Rajasthan Police Housing And Construction Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rajasthan Police Housing And Construction Corporation Limited Tender
Eprocure
Opening Date20 Jul 2018
Closing Date18 Aug 2018
Tender Amount₹ 1,85,00,000
Costs
EMD
₹ 3,70,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_RPHCC_117258_11Bid Award Id
ViewTender No
NIT No. 11/ of 2018-19 MD, RPHCCL, JaipurTender Authority
Rajasthan Police Housing And Construction Corporation Limited ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special Conditions
Potential Bid
Front Page
BOQ Items
Supplying Chemical emulsion in sealed container including delivering as specified Chlorpyriphos/Lindane emulsifiable concentrate 20%
45
9495
211
Diluting & injecting Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment)
437.05
17919
41
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -ALL work up to plinth level 1:4:8(1 cement :4 coarse sand : 8 grade stone aggregate 40mm nominal size )
112.5
321609
2858.75
Random Rubble stone masonry for with hard stone in foundation and olinth in cement sand mortar 1:6 (1 Cement 6 Sand above 30cm thick wall.
233.33
573534
2458
Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns ,etc.
105.5
14453
137
Providing and laying in position specified grade of reinforced cement concrete for all RCC structural elements up to plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement : 3- coarse sand ) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix/ Design Mix
310
1274720
4112
Suspended floors, roofs landing starcases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills,chajjas,lintel,beam etc.
2800
826000
295
Columns, Pillers, posts and struts etc
1100
357500
325
Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
229.68
969933
4223
Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
146.02
73884
506
Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry .
146.02
10805
74
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
258.39
1160168
4490
Providing and Laying in positiom specified grade of cement Concrete for RCC structural elements up to floor v Level including curing, compaction, finishing with rendereing in cement sand mortar 1:3 ( 1 Cement: 3 Coarse Sand) and making good the joitns and cost of plasizers (if required ) excluding the cost of centering and shuttering for Walls (any thickness) including attached pilasters, buttresses plinth and string courses, fillets, Columns, pillers, piers, abutments, posts and struts etc M20 grade Nominal Mix/Design Mix
88.45
451285
5102
Add extra for providing richer mixes respctively at all floor levels Providing M25 grade concrete by using min 410 kg of cement per cum instead of M 20 grade design mix
683.51
41010
60
Providing and fabricating reinforcement for R.C.C. work including straightening,cutting,bending,placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
89641.96
5468159
61
Grading roof water proofing treatment with Cement concrete 1:2:4 (1-Cement: 2-coarse sand : 4-graded stone aggreate 20mm nominal size).
54
220050
4075
Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete.
10
1400
140
Crazy marble stone flooring 20mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4 : 7 (4cement : 7 white black or white or black marble chips) size from 1mm to 4mm by volume and under layer of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm nominal size] rubbing and polishing and cement slurry etc. complete :
In ordinary cement.
510
255510
501
Providing and fixing 20mm thick precast terrazzo tiles of approved make, with marble chips of size up to 6mm laid over roof with neat cement slurry mixed with pigment to match the shades of tiles, including cutting, griding rubbing with machine complete on 20mm thick bed of cement sand mortar 1:4
21
6678
318
Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete Rajnagar 1st quality/Ageria with light spots.Up to 1500 Cm2 Tiles Up to 1500 Cm2 Tiles
33.28
31582
949
Providing batta (gola) 75mm*75mm in cement concrete(1:2:4) including finished with cement mortar 1:3 as per standard design
80
8080
101
Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm thick
75
94650
1262
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :(a) Sand or other approved stone 50mm thick.
45
26235
583
(b) Kota stone 25 to 30mm thick.
