Rajkiya Engineering College Tender

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.

Supplying & fixing of High Back Chair Overall dimensions shall be as follows: Overall height 1140mm max, 1240 min, overall width 620mm, overall depth 490mm, .Seat and back shall be made up of 12mm thick hot pressed ply wood which shall be upholstered with fabric and molded with polyurethane foam. The back shall be designed with contoured lumbar support. The chair shall have a center tilt mechanism and tilt tension adjustment, single locking facility and full 360 degrees swivel mechanism. One piece arm rest shall be provided which shall be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest shall be scratch and whether resistant. The arm rests shall be fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The prong (base) is made of nylon and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 660mm pitch center dia (700mm with castors . The telescopic bellows shall be 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force.