Rajya Krishi Utpadan Mandi Parishad Tender

2.50cm thick damop proof course with cement & approved coarse sand 20mm stone grit in proportion of 1:1.5:3 with and including water proofing material as order by E/I in the proportion as specified by the manufactures including supply of all materials, labour T&P etc. required for proper completion of the work. SI 361 A

Painting on D.P.C with two coat of air blown bitumen vg-10 grade @ 1.70Kg / Sqm including supply of all materials, labour,completion of the work. (SI 362)

Earth filling in plinth including supply of necessary quantity of earth from 8.0Km outside the market yard and also including watering.ramming,dressing etc. complete including etc. supply of all materials, labour, & T&P etc. and royality etc (Analysis)

Local sand filling in plinth & under floors including, watering,ramming,consolidation and dressing complete. (SI 255+mat 11)

M-150 brick work in 1:4 cement C/sand of 2.25 FM mortor in super structure,in one brick thick wall including necessary cutting and moulding of brick and also including supply of all material, labour and T&P ect. Required for proper completion of the work. ( SI 303+309)

Same as Item no 8 above but in 1:3 cement & coarse sand in 1/2 brick thick wall.( SI 307+310A)

Cement concrete with 20mm gauge stone grit c/sand and cement in proportion of 4:2:1 including supply of all materials,labour and T&P ect. Required for proper completion of the work. (SI 279A)

Cast Cement 1:2:4 cement concrete doors sills, chaukhats, bopundry post shelves and similar small works with cement approved coarse sand and 2.00cm gauge approved stone grit in proportion of 1:2:4 excluding supply of rainforcement and its bending but including its fixing and binding the same with 252 B.W.G.G.I binding wire and including cost of binding wire and including cost of binding wire, moulds and other materials, labour and T&P etec. required for proper completion of the work.( SI 282)

R.C.C. work with cement approved coarse sand and 2.00cm gauge approved stone grit in proportion 1:2:4 in lintles beem of doors & windows excluding supply of reinforcement but including its fixing and binding the same with 24 B.W.G.G.I. binding wire including necessaroy centering & shuttering and also including supply of all materials labour & T&P etc, required for proper completion of the work. SI 283.

Same as item no-12 above but in 1:1.5:3 in lighter beam. (SI 285)

Same as item no-12 above but in 1:1.5:3 in R.C.C. Slab . (SI 284a)

Same as item n0-12 above but in R.C.C. in 1:1.5:3 in T-beam slab . SI 288

Same as item no-12 above but R.C.C column in 1:1.5:3 (SI 289).

Mild Steel or Iron work in Plain work such as reinforcment concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bends hooks and authrised overlapping shall be measured. SI 504

Mild Steel or Iron work of heavy sizes and sections such as holding down bolts hold fasts chaukhats, Iron, gratinings door frames etc. wrought to required foam including supply of steel and its wastage including cost of bolts nuts if required and welding grinding and making holes as required for proper completion of the work . SI 503

Supply of all materials and fixing M.S grill including fabrication of grill all labour and T&P etc. required for proper completion of the work. (SI 502C)BDS

Approximate cost of oxidised Iron fittings including supply of all materials,labour and T&P etc. required for proper completion of the work. (SI 473).

4.00cm thick 1:2:4 Plain cement Concrete floor with cement approved coarse sand and 2.00cm gauge approved stone grit laid in panels finished with 3mm floating cost of neat cement and including 15cm thick base concrete consisting of stone ballast fine/sand and cement in proportion 12:6:1 including supply of all materials labour and T&P etc. requried for proper completion of the work. SI 273+ 605

Same as item no-21 above but w/o base concrete. (SI 605)

Same as item no-21 above but 2.5 thick floor instead of 4cm thickness and base concrete 8 cm thick (SI 273+600)

Same as item no-23 but without base concrete. (SI 600)

Providing and fixing glass strips of 5.00mm thickness and 3.5 cm deep in joints of floors & skirting at the time of laying floors flush with floor level including supply of all matereials. Labour and T&P ect. Required for propar completion of the work SI 631 D

Same as item no-25 above but 2.2cm deep glass strips (SI 631 C)

2cm thick cement plaster in dado or skirting in 1:3 cement and c/sand laid in finished with 3mm floating coat of neat cement including supply of all materials,labour,and T*P etc. required for proper completion of the work (SI 590)

12mm thick plaster in 1:4 cement and coarse sand mortor over brick work minium thickness not to be less than 10mm including supply of all materials labour and T&P etc. required for proper completion of the work (584 -II)

Same as item no-28 above but in 1:3 cement and coarse sand mortor in celling 6mm thick . (page 36 SI No. 4)

Supply and fixing rolling shutters of approved make made from 80x1.25mm (18gauge) cold rolled M.S. lath intr locked throughout their entire length and joined together at the and by and looks and mounted on specially designed pipe shaft with brackets,side guides and arrangement for in side and outside locking with push and pull opration complete but excluding the cost of top cover and springs. SI 520 BDs