80.57
34081
423
Providing and fixing Granite stone slab mirror plished and machine edge cut in Wall, Pillars, Steps, Shelves, Sills, Counters. Floors etc.Laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement : 2 marble dust ) with pigment to match the shade of the marble slab complete including grinding,rubbing and polishing of : Green /Black/Other granite Size above 3601 Cm2
70
259350
3705
Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
241
51092
212
Carriage of earth, sand,lime,morrum,mannure or salb etc. including loading, unloading & staking as per specification etc. complete with lead of 10 Km.
1100
117700
107
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
410.3
251511
613
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
154.07
104766
680
Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles.
564.37
38376
68
Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.
410.3
27900
68
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm
125
103500
828
kota stone slabs 25 mm thick in risers of steps, skirting, Dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab from 2001 to 5000 Sqcm.
78.15
67833
868
Kota Stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointing with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq. Cm
733.02
649452
886
Extra for Mirror polishing on terrazzo/ Kota stone work where ever required to give high gloss finish complete.
746.16
78347
105
Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.Red sand stone (Karauli stone)
168.04
120148
715
Providing and Laying water proofing treatement in sunken portion of WCs bathroom etc by applying cement slurry mixed with water proofing cement compound consisting of applying: a) first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours b) Second Layer of slurry of cement @ 0.242kg/sqm mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates shall include preparation of surface treatment & sealing of all joints, corners, junctions with polymer mixed slurry.
89.95
19788
220
Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification.
15.12
18616
1231
Random rubble dry stone Kharanja under floor.
102
82314
807
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 25 mm thick
306
43758
143
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 20 mm thick
1200
153600
128
6mm thick cement plaster to ceiling of mix 1:3 ( 1 cement: 3 Coarse aggregate)
1034.48
96206
93
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 12 mm thick
2497.83
264769
106
Making Grooves as per design in plaster 10mm to 20mm wide
5600
33600
6
Making of drip course (Tapka) in cement sand mortar 1:6 width up to 40mm and 10mm thick as per approved design
176.72
1767
10
Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Roller Finish av. thickness 400 to 500 microns.
1200
177600
148
Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including base coat of water proofing cement paint applied 2.2 Kg/10 Sqm
306
22950
75
Wall painting with plastic emulsion paint of approved brand manufacture to give even shade icluding allscafolding (Two or more coats on new work including preparation of base with primer, putty lippy etc complete in all respect
3532.31
222535
63
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade using ordinary cement.
9
4077
453
Filing available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consoliding each deposited layer by ramming each deposited including layer by ramming and watering including lead upto 50Mtr
1198.34
67106
56
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
4543.78
331695
73
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3
580.9
18007
31
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron)
45
14355
319
For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron)
40
13840
346
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness
8.6
9657
1123
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
4
5184
1296
Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)
5.4
10346
1916
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
3
894
298
Powder coating aluminum ( minimum thickness of powder coating 50 micron)
40
13840
346
Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable.
98.25
323537
3293
Window fixed.
72.49
221884
3061
Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge
98.25
140792
1433
Providing and fixing Square bars or other flat welded to window, ventilators etc.
850
48450
57
Providing and fixing pressed steel mitred door frames confirming to IS 4351 manufacturing from commercial mild steel sheet of 1.25 mm( 16 gauge) thick ness including hinges jamb, lock jamb head and if required angle thresh hold of mild steel angle of section 50x 25 m , or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means , adjustable lugs with split and tail to each jambs including butt hinges 2.5 mm thick with mortar guards , lock strike plate and shock absorber as specified and aplying a coat of approved steel primer after pre traetment of the surfaceincluding filling with CC 1:2:4 (M15 grade) complete as directed by engineer incharge :-Profile B
169.4
63016
372
a) Profile C
229.1
93014
406
b) Profile E
18.3
8033
439
Supply and fixing in cement mortar welded hand railing made out of M.S round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paide extra) with priming coat red oxide.Stair
1066
75686
71
a) Extra for Providing D type pipe head as top of Hand Rail
216
1533
7.1
Providing and fixing steel gate grating and grills made of angles,tees,square bars or other flats black pipe with holdfast and fittings complete per design and drawing including cutting welding and fabrication with priming coat of red oxide.
