plant. laying with a three wheels 80-100 kN static roller capacity, finished to required leve & grades Bitumen @ 14.6kg/10sqm agea for premixing including Taxesx, Material, Labour and T&P etc required for proper completion of the work as per MORD specification No. 508 (Rates Including of Bitumen VG-10)

Providing and laying seal coat type C over P.C. surface with 6.7mm nominal size grit @ 0.90 Cum/10sqm with bitumen VG-10 @ 6.50 kg/10sqm including heating of bitumen to the required tempreture and including all material labour & T&P etc. complete & Per. MORD specification No. 510 (Rates including of Bitumen VG-10)

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m & lead upto 30m & including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or into the plinth & removal & disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (SI 251)

Providing & laying cement concrete in 1:6:12 (1 cement : 6 coarse sand : 12 graded stone ballast 40mm nominal size) & curing complete, including cost of form work. In Foundation & floors. (SI 273) A

Class-150 brick work in 1:4 cement & Coarse sand of 2.25 fineness modulus mortar in foundation & plinth including supply of all material, labour & T&P etc. required for proper completion of the work.

Struck pointing in 1:2 cement and coarse sand (Ruled Pointing). including supply of all materials labour and T&P etc. required for proper completion of work.

Supply & Laying of 350MM dia R.C.C. Hume pipe including supply of all materials labour and T&P etc. required for proper completion of work.

Coping 1:2:4 in cement coarse sand 20mm stone grit including supply of all materials labour and T&P etc. required for proper completion of work.

Providing & fixing Typical informatory sign board asper MORD specification and drawing. Three M.S. plate of 1.6 mm thick, top and middle plate duty welded with M.S. flat iron 25mm x 5 mm size on back on edges. The lower plate will be welded with M.S angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of lower most plate and flat iron frame of middle plate will be welded to 2 Nos. 75mm x 75mm of 12 SWG sheet tubes post duly embedded in cement conc. M-15 grade black of 450mm x 450mm x 600mm below ground level. All M.S. will be stove enametat on both sides. Lettering and Printing arrows, border etc.will be painted with ready mixed sign thick enamd paints of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing clause 1701 and annexure 1700.

Part-A (Bituminous Work) 05 Year Maintenance Charge @ 15%) Routine Maitenance of road for 05 Years after the competion of work (Vide shasanadesh No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 Dated 16.01.2024 & letter No. 36890C/RMC/Mool-23-24 Dated 17.02.2024 of ENC PWD. Rate Excluding of G.S.T.) 1-1st Year @ Nill

2nd Year @ 1.50%

3rd Year @ 3.00%

4th Year @ 4.50%

5th Year @ 6.00%