Providing and fixing ball bearing for rolling shutter. SI 523 BDs

Providing and fixing 27.5cm long wire springs grade-2 for rolling shutter. (SI 521)BDS

Providing and fixing top cover for rolling shutters (SI 522)BDS

White washing three coate with lime on undecorated wall surface to give an even shade including thoroughty brooming the surface to remove all dirt,dust mortor drops and other for matteer including supply of all materials labour and T&P etc. Required for proper completion of the work page no 42 ( 672 + 673)

Finishing walls with exterior emulsion paint Apex make two coats of water proof cement paint of approved make such as super snowcem ,durocem,robiacem,gattucem,supercem, quality and of required shade on undeccoreted wall surface overand including one coat white cement prime to give an even shade after throughly brushing the surface to remove all dust and brushing to loose powdered matterials including curing and cost of all materialsd, labour and T&P etc. required for proper completion of the work. Chap. No 15 item 31

Supply and fixing of 110mm PVC pipe complete page no. 11 item no. 28.

P/L Integral cement based water proofing treatment BRICK COBA including preparation of surface as required for treatment of roofs. Consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 including adjoining walls upto 300mm height. b) laying brick bats with mortar with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 26-45 over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope including rounding of junctions of walls and slabs c) After tow days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS : 2645. d) Finishing the surface with 20 mm thick jointiess cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixe with water proofing compound conforming to IS : 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm squre 3 mm deep. e) The whole terrace so finished shall be flooded with water for a miniumum period of two weeks for curing and for final be flooded with water for a minimum period of two week for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65mm.

Antitermite treatemnt of along external wall where the apron is not provided using chemical emulsion @ 7.5 litres /sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete with chlorphriphes/ Undane E.C. 20% with 1% concentration) Chapt-8-2 New)

Supply and laying M-150 class brick on edge floor pavement laid dry joints including preparation of base to proper slope and its ramming including supply of all materials, labour and T&P etc. required for proper completion of the work. (762-b

Supply and fixing mile steel in Z-section openable including supply of all materials labour T&P etc required for proper completion of the work. 502 B (ii) BDs

Laying of 0.625cm thick conpacted leyer of cut back with approved fine sand and maxphalt @ 4% by weight and foundation concrete & sides of concrete and brick work and under floor. Page no. 45 (4-b)

Making grooves 10 to 12mm widex8mm deep in plaster of the wall or in celling verticaly or horizontaly as required Page no. 36

S/F 35mm thick door commercial quality conforming of I.S. 2202 Part -1 (1983) including fixing of wooden cleats and stoppers and incldung fixing and adjustment of hinges, bolt locks, handles,spring fitting etc

Painting two coats over priming coat including cost of priming coat on steel and other metal of wood surface with superior synthetic enamel such as lux of 3 high loss apeolite,superlac,dulux specified burshing to give an even shodeand including cleaning the surface of all dirt dust and other foreign matter sand papering add stopping including cost & all materialsd labour and T&P etc. ( 641+2a+642)

Distempering (Two Coat) with oil bound distemper of approved brand and manufacture & of Required shade on undecorated wall surface to given an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar dropping & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (pwd 649+650)

Providing laying spreading and compact stone aggregates of specific size to water bound macadam, specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100Km in stages to proper grad and camber applying and brooming stone screeing / binding materials to fill-up the interesstices of coarse aggretate watering and compacting to the required density grading 2 as Per Technical specification clause. ( SI 405)

Providing laying spreading and compacting stone aggregates of apecific size to water bound macadam specification including spreading in uniform thickness hand pacing rolling with smooth wheel roller 80-100km in stages to proper grade and camber applying and brooming stone screening/binding materials to fill-up the interstices of coarse aggregate watering and compacting to the require density grading 3 as per technical specification clause. SI No 405.

Laying Cement Concrete pavement ( C.C. Road Slab) consissting 1:1.5:3 Cement coarse sand and approved 2cm gauge stone grit . Over prepared Sub base grade after its recitifications and bringing it to proper camber and including camber and including supply of all material Labour & T&P etc. required for proper completion of work finished to temp as directed by E/I but excluding cost of material required for rectification of the sub grad. ( SI NO 279 (b)

Providing and filling in position bitumen ixfiller of proportion 80kg of hot bitumen 1kg of cement and 0.025 Cum of coarse sand in expansion joints in width upto 2.5cm depth upto 15cm. ( SI NO 3 ) ( Chapt 11-3 New)

Laying of Rubber moulded I shaped precast interlocking tiles of thickness 100mm ( Compressive Strength not less than 30 Mpa and Weight 4.50kg) including 25mm thick local sand base lev elling and dressing of surface to required level and slope filling joints with local sand all complete work.