1000
83000
83
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
56
3864
69
Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint
4.1
10184
2484
Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 25 mmx 25 mm x 2.1 mm
47.38
28994
612
Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 5.0 mm
28.09
18564
661
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).
10.5
47040
4480
Providing and fixing external grade board solid core single lesf flush door shutters ISI 2202-67 marked using Phenol formal , dehydreresion in glue both sides with approved steel fitting complete as per Annexure 'A' Commercial Veneer both side 35mm thick shutter.
99.94
158101
1582
Extra for providing external lipping with 2nd class teak wood battens6mm minimum depth on all edges of shutter (over all area of door shutter to be measured) over item BSR item no 8.13
99.94
12192
122
Painting with enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
577.35
31754
55
Providing and fixing Drapery rod shall be made of 20 gauge cold rolled steel strip. Which is electrical resistance welded, The section will be available 25.4 mm diameter the section shall be coated with acid resistance polymer finial shall made from ABS material in nearest matching colour of rod. The ring shall be made from ABS material in nearest matching colour to rod. Brackets of made of galvanized steel.
60.8
26204
431
P&f rigid PVC Pipe (IS:4985 mark ) class 2nd (4Kg. / Cm) approvd quality / make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia.
91.2
17145
188
P&F rigid PVC pipe fittings (IS; 4985 mark ) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia.
-
-
-
a) Door Tee110mm dia
12
1788
149
b) Bend 45 110mm dia
12
1068
89
c) Door Bend (Left & Right)110mm dia
12
1632
136
d) Pipe Clip 110mm dia
60
1500
25
Part B Tube well
-
-
-
Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). 200mm –do-.
20
26620
1331
Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:
-
-
-
200 mm –do-
135
122580
908
Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well.
10
5450
545
Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 200 mm Nominal bore of pipe
20
31420
1571
Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.
20
36920
1846
S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:
1
339
339
S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
2
484
242
Installation of submersible motor pump set in Tube-well/open well complete ( labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.
1
3338
3338
Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.I. Make. B Class 50 mm dia
150
67950
453
Supplying and installation of submersible pumping motor pump sets I.S.I. Marked (IS : 8034-1989 ) of approved make like K.S.B., KIRLOSKAR, Calama etc. or equivalent, making connection suitable for T.W./D.C.B./Open well. The job includes screwing and welding of flanges on G.I. riser pipes, installation of complete fitting and accessories, with riser pipes, jointing of electrical cables and other connections making switch board electrical connections, all labour for testing of submersible pump set and supply of water to water mains, complete in all respect (Refer Electrical BSR ) 150 mm diameter submersible pump shall have following rating,3HP, 1# phase, (69-125)Mtr, (110-33)LPM Group-I
1
23057
23057
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. 4.0 Sq.mm 3 core flat / Round
200
25600
128
Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. GP1
-
-
-
For single phase Submersible / Monoblock pump
-
-
-
0.5 HP to 3.0 HP
1
3150
3150
Part C Rain Water Harvesting
-
-
-
Construction of tubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with "code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemed completed only after obtaining sound free water during pumping.200 mm nominal bore
40
43560
1089
Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. Diameter 900 mm
40
9680
242
Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness Diameter 900 mm
1
696
696
Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc.
40
10920
273
Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge.
15
2100
140
Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids
-
-
-
Size 9 to 12 mm
5
9075
1815
Size 3 to 5 mm
5
13310
2662
Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids.
2
6776
3388
Part 'D' - Sanitary work
-
-
-
P&F Indian type white glazed vitreous china 1st quality W.C. Orissa pan( IS. 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making the wall and floor. Size 580mmx440 mm
9
18603
2067
P & F European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic)
3
10530
3510
P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked)White
3
1059
353
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:WVC for symphonic EWC.
12
23628
1969
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm dia for counter top
11
24948
2268
P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm.
7
23604
3372
b) P&F W.V.C.(IS:2556)Squatting Urinal of standard make complete,including cutting and making good the wall and floor : size 450X350 mm
4
3100
775
P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinal
4
3884
971
P & F C.P. brass Urinal Spreader for stall urinal of approved make.
11
3025
275
P & F Marble. Urinal Partition slab both sides polised of approved design cut from marble size 900X600mm. Makrana "Albeta" marble having light spreaks
10
7840
784
b) P&F W.V.C. Half- round channel of approved make in C.M. mortar 1:3, Joints finished in white cement of :size 150mm
10
5730
573
P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell ) with large waste coupling. 37x18x7…bowl size(17x15x7(with drain board)
2
8448
4224
P & F Bottle Trap of approved make :C.P Brass 40 mm
11
5060
460
P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.
3
3225
1075
Glass Shelf with edges rounded off Anodised Aluminium angle frame & C.P. brass brackets & guard rail size 600x120mm
4
1092
273
P & F Towel Rail or Ring of approved quality/make:
-
-
-
a) C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
8
3000
375
b) C.P. Brass Towel Ring revolving type
8
1480
185
P & F Grating of approved quality/make:
-
-
-
Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make
18
1260
70
P & F Tooth Paste & Brush Holder of approved quality/make:
-
-
-
Stainless Steel
8
1720
215
P & F Shower arm 15mm dia of approved quality/make.
-
-
-
(-do-) size 370mm.(-do-)
4
1012
253
P & F Bath Shower of approved quality/make.
-
-
-
C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.
4
1544
386
P & F Extension Pipe for bib cocks of approved quality/make.
-
-
-
(-do-) 150 X 15mm.
25
3325
133
P& F Sink Cock of superior quality and approved make : CP Sink Cock, Casted spout 15mm
2
1776
888
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
3
798
266
Providing & fixing C.P.flange for 15mm dia taps.
30
360
12
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.
12
6432
536
(-do-) Long body, 15mm nominal bore weight not less than 690 gm
16
11392
712
P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:
-
-
-
(-do-) Concealed Stop Cock 15mm.
12
11004
917
P&F Ball Cock (IS-1703) with rod & PVC ball complete Brass wt.400 gm,15mm.
5
1140
228
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. with 37 Cm. long pipe and nut.
45
24120
536
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
-
-
-
a) Gun-metal 15mm nominal bore.
10
2060
206
b) (-do-) 25mm nominal bore.
10
4810
481
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1,000 litres capacity.
5
32400
6480
Hoisting charges for each floor
10
1100
110
P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 225 X 150 mm, 15 Kg. C.I. cover with frame Internal Chamber size 450 X 450mm.
6
8058
1343
P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant
-
-
-
110 mm dia
100
18800
188
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
-
-
-
a) Bend 87.5 Dg.
-
-
-
110mm dia
20
2240
112
b) Coupler (socket)
-
-
-
110mm dia
25
1875
75
c) Pipe Clip
-
-
-
110mm dia
60
1500
25
d) Plain Tee
-
-
-
110mm dia
25
3275
131
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
a) 75 mm dia
80
9680
121
b) 110 mm dia
180
43560
242
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
a) Coupler
-
-
-
75mm dia
25
1250
50
110mm dia
20
1500
75
b) Bend 87.5 Dg.
-
-
-
75mm dia
15
975
65
110mm dia
25
2700
108
c) Single 'Y'
-
-
-
75mm dia
20
2000
100
110mm dia
20
3860
193
d) Door Bend 87.5 Dg.
-
-
-
110mm dia
15
2010
134
e) Single Tee with Door
-
-
-
110mm dia
20
3360
168
f) Single Tee
-
-
-
75mm dia
10
830
83
110mm dia
20
2920
146
g) Nahni Trap without Jali 4”
-
-
-
110mm dia
12
1260
105
h) Plain floor trap
-
-
-
110mm dia
12
1932
161
i) Vent Cowel
-
-
-
110mm dia
20
820
41
Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, 25 k.g C.I. cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M
8
34560
4320
Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 100 mm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. size 450 x 450mm depth upto 0.5 M & 15 k.g. C.I. cover with frame
4
6732
1683
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia 25 k.g. each Ferro C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400x140x150cm (for 50users)
1
45067
45067
,-Do-Size 200x100x130 cm.(for 10 users)
1
20570
20570
-Do- Size 230 x110 x150 cm.(for 20 users)
1
28985
28985
Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 90 Cm & 10 to 12 Mtr deep.
3
11385
3795
Add extra if Soakage Well is filled with dry stones.
15.25
4224
277
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
a) 15mm dia nominal bore 'B' Class
170
23290
137
b) 25mm dia nominal bore 'B' Class
150
30000
200
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:
-
-
-
Exposed on wall
-
-
-
a) 15 mm dia nominal bore 'B' Class
120
19920
166
b) 25mm dia nominal bore 'B' Class
60
15540
259
Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal bore B class
150
26400
176
Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
-
-
-
a) 15mm dia nominal bore
25
2300
92
b) 25mm dia nominal bore
25
3725
149
P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:
-
-
-
C.P. Pillar cock, 15 mm dia nominal bore
4
2832
708
P & F Soap Dish or Tray of approved quality/make CP Brass
13
1105
85
P & F Towel Rail or Ring of approved quality/make:C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
10
3750
375
Construction of open surface drain with 112 mm thick brick masonry in cement mortar 1:4, 110 mm thick base concrete 1:5:10, 37mm thick M-15 Concrete, 12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation and disposal of earth complete as per approved design/drawing (150mm drain 225mm avg depth
100
24600
246
Providing Laying & jointing glazed S.W. pipes grade `AA` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150mm dia
40
15498
387.45
Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe). 150mm dia S.W. Pipe.
40
12240
306
Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :
-
-
-
C.P. Brass grating
24
4104
171
Construction of Cement Concrete Chamber 125mm dia.
-
-
-
C.P. Brass grating
12
1452
121
Part 'E' - Electrical work
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
Short point (up to 3 mtr.)
26
5590
215
Medium point (up to 6 mtr.)
74
25012
338
Long point (up to 10 mtr..)
156
73944
474
Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
Long point (up to 10 mtr..)
4
1900
475
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
On board
75
6750
90
Short point (up to 3 mtr.)
4
1004
251
Medium point (up to 6 mtr.)
4
1472
368
Long point (up to 10 mtr..)
16
7968
498
Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required. GP1 ( use semi moduler accessories)
47
25286
538
In Item no. E020100, E020200, E020300 The rates are for flush type PC / Urea series accessories , for using semi modular PC / Urea series accessories, rate shall be increased 2 % in point wiring rate ( For item no. 1 to 4 Total cost Rs. 148926.00 X @2% = 2978.52)
1
2978
2978.52
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.Gr I
-
-
-
20 mm
1200
38400
32
25 mm
2500
105000
42
32 mm
200
13000
65
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Gr I
-
-
-
3x 1.5 sq.mm
200
8000
40
2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt)
3000
159000
53
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt)
60
4620
77
4 x 6.0 sq.mm (Sub main)
170
29920
176
1 x 4.0 sq.mm (With sub main )
170
5100
30
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
102
15402
151
Double pole MCB ( for UPS and AC Point )
-
-
-
6 A to 32 A rating
5
2005
401
Four pole MCB
-
-
-
40 A 63 A rating
7
9646
1378
Triple pole MCB
-
-
-
40 A 63 A rating
6
6204
1034
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Gr I
-
-
-
Double door (single phase)
-
-
-
4 Way
3
2250
750
Double door (Three phase)
-
-
-
6 Way
5
10350
2070
P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GP1
-
-
-
Double door with Provision of Incomer MCCB 100 / 125 A Rating
-
-
-
6 Way
1
5130
5130
P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. GP1
-
-
-
With sheet steel enclosure
-
-
-
Two way
3
870
290
P & F ISI marked following semi modular accessories with decorative cover plate of approved colours including making connections testing est.' as required GP1
-
-
-
RJ-11 telephone jack single two line
3
153
51
RJ-45 computer jack with shutter
20
1820
91
5 step fan regulator
48
10992
229
T.V. socket single outlet
2
56
28
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1
-
-
-
1-2 Module
5
200
40
P & F following size mounting grid plates with cover plates GP1
-
-
-
1/2 Module
5
345
69
SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required. GP1
-
-
-
With Thermal Magnetic release
-
-
-
up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
1
4782
4782
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured
-
-
-
10.0 Sq.mm
-
-
-
4 core ( For Submersible pump)
60
10200
170
25.0 Sq.mm
-
-
-
3.5 core ( For main line)
70
14560
208
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
4 x 10.0 sq.mm
2
126
63
3.5 x 25.0 sq.mm
2
228
114
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
-
-
-
110 / 95 mm
40
8000
200
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
1
4250
4250
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
-
-
-
With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
-
-
-
GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip
1
6150
6150
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
25mm x 6mm G.I. ( Hot Dipped ) Strip
30
3300
110
8 SWG G.I. ( Hot Dipped ) Wire
40
360
9
P&F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 watt at max speed & 230 Volt, air delivery210 CMM, Speed 330 RPM with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.
48
65760
1370
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
48
4560
95
P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I
-
-
-
300 mm sweep
10
18560
1856
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1
-
-
-
300 mm sweep(900/1400 RPM)
4
12008
3002
Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity.GP1
-
-
-
6 kg
6
12408
2068
P & F of IP 65 protected LED Street Light fixture 70-75 watt (with surge protection device 10KA) applicable for area lighting with extruded pressure diecast aluminium housing, system lumens efficancy of 100 Im/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency85% and in compliance to IEC standards system life of 50,000 Burning Hours, CRI80, PF0.90 at full load, CCT 5700-6500 K (as per direction of Engineer incharge). Fixtures shall be CE compliance.
6
27810
4635
S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
-
-
-
32 mm Dia.
6
2460
410
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. GP 1
600
21600
36
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required GP 1
20
7600
380
Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm GP 1
-
-
-
Single Aperture
20
1968
98.4
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable GP 1
-
-
-
9 U(44 mm ) wall mounted
1
10500
10500
P & F ISI marked gong bell including making connection testing etc. as required.GP1
2
120
60
P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.GP1
2
100
50
P & F ISI marked single tone electronic call bell including making connection testing etc. as required.GP1
1
225
225
P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.GP1
1
115
115
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.GP1
34
612
18
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1
27
540
20
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. GP1
-
-
-
4.0 Sq.mm 3 core flat / Round
200
25600
128
Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. GP1
-
-
-
For single phase Submersible / Monoblock pump
-
-
-
0.5 HP to 3.0 HP
1
3150
3150
P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required. GP1
-
-
-
25 Ltr.
2
17815
8907.9
P & F energy efficient/energy saving 9 watt IP 20 LED Bulb cool white, in existing holder/fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K (as per direction of Engineer incharge), ANSI Lamp efficacy minimum 100 lumen /Watt, CRI 80, Driver efficiency 85%, PF 0.95 at full load/230 volt AC.
50
4150
83
P & F of IP20 surface/recess mounted LED downlight made of pressure diecast aluminium housing, with heat sink and good quality reflector, high efficiency external driver, power consumption 14/15 watt, system lumen efficiency 80 lumen/watt, CCT 6000K (minimum) K, CRI80, PF0.9 life time 50,000 burning hours.
75
96375
1285
P&F of IP 20 LED tube light 20 watt external batten mode from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerance system kuman efficiacy oh 100 Lm/watt minimum expected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency85% , Life expectancy of driver min 30000 hrs. PF 0.95 at full load/230 volt AC.
60
16800
280
P&F of 36 Watt IP 20 LED 2'x2' fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from CRCA housing and with high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fisture), life time of more than 50000 burning hours, CCT 6000K (minimum), CRI80 driver maintaining PF0.9.
6
23700
3950
SITC of MNRE approved & confirming to IS:12933 P-1,2,3&5 Flat Plate Collector type solar hot water system with collector, insulated stainless steel storage tank with electrical back up , MS stand for Collector & Tank etc. as required. of following capacity.
-
-
-
500 litre/ day
2
190000
95000
Non BSR but already approved rate Part "F"
-
-
-
P&F of CE & ROHS Certified, IP65 protected “All in one” Solar street
Light luminaries made out from powder coated die cast aluminum alloy housing, comprising of mono-crystalline silicon solar panel, Controller (with MPPT function), PIR sensor can control by remote, Real time on/off function for auto operation of light & Lithium battery with 6 hour charging, 12-16 hours discharge on full power mode and 30-36 hours discharge on power saving mode. With High Power LED’s having individual lens to achieve beam angles, LED Make: Osram, Phillips, Bridgelux, CREE.
-
-
-
12 watt LED
Solar Panel : 18V, 38WH
Battery: 12.8 v, 15AH
Lumen:1200-1320 LM
5
115000
23000
Infrared Bullet / Dome Camera
-
-
-
Supply of 2 MP HD Analog IR Bullet Camera, CMOS/CCD, Min. Illumination 0.01lux (color) & 0lux with IR or better, upto 1920×1080 @ 25fps or better resolutions, 3.6mm fixed lens, able to provide 80° or better angle of view Day/Night, 20 Meter or better IR Range, S/N Ratio 62db or better, shutter speed 1s ~ 1/50,000s, True WDR 120db or better, AGC, White Balance ATW, BLC, DNR, Mirror, 12V DC, power consumption should not be more than 7W, able to work in -40° ~ 60°C temperature or better, IP66 rated housing with fully metal body, complete with mounting accessories. UL, CE and FCC Certification
Approved Makes: LG / SAMSUNG / HIKVISION
4
16400
4100
16 Channel Digital Video Recorder
-
-
-
Supply, Installation, Testing and comissioning of 16 Channel Digital Vedio recorder to support 16-ch 1080P video input with 2 slot for HDD. HDMI output, 1080P playback resolutions, bit rate 32 kbps-10Mbps, complete in all respect as per aboev specifications ( (DVR Approved Makes : Hikvision, Samsung, LG). NVR and Camera should be of the same make for smooth functioning.
1
41500
41500
SITC of 4 TB Surveillance HDD (Approved Makes: Seagate)
2
23000
11500
SITC of SMPS Power Supply required for the above 16 cameras (Standard make)
1
2500
2500
SITC of wiring for analoge camera video and power composite cable (3+1)
300
15000
50
Supply, Installation, Testing and Commisioning of good quality of BNC connector, complete in all respect.
16
560
35
Supply, Installation, Testing and Commisioning of good quality of DC PIN connector, complete in all respect.
8
400
50
Supply of 19" (18.5”) Full HD LED / LCD Security Monitor, LED-Backlit TFT LCD technology with 1366×768 resolutions, Wide view angle: 90°(H)/65°(V), 3D comb filter, 3D De-interlace, 3D noise reduction, HDMI, VGA input, High reliable components for 7×24 working, Brightness: 200cd/m2 or better, Contrast: 600:1 or better, Color: 16.7m or better, VESA stand, power consumption not more than 25W, with HDMI Cable and mounting accessories Approved Makes: LG / SAMSUNG / HIKVISION / HONEYWELL
1
7500
7500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements