Purvanchal Vidyut Vitaran Nigam Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Purvanchal Vidyut Vitaran Nigam Limited - PUVVNL Tender
Civil And Construction
Energy, Oil and Gas
Electrical and Electronics
Electrical Works
Eprocure
Opening Date30 Sep 2024
Closing Date15 Oct 2024
Tender Amount₹ 5,64,83,00,000
Costs
EMD
₹ 5,00,00,000Document Cost
₹ 29,500Tender Fee
Refer Documents
Summary
Modernization Work Under Rdss
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PVVNV_941804_2Bid Award Id
ViewTender No
EAV-08/24-25Tender Authority
Purvanchal Vidyut Vitaran Nigam Limited ViewPurchaser Address
-Website
http://http://puvvnl.up.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply & Erection of 63 KVA, 11/0.415 kV, 3 ph, 50 Hz, ONAN,Aluminium wound,(Energy Efficiency Level-1) CRGO core, outdoor type Station Transformer Completely filled with transformer oil as per technical specifications.
11
-
-
Supply & Erection of hot dip Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS for all structural members. As per TS
66
-
-
Gantry Foundation
44
-
-
Supply & Erecrion of 36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
34
-
-
Construction of Plinth & foundation for 33 kv VCB
34
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 400-200/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
12
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 200-100/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
22
-
-
Construction of Plinth & foundation for 33 kV Single Phase CT (3 Nos.)
34
-
-
Supply & Erection of 36 kV, 1-Phase, 33kV/110 volt, Single core outdoor type Potential Transformer including accessories etc., complete as per technical specifications.( 1 set=3 no) As per TS
11
-
-
Construction of Plinth & foundation for 33 kV Single PT (3 Nos.)
11
-
-
36kV, indoor, Control & Relay panel along with E/F & O/C, Mimic Diagram,Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc. complete as per approved drawings & TS:
-
-
-
Supply & Erection of 33 kV feeder Panel (without diffirential relays) complete As per TS.
12
-
-
Supply & Erection of 33 kV Double Transformer Panel (with diffirential relay and 5/1 A auxillary CT) complete As per TS .
11
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
12
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications. (Without Earth Switch)
22
-
-
Construction of Plinth & foundation for 33 kV isolator
34
-
-
Supply & Erection of 30 kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 set= 3 Nos.)
34
-
-
Construction of Plinth & foundation for 33 kV LA
34
-
-
Supply & Erectionof of 9kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 Set = 3 Nos.)
11
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for Incomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase ,with Numerical Relays & accessories complete as per specifications for transformer breaker protection with earth fault, overcurrent .
22
-
-
Supply & Erection of 12 kV, 1600 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protection with earth fault, overcurrent .
11
-
-
Supply & Erection of 12 KV 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
66
-
-
Supply & Erection of 24V, 150 AH Pb(Lead) Acid battery,with cabinet specifications.
11
-
-
Supply & Erection of 24V, 150 AH. Float-cum-Boost Battery Charger for 230 V, 1 phase, 50 Hz AC Input Supply as per technical specifications.
11
-
-
Supply & Erection of 24V DCDB complete in all respect suitable for 20 nos. of DC circuit for smooth operation of DC supply as per technical specifications.
11
-
-
Supply & Erection of 415V AC Distribution Board/Panel of sheet steal enclosed cubical floor mounting type for catering auxiliary power supply for Suitable 100 KV T/F of the substaion etc. complete
11
-
-
Supply & Erection of ACSR Panther Conductor for Bus-Bars & Jumpers/Droppers/Terminations
3.3
-
-
Earthing & Grounding conductor as per Approved Electrical Layout for each sub- station with
-
-
-
Supply & Erection of 75 x 8 mm GI flat.
2.2
-
-
Supply & Erection of 50 x 6 mm GI flat.
6.05
-
-
Supply & Erection of 32 mm dia MS rod 6 m long for earth mat
7.15
-
-
Supply & Erection of 40 mm dia., 3000 mm long GI pipe earth electrode as per Technical Specification
66
-
-
33 KV and 11 KV Insulator - Pin, Post and Disc insulators along with G.I. Pin, Hardware & Accessories suitable for Panther conductors as per Technical secifications(All the materials shall be MS hot dip galvanised)
-
-
-
Supply & Erection of 33 KV Post Insulator (1 Set = 2 Nos of 22 KV)
100
-
-
Construction of Plinth & foundation for 33 kV Post Insulator
100
-
-
Supply & Erection of 33 KV Disc Insulator Insulator (1 Set = 4 Nos Disc Insulator 70 KN)
66
-
-
Supply & Erection of Hardware fitting for 33 KV Disc Insulator (B&S Type 70 KN)
66
-
-
Supply & Erection of 33 KV Polymer Pin Insulator with Nut & Bolt .
66
-
-
Supply & Erection of Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
11
-
-
Supply & Erection of Station Lighting System (External) 120 Watt, LED with proper illumination complete for switchyard, main gate and sub-station boundry including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. all complte as per applicable TS and approved drawing. (minimum 8 nos on Lighting Poles & 8 nos on structure & control room building )
11
-
-
Supply & Erection of Station Lighting System (internal) with proper illumination complete for control room building, Incharge room, Battery room, Store room, Washroom, Guard room, portico etc. including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. and Celling Fan , wall Fan & exhaust fan (Total 8 nos.) all complte as per applicable TS and approved drawing.
11
-
-
Supply of Tool & Plant: Gum Boot- 2 pair, Hand Gloves- 2 pair, Insulated Plier- 2 nos., D E spanner set- 2 sets, Slide Wrench 8" & 12" 2 nos each, Torch (Flash Light) 4 cell- 2 nos, Earth Tester - 1 no, Insulation Megger (hand operated) 2500 V-1 no, Tong Tester (Digital)- 1 no, Discharge Rod (1 Set=3 Nos)- 2 Sets, Rubber mat (1.25" Thick) for laying in front of all panels in control room completely
11
-
-
Supply & Erection Fire Fighting Equipment comprises of Dry Chemical Powder Type (ABC MAP50 Type As per IS 2171) (6 Kg). 4nos for control room, CO 2 Type of 4.5Kg Capacity 4 nos for Control Room, Fire buckets with Stand set( 4 nos ) including their stand as per technical specifications, scope of works and approved drawings
11
-
-
11 KV, XLPE, Power cable, aluminium conductor, stranded
-
-
-
Supply of 11 kv 3Cx 300 sqmm (armoured) Cable
1320
-
-
Supply of 11 kv 3Cx 185 sqmm (armoured) Cable
3960
-
-
Supply of 11 kv 3Cx70 Sqmm (armoured) Cable
550
-
-
Laying of 11 KV U/G cable includnig cost of sand and bricks
5830
-
-
Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE outdoor
44
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE Indoor
44
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE outdoor
33
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE Indoor
33
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x70 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE outdoor
11
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE Indoor
11
-
-
Control Cable
-
-
-
Supply of 4x2.5 mm sq.
2200
-
-
Supply of of 2x2.5 mm sq.
2200
-
-
Supply of LT Power Cable 3.5Cx95 sq. mm .
770
-
-
Laying of Control Cable
5170
-
-
Furniture items as required
-
-
-
Office table Godrej make
22
-
-
Office chair Godrej make
66
-
-
Godrej Storwel (Almirah) standard size.
22
-
-
11kV Feeder Double Pole structure on 11kV STP alongwith fitting
-
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP- (410 SP 55).
154
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
154
-
-
Supply & Erection of Barbed wire
308
-
-
Supply & Erection of Danger Board
77
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
66
-
-
Supply & Erection of 11 KV fuse set with fixing clamps Angle & Nut & Bolt.
11
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
462
-
-
Supply & Erection of S/S name board (SMC) with stand.
11
-
-
Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
-
-
-
Earth work by mechanical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil
1721.94
-
-
Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift All kinds of soil :
898.59
-
-
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth.
898.59
-
-
Deduct for not watering the excavated earth for banking
898.59
-
-
Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
5200.36
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
412.61
-
-
CEMENT CONCRETE (CAST IN SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
527.12
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
21.12
-
-
CAST IN SITU :- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
439.23
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
380.71
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
311.3
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Foundations, footings, bases of columns, etc. for mass concrete
198
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Columns, Pillars, Piers, Abutments, Posts and Struts
2090
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
440
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Edges of slabs and breaks in floors and walls, Under 20 cm wide
550
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
66
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
110
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
1485
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
550
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
1485
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above to plinth level.
124300
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1229.25
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
798.82
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
1040.05
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
110
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)
220
-
-
First class brick laid dry in foundation and plinth as in circular soakpit walls of one brick thickness and 2.0 to 3.0M depth including cutting moulding bricks as required including cost of all materials labour and T&P complete.
25.74
-
-
S/Filling brick bats including supply of material labour T&P etc. complete ( based on materials rates +10% contracor profit).
30.14
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
1980
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
176.77
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6380
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
176
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
4950
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
176
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
77
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
15400
-
-
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) .
275
-
-
Placing of Trench Cover of all sizes in proper position including transportation from different places within the s/s area including all labour, T&P etc. required for proper complection of the work as per direction of Engineer-in- charge.
110
-
-
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily.
1209.78
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm
352
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
110
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
28.27
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
131.45
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
12225.07
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
1910.15
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster
1892
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
8800
-
-
4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC
564.3
-
-
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
550
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6909.87
-
-
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
10799.03
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
5131.72
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
822.36
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group C (DSR E&M 2022 1.10.3)
407
-
-
Wiring Point for Plug with 1.5 sq. mm. PVC insulated single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall, complete with 1.5 Sq mm multistand copper earth continuity wire with piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as.
88
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet (DSR E&M 2022 1.24.4)
88
-
-
S/F Angle/Batten Holder.
110
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)(DSR E&M 2022 1.27.1)
44
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)(DSR E&M 2022 1.27.2)
33
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)(DSR E&M 2022 1.27.3)
77
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)(DSR E&M 2022 1.27.4)
44
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)(DSR E&M 2022 1.27.5)
22
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)(DSR E&M 2022 1.27.6)
33
-
-
S/wiring Sub main with 2 No. 16sq mm PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit.
385
-
-
Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED light fitting including tube on Surface complete in all respect.
110
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR E&M 2022 5.6)
11
-
-
Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(DSR E&M 2022 2.5.1)
11
-
-
Supply and fixing of 50Amps to 63 Amps MCB 9KA/10KA HAVELLS or equivalent make
88
-
-
Supply and fixing of 63A 240 volts I.C. Cut out of approved make on the metre board or polished MDFEG/Teak ply board. Complete in all respect.
22
-
-
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.
44
-
-
S/F of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
88
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(DSR E&M 2022 1.12)
165
-
-
Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.
11
-
-
Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.
77
-
-
Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work.
11
-
-
Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. (CSI No. 19.28)
11
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
990
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia
660
-
-
Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25)
1100
-
-
Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work.
440
-
-
Supply and fixing of 110mm dia PVC. bail plug of heavy quality including all labour material & T&P.
11
-
-
Supply and fixing of 160mm dia PVC top plug of heavy quality including all labour material & T&P.
11
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp
11
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
93.5
-
-
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
393.8
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5500
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 40 mm nominal bore, 206mm long, weighing not less than 690 gms
11
-
-
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32) a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH
11
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes
440
-
-
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) a) for 1 HP pump set single phase
11
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
528
-
-
S/F of 2.5 sq. mm 3 core P.V.C. sheathed P.V.C. insulated water proof ISI marked, flat flexible copper cable of BEST or other equivalent make, for 1HP and up to 3HP submersible pump sets, complete in all respect.
500.5
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
207.9
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
217.8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
275
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
22
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
22
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
33
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
77
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length
11
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
22
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
11
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
11
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
11
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet , Sand cast iron S&S as per IS: 3989
11
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
11
-
-
Providing and laying 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.
132
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work. c)110 mm dia.
44
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work c) 110 mm dia.
33
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Coupler including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
33
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
22
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
11
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
22
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
17325
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
2200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
17325
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
11
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
17325
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
2200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
17325
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
11
-
-
Supply of Automatic Capacitor Bank as per approved drawings, technical specifications and scope of work (1.98 MVAr With APFC Panel)
-
-
-
Supply & Erection of 12.65 kV, 1980 kVAr, 3-Phase, 50 C/s, housed in Outdoor Type CRCA panel , Capacitor bank having two variable step of 792 Kvar & one Variable steps of 396 kVAr. Bank shall be complete with Capacitor units of 264/132 kVAr,Aluminium busbars, Epoxy insulators, HT HRC fuse,Surge suppressor etc.with details as follows-(1 )11 KV Alumunium wound ,Dry type series reactor(a)0.528 KVAr for 792 KVAr step-6 nos. (b)0.264 KVAr for 396 kVAr step-3 nos. (2) 11 kV, 3-Phase Indoor Dry Type RVT-1 nos. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor-3 nos. (4) Indoor Type Automatic Control Unit-1 No. (5) IP 55, outdoor CRCA cubicle panel for accommodating capacitors, series reactors, vacuum contactor, surge supressor etc., along with FRP canopy-1 No.
11
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(1.98 MVAr HT Capacitor bank)
33
-
-
Supply & Erection of Indoor Type Automatic Control Unit(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(1.98 MVAr HT Capacitor bank)
330
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit outoor(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(1.98 MVAr HT Capacitor bank)
11
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(1.98 MVAr HT Capacitor bank)
18
-
-
Casting of Civil foundation(1.98 MVAr HT Capacitor bank)
11
-
-
Cable trench for laying of power/control cables.(1.98 MVAr HT Capacitor bank)
55
-
-
Supply for ( 1X 10 MVA) New 33/11 KV Substation- SCADA Compatible as per technical specifications, scope of works and approved drawings
-
-
-
Supply &installation, testing and commissioning of 10 MVA Power Transformer
2
-
-
Construction of Power Transformer Plinth of size 3.46x4.46 Mtr. having 0.5 Mtr. below ground level and 0.4 Mtr. above ground level.
2
-
-
Supply & Erection of 63 KVA, 11/0.415 kV, 3 ph, 50 Hz, ONAN,Aluminium wound, CRGO core, outdoor type Station Transformer Completely filled with transformer oil as per technical specifications.( Energy Efficiency Level-1)
2
-
-
Supply & Erection of hot dip Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS for all structural members. As per TS
10
-
-
Gantry Foundation
6
-
-
Supply & Erection of GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS.
0.4
-
-
Supply & Erecrion of 36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
4
-
-
Construction of Plinth & foundation for 33 kv VCB
4
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 400-200/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
2
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 200-100/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
2
-
-
Construction of Plinth & foundation for 33 kV Single Phase CT (3 Nos.)
4
-
-
Supply & Erection of 36 kV, 1-Phase, 33kV/110 volt, Single core outdoor type Potential Transformer including accessories etc., complete as per technical specifications.( 1 set=3 no)
2
-
-
Construction of Plinth & foundation for 33 kV Single PT (3 Nos.)
2
-
-
36kV, indoor, Control & Relay panel along with E/F & O/C, Mimic Diagram,Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc. complete as per approved drawings & TS:
-
-
-
Supply & Erection of 33 kV feeder Panel (without diffirential relays) complete.
2
-
-
Supply & Erection of 33 kV Transformer Panel (with diffirential relay and 5/1 A auxillary CT) complete.
2
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
2
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications. (Without Earth Switch)
2
-
-
Construction of Plinth & foundation for 33 kV Isolator
4
-
-
Supply & Erection of 30 kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 set= 3 Nos.)
4
-
-
Construction of Plinth & foundation for 33 kV LA
4
-
-
Supply & Erectionof of 9kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 Set = 3 Nos.)
2
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for Incomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , with Numerical Relays & accessories complete as per specifications for transformer breaker protection with earth fault, overcurrent .
2
-
-
Supply & Erection of 12 KV 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
8
-
-
Supply & Erection of 24V, 150 AH Pb(Lead) Acid battery,as per technical specifications.
2
-
-
Supply & Erection of 24V, 150 AH. Float-cum-Boost Battery Charger with full wave rectification for 230 V, 1 phase, 50 Hz AC Input Supply as per technical specifications.
2
-
-
Supply & Erection of 24V DCDB complete in all respect suitable for 20 nos. of DC circuit for smooth operation of DC supply as per technical specifications.
2
-
-
Supply & Erection of 415V AC Distribution Board/Panel of sheet steal enclosed cubical floor mounting type for catering auxiliary power supply for Suitable 100 KV T/F of the substaion etc. complete
2
-
-
Supply & Erection of ACSR Panther Conductor for Bus-Bars & Jumpers/Droppers/Terminations
0.6
-
-
Earthing & Grounding conductor as per Approved Electrical Layout for each sub- station with
-
-
-
Supply & Erection of 75 x 8 mm GI flat.
1.1
-
-
Supply & Erection of 50 x 6 mm GI flat.
0.4
-
-
Supply & Erection of 32 mm dia MS rod 6 m long for earth mat
0.6
-
-
Supply & Erection of 40 mm dia., 3000 mm long GI pipe earth electrode as per Technical Specification
12
-
-
33 KV and 11 KV Insulator - Pin, Post and Disc insulators along with G.I. Pin, Hardware & Accessories suitable for Panther conductors as per Technical secifications(All the materials shall be MS hot dip galvanised)
-
-
-
Supply & Erection of 33 KV Post Insulator (1 Set = 2 Nos of 22 KV)
12
-
-
Construction of Plinth & foundation for 33 kV Post Insulator
12
-
-
Supply & Erection of 33 KV Disc Insulator Insulator (1 Set = 4 Nos Disc Insulator 70 KN)
12
-
-
Supply & Erection of Hardware fitting for 33 KV Disc Insulator (B&S Type 70 KN)
12
-
-
Supply & Erection of 33 KV Polymer Pin Insulator with Nut & Bolt .
12
-
-
Supply & Erection of Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
2
-
-
Supply & Erection of Station Lighting System (External) 120 Watt, LED with proper illumination complete for switchyard, main gate and sub-station boundry including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. all complte as per applicable TS and approved drawing. (minimum 8 nos on Lighting Poles & 8 nos on structure & control room )
2
-
-
Supply & Erection of Station Lighting System (internal) with proper illumination complete for control room building, Incharge room, Battery room, Store room, Washroom, Guard room, portico etc. including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. and Celling, wall Fan & exhast fan (Total 8 nos.) all complte as per applicable TS and approved drawing.
2
-
-
Supply & Erection of Tool & Plant: Gum Boot- 2 pair, Hand Gloves- 2 pair, Insulated Plier- 2 nos., D E spanner set- 2 sets, Slide range 8" & 12" 2 nos each, Torch (Flash Light) 4 cell- 2 nos, Earth megger- 1 no, Insulation Megger (hand operated) 1000 V-1 no, Tong Tester (Digital)- 1 no, Discharge Rod (1 Set=3 Nos)- 6 Sets, Rubber mat (1.25" Thick) for laying in front of all panels in control room completely
2
-
-
Supply & Erection Fire Fighting Equipment comprises of Dry Chemical Powder Type (ABC MAP50 Type As per IS 2171) (6 Kg). 4nos for control room, CO 2 Type of 4.5Kg Capacity 4 nos for Control Room, Fire buckets with Stand set( 4 nos ) including their stand as per technical specifications, scope of works and approved drawings
2
-
-
11 KV, XLPE, Power cable, aluminium conductor, stranded
-
-
-
Supply of 11 kv 3Cx 300 sqmm (armoured) Cable
120
-
-
Supply of 11 kv 3Cx 185 sqmm (armoured) Cable
480
-
-
Supply of 11 kv 3Cx70 Sqmm (armoured) Cable
100
-
-
Laying of 11 KV U/G cable includnig cost of sand and bricks
700
-
-
Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE outdoor
4
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE Indoor
4
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE outdoor
6
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE Indoor
6
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x70 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE outdoor
2
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE Indoor
2
-
-
Control Cable
-
-
-
Supply of 4x2.5 mm sq.
200
-
-
Supply of of 2x2.5 mm sq.
200
-
-
Supply of LT Power Cable 3.5Cx95 sq. mm.
140
-
-
Laying of Control Cable
540
-
-
11kV Feeder Double Pole structure on 11kV STP alongwith fitting (as per Annex-9)
-
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP-55 with Base Plate. (410 SP 55)
16
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
16
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps
8
-
-
Suplly & Erection Barbed wire
32
-
-
Suplly & Erection of Danger Board
8
-
-
Supply & Erection of 11 KV fuse set with fixing clamps
8
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
12
-
-
Supply & Erection of S/S name board (SMC) with stand.
2
-
-
Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
-
-
-
Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil
313.08
-
-
Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift All kinds of soil :
163.38
-
-
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth.
163.38
-
-
Deduct for not watering the excavated earth for banking
163.38
-
-
Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
945.52
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
75.02
-
-
CEMENT CONCRETE (CAST IN SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
95.84
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
3.84
-
-
CAST IN SITU :- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
79.86
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
69.22
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
56.6
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Foundations, footings, bases of columns, etc. for mass concrete
36
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Columns, Pillars, Piers, Abutments, Posts and Struts
380
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
80
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Edges of slabs and breaks in floors and walls, Under 20 cm wide
100
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
12
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
20
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
270
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
100
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
270
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above to plinth level.
22600
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
223.5
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
145.24
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
189.1
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
20
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)
40
-
-
First class brick laid dry in foundation and plinth as in circular soakpit walls of one brick thickness and 2.0 to 3.0M depth including cutting moulding bricks as required including cost of all materials labour and T&P complete.
4.68
-
-
S/Filling brick bats including supply of material labour T&P etc. complete ( based on materials rates +10% contracor profit).
5.48
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
360
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
32.14
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1160
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
32
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
900
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
32
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
14
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2800
-
-
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) .
50
-
-
Placing of Trench Cover of all sizes in proper position including transportation from different places within the s/s area including all labour, T&P etc. required for proper complection of the work as per direction of Engineer-in- charge.
20
-
-
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily.
219.96
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm
64
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
20
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
5.14
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
23.9
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
2222.74
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
347.3
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster
344
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
1600
-
-
4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC
102.6
-
-
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
100
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1256.34
-
-
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1963.46
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
933.04
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
149.52
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group C (DSR E&M 2022 1.10.3)
74
-
-
Wiring Point for Plug with 1.5 sq. mm. PVC insulated single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall, complete with 1.5 Sq mm multistand copper earth continuity wire with piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as.
16
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet (DSR E&M 2022 1.24.4)
16
-
-
S/F Angle/Batten Holder.
20
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)(DSR E&M 2022 1.27.1)
8
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)(DSR E&M 2022 1.27.2)
6
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)(DSR E&M 2022 1.27.3)
14
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)(DSR E&M 2022 1.27.4)
8
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)(DSR E&M 2022 1.27.5)
4
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)(DSR E&M 2022 1.27.6)
6
-
-
S/wiring Sub main with 2 No. 16sq mm PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit.
70
-
-
Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED light fitting including tube on Surface complete in all respect.
20
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR E&M 2022 5.6)
2
-
-
Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(DSR E&M 2022 2.5.1)
2
-
-
Supply and fixing of 50Amps to 63 Amps MCB 9KA/10KA HAVELLS or equivalent make
8
-
-
Supply and fixing of 63A 240 volts I.C. Cut out of approved make on the metre board or polished MDFEG/Teak ply board. Complete in all respect.
2
-
-
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.
4
-
-
S/F of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
16
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(DSR E&M 2022 1.12)
30
-
-
Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.
2
-
-
Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.
14
-
-
Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work.
2
-
-
Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. (CSI No. 19.28)
2
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
180
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia
120
-
-
Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25)
200
-
-
Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work.
80
-
-
Supply and fixing of 110mm dia PVC. bail plug of heavy quality including all labour material & T&P.
2
-
-
Supply and fixing of 160mm dia PVC top plug of heavy quality including all labour material & T&P.
2
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp
2
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
17
-
-
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
71.6
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 40 mm nominal bore, 206mm long, weighing not less than 690 gms
2
-
-
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32) a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes
80
-
-
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) a) for 1 HP pump set single phase
2
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
96
-
-
S/F of 2.5 sq. mm 3 core P.V.C. sheathed P.V.C. insulated water proof ISI marked, flat flexible copper cable of BEST or other equivalent make, for 1HP and up to 3HP submersible pump sets, complete in all respect.
91
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
37.8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
39.6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
50
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
4
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
4
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
6
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
14
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length
2
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
4
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
2
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet , Sand cast iron S&S as per IS: 3989
2
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Providing and laying 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.
24
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work. c)110 mm dia.
8
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work c) 110 mm dia.
6
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Coupler including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
6
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
4
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
2
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
4
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
3150
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
400
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
3150
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
2
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
3150
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
400
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
3150
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
2
-
-
3.96 MVAr With APFC Panel As per TS
-
-
-
Supply & Erection of 12.65 kV, 3960 kVAr, 3-Phase, 50 C/s housed in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar& two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr, Aluminium busbars, Epoxy insulators, HT HRC fuse, Surge Suppressor etc.with details as follows-(1) 11 kV, Aluminium Wound, Dry type Series reactors a) 0.528 kVAr for 792 kVArstep - 6 Nos. , b) 0.792 kVAr for 1188 kVAr step - 6 Nos. (2) 11 kV, 3-Phase Dry Type RVT - 1 No. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor - 4 Nos. (4) Indoor Type Automatic Control Unit - 1 No.(5) IP 55 , Outdoor CRCA cubicle Panel for accommodating capacitors, Series Reactor, Vacuum contactor, Surge Suppressor etc., along with FRP Canopy- 1 set
2
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(3.96 MVAr HT Capacitor bank)
6
-
-
Supply & Erection of Indoor Type Automatic Control Unit(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(3.96 MVAr HT Capacitor bank)
30
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(3.96 MVAr HT Capacitor bank)
4
-
-
Casting of Civil foundation(3.96 MVAr HT Capacitor bank)
2
-
-
Cable trench for laying of power/control cables.(3.96 MVAr HT Capacitor bank)
25
-
-
Supply for ( 2X 10 MVA) New 33/11 KV Substation- SCADA Compatible as per technical specifications, scope of works and approved drawings
-
-
-
Supply & installation, testing and commissioning of 10 MVA Power Transformer
2
-
-
Construction of Power Transformer Plinth of size 3.46x4.46 Mtr. having 0.5 Mtr. below ground level and 0.4 Mtr. above ground level.
2
-
-
Supply & Erection of 63 KVA, 11/0.415 kV, 3 ph, 50 Hz, ONAN,Aluminium wound, CRGO core, outdoor type Station Transformer Completely filled with transformer oil as per technical specifications. Energy Efficiency Level-1
1
-
-
Supply & Erection of hot dip Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise. Anchor plate shall be of relevant IS
7
-
-
Gantry Foundation
4
-
-
Supply & Erection of GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanized as per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026. All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
0.31
-
-
Supply & Erecrion of 36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
3
-
-
Construction of Plinth & foundation for 33 kV VCB.
3
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 400-200/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
2
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 200-100/1-1 Amps ( having 2 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
2
-
-
Construction of Plinth & foundation for 33 kV CT .
4
-
-
Supply & Erection of 36 kV, 1-Phase, 33kV/110 volt, Single core outdoor type Potential Transformer including accessories etc., complete as per technical specifications.( 1 set=3 no)
2
-
-
Construction of Plinth & foundation for 33 kV PT
2
-
-
36kV, indoor, Control & Relay panel along with E/F & O/C, Mimic Diagram,Voltmeter, Ammeter, Annunciation Windows with annunciation relays and other components etc. complete as per approved drawings & TS:
-
-
-
Supply & Erection of 33 kV feeder Panel (without diffirential relays) complete.
1
-
-
Supply & Erection of 33 kV Double Transformer Panel (with diffirential relay and 5/1 A auxillary CT) complete As per TS.
1
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
2
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications. (Without Earth Switch)
2
-
-
Construction of Plinth & foundation for 33 kV Isolator .
2
-
-
Supply & Erection of 30 kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 set= 3 Nos.)
3
-
-
construction of Plinth & foundation for 33 kV LA
3
-
-
Supply & Erection of of 9kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 Set = 3 Nos.)
7
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for Incomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , Numerical Relays & accessories complete as per specifications for transformer breaker protection with earth fault, overcurrent .
2
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protection with earth fault, overcurrent .
1
-
-
Supply & Erection of 12 KV 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
6
-
-
Supply & Erection of 24V, 150 AH Pb(Lead) Acid battery As per TS.
1
-
-
Supply & Erection of 24V, 150 AH. Float-cum-Boost Battery Charger for 230 V, 1 phase, 50 Hz AC Input Supply as per technical specifications.
1
-
-
Supply & Erection of 24V DCDB complete in all respect suitable for 20 nos. of DC circuit for smooth operation of DC supply as per technical specifications.
1
-
-
Supply & Erection of 415V AC Distribution Board/Panel of sheet steal enclosed cubical floor mounting type for catering auxiliary power supply for Suitable 100 KV T/F of the substaion etc. complete
1
-
-
Supply & Erection of ACSR Panther Conductor for Bus-Bars & Jumpers/Droppers/Terminations
0.3
-
-
Earthing & Grounding conductor as per Approved Electrical Layout for each sub- station with
-
-
-
Supply & Erection of 75 x 8 mm GI flat.
0.2
-
-
Supply & Erection of 50 x 6 mm GI flat.
0.55
-
-
Supply & Erection of 32 mm dia MS rod 6 m long for earth mat
0.65
-
-
Supply & Erection of 40 mm dia., 3000 mm long GI pipe earth electrode as per Technical Specification
40
-
-
33 KV and 11 KV Insulator - Pin, Post and Disc insulators along with G.I. Pin, Hardware & Accessories suitable for Panther conductors as per Technical secifications(All the materials shall be MS hot dip galvanised)
-
-
-
Supply & Erection of 33 KV Post Insulator (1 Set = 2 Nos of 22 KV)
9
-
-
Construction of Plinth & foundation for 33 kV Post Insulator
9
-
-
Supply & Erection of 33 KV Disc Insulator Insulator (1 Set = 4 Nos Disc Insulator 70 KN)
6
-
-
Supply & Erection of Hardware fitting for 33 KV Disc Insulator (B&S Type 70 KN)
6
-
-
Supply & Erection of 33 KV Polymer Pin Insulator with Pin
6
-
-
Supply & Erection of Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
1
-
-
Supply & Erection of Station Lighting System (External) 120 Watt, LED with proper illumination complete for switchyard, main gate and sub-station boundry including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. all complte as per applicable TS and approved drawing. (minimum 8 nos on Lighting Poles & 8 nos on structure & control room )
1
-
-
Supply & Erection of Station Lighting System (internal) with proper illumination complete for control room building, Incharge room, Battery room, Store room, Washroom, Guard room, portico etc. including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. and Celling, wall Fan & exhast fan (Total 8 nos.) all complte as per applicable TS and approved drawing.
1
-
-
Supply of Tool & Plant: Gum Boot- 2 pair, Hand Gloves- 2 pair, Insulated Plier- 2 nos., D E spanner set- 2 sets, Slide range 8" & 12" 2 nos each, Torch (Flash Light) 4 cell- 2 nos, Earth megger- 1 no, Insulation Megger (hand operated) 1000 V-1 no, Tong Tester (Digital)- 1 no, Discharge Rod (1 Set=3 Nos)- 6 Sets, Rubber mat (1.25" Thick) for laying in front of all panels in control room completely
1
-
-
Supply Fire Fighting Equipment comprises of Dry Chemical Powder Type (ABC MAP50 Type As per IS 2171) (6 Kg). 4nos for control room, CO 2 Type of 4.5Kg Capacity 4 nos for Control Room, Fire buckets with Stand set( 4 nos ) including their stand as per technical specifications, scope of works and approved drawings
1
-
-
11 KV, XLPE, Power cable, aluminium conductor, stranded
-
-
-
Supply of 11 kv 3Cx 300 sqmm (armoured) Cable
120
-
-
Supply of 11 kv 3Cx 185 sqmm (armoured) Cable
360
-
-
Supply of 11 kv 3Cx70 Sqmm (armoured) Cable
50
-
-
Laying of 11 KV U/G cable includnig cost of sand and bricks
530
-
-
Heat Shrinkable jointing kit suitable for 11 kV XLPE 3x300 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE outdoor
4
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x300 Sq. mm. XLPE Indoor
4
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE outdoor
3
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x185 Sq. mm. XLPE Indoor
3
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x70 Sq.mm. cable size
-
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE outdoor
1
-
-
Supply & Erection of Heat Shrinkable jointing kit for 11 kV 3x70 Sq. mm. XLPE Indoor
1
-
-
Control Cable
-
-
-
Supply of 4x2.5 mm sq.
200
-
-
Supply of of 2x2.5 mm sq.
200
-
-
Supply of LT Power Cable 3.5Cx95 sq. mm.
70
-
-
Laying of Control Cable
470
-
-
11kV Feeder Double Pole structure on 11kV STP alongwith fitting (as per Annex-9)
-
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP-55 with Base Plate. (410 SP 55)
12
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
12
-
-
Supply & Erection of Barbd wire
24
-
-
Supply & Erection of Danger Board
7
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
7
-
-
Supply & Erection of 11 KV fuse set with fixing clamps Angle & Nut & Bolt.
1
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
12
-
-
Supply & Erection of S/S name board (SMC) with stand.
1
-
-
Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
-
-
-
Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil
156.54
-
-
Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift All kinds of soil :
81.69
-
-
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth.
81.69
-
-
Deduct for not watering the excavated earth for banking
81.69
-
-
Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
472.76
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
37.51
-
-
CEMENT CONCRETE (CAST IN SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
47.92
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
1.92
-
-
CAST IN SITU :- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
39.93
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
34.61
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
28.3
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Foundations, footings, bases of columns, etc. for mass concrete
18
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Columns, Pillars, Piers, Abutments, Posts and Struts
190
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
40
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Edges of slabs and breaks in floors and walls, Under 20 cm wide
50
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
6
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
10
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
135
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
50
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
135
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above to plinth level.
11300
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
111.75
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
72.62
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
94.55
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
10
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)
20
-
-
First class brick laid dry in foundation and plinth as in circular soakpit walls of one brick thickness and 2.0 to 3.0M depth including cutting moulding bricks as required including cost of all materials labour and T&P complete.
2.34
-
-
S/Filling brick bats including supply of material labour T&P etc. complete ( based on materials rates +10% contracor profit).
2.74
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
180
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
16.07
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
580
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
16
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
450
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
16
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
7
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1400
-
-
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) .
25
-
-
Placing of Trench Cover of all sizes in proper position including transportation from different places within the s/s area including all labour, T&P etc. required for proper complection of the work as per direction of Engineer-in- charge.
10
-
-
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily.
109.98
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm
32
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
10
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
2.57
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11.95
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
1111.37
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
173.65
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster
172
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
800
-
-
4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC
51.3
-
-
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
50
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
628.17
-
-
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
981.73
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
466.52
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
74.76
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group C (DSR E&M 2022 1.10.3)
37
-
-
Wiring Point for Plug with 1.5 sq. mm. PVC insulated single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall, complete with 1.5 Sq mm multistand copper earth continuity wire with piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as.
8
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet (DSR E&M 2022 1.24.4)
8
-
-
S/F Angle/Batten Holder.
10
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)(DSR E&M 2022 1.27.1)
4
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)(DSR E&M 2022 1.27.2)
3
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)(DSR E&M 2022 1.27.3)
7
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)(DSR E&M 2022 1.27.4)
4
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)(DSR E&M 2022 1.27.5)
2
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)(DSR E&M 2022 1.27.6)
3
-
-
S/wiring Sub main with 2 No. 16sq mm PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit.
35
-
-
Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED light fitting including tube on Surface complete in all respect.
10
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR E&M 2022 5.6)
1
-
-
Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(DSR E&M 2022 2.5.1)
1
-
-
Supply and fixing of 50Amps to 63 Amps MCB 9KA/10KA HAVELLS or equivalent make
8
-
-
Supply and fixing of 63A 240 volts I.C. Cut out of approved make on the metre board or polished MDFEG/Teak ply board. Complete in all respect.
2
-
-
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.
4
-
-
S/F of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
8
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(DSR E&M 2022 1.12)
15
-
-
Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.
1
-
-
Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.
7
-
-
Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work.
1
-
-
Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. (CSI No. 19.28)
1
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
90
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia
60
-
-
Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25)
100
-
-
Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work.
40
-
-
Supply and fixing of 110mm dia PVC. bail plug of heavy quality including all labour material & T&P.
1
-
-
Supply and fixing of 160mm dia PVC top plug of heavy quality including all labour material & T&P.
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp
1
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8.5
-
-
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
35.8
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 40 mm nominal bore, 206mm long, weighing not less than 690 gms
1
-
-
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32) a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes
40
-
-
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) a) for 1 HP pump set single phase
1
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
48
-
-
S/F of 2.5 sq. mm 3 core P.V.C. sheathed P.V.C. insulated water proof ISI marked, flat flexible copper cable of BEST or other equivalent make, for 1HP and up to 3HP submersible pump sets, complete in all respect.
45.5
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
18.9
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
19.8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
25
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
2
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
2
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
3
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
7
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length
1
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
2
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
1
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet , Sand cast iron S&S as per IS: 3989
1
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
Providing and laying 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.
12
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work. c)110 mm dia.
4
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work c) 110 mm dia.
3
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Coupler including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
3
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
2
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
1
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
2
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1575
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
1575
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
1
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1575
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
1575
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
1
-
-
3.96 MVAr With APFC Panel As per TS
-
-
-
Supply & Erection of 12.65 kV, 3960 kVAr, 3-Phase, 50 C/s housed in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar& two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr, Aluminium busbars, Epoxy insulators, HT HRC fuse, Surge Suppressor etc.with details as follows-(1) 11 kV, Aluminium Wound, Dry type Series reactors a) 0.528 kVAr for 792 kVArstep - 6 Nos. , b) 0.792 kVAr for 1188 kVAr step - 6 Nos. (2) 11 kV, 3-Phase Dry Type RVT - 1 No. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor - 4 Nos. (4) Indoor Type Automatic Control Unit - 1 No.(5) IP 55 , Outdoor CRCA cubicle Panel for accommodating capacitors, Series Reactor, Vacuum contactor, Surge Suppressor etc., along with FRP Canopy- 1 set
1
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(3.96 MVAr HT Capacitor bank)
3
-
-
Supply & Erection of Indoor Type Automatic Control Unit(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(3.96 MVAr HT Capacitor bank)
15
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(3.96 MVAr HT Capacitor bank)
1
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(3.96 MVAr HT Capacitor bank)
2
-
-
Casting of Civil foundation(3.96 MVAr HT Capacitor bank)
1
-
-
Cable trench for laying of power/control cables.(3.96 MVAr HT Capacitor bank)
5
-
-
Supply for New 33/11 KV Indoor GIS Type Substation- SCADA Compatible as per technical specifications, scope of works and approved drawings
-
-
-
Supply & installation, testing and commissioning of 10 MVA 33/11 kV Transformer with all complete assesories as per TS
2
-
-
Construction of Plinth & Foundation for 10 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS ( On As it is where it is basis)
2
-
-
Supply & Erection of 33 KV GIS Panels with 2 line bays, 2 transformer bays, 1 bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required.
1
-
-
Supply & Erection of 11 KV GIS Panels with 6 line bays, 2 transformer bays, 1 station transformer bay & 1 bus coupler bay, Bus PT, all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
1
-
-
Supply & Erection of 24 V, 150AH,Pb(Lead) Acid type battery set scomplete.
1
-
-
Supply & Erecion of Float-cum-boost battery charger (SMPS based ) with full wave , full control rectification, 50Hz input voltage for charging 24V, 150 AH Battery alongwith DCDB, connectors etc. complete and connection with 24 V , 150 AH Battery set and single phase AC input supply.
1
-
-
Supply & Erection of 415V AC Distribution Board/Panel of sheet steal enclosed cubical floor mounting type for catering auxiliary power supply of the substaion etc. complete
1
-
-
Supply & Erection of 63KVA, 11 kV/0.415 kv Station Transformer alongwith all accessories as per TS.Energy Efficiency Level-1
1
-
-
Supply & Erection of 40mm dia 3000mm long GI Pipe (Medium Grade) earth electrodes & other accessories for treated earth erection is including of Excavation and other associated activities as per TS.
26
-
-
Supply & Erection of 75x6 mm Galvanized flat for raiser for earthing as per TS
1
-
-
Supply & Erection of 30 KV, 1 Phase, 10KA LA with all accessories as per TS.
6
-
-
Supply & Erection of 9 KV, 1 Phase, 10KA LA with all accessories as per TS.
18
-
-
Supply & Laying of 3Cx300 sqmm. 11 KV cable (Panel to Transformer- 1 Run) with cable tray.
200
-
-
Supply & Laynibg of 3Cx400 sqmm. 33 KV cable (Panel to Transformer- 2 Run) with cable tray.
200
-
-
Suppy & Laying of LT Power Cable 3.5Cx95 sq. mm.
70
-
-
Supply & Laying of Control Cable of 2 core 2.5 sq. mm copper cable with cable tray and associated items
150
-
-
Supply & Laynibg of Control Cable of 4 core 2.5 sq. mm copper cable with cable tray associated items
300
-
-
Supply & Laying of Control Cable of 10 core 2.5 sq. mm copper cable with cable tray associated items
150
-
-
Supply of Fire Fighting Equipment comprises of Dry Chemical Powder Type (ABC MAP50 Type As per IS 2171) (6 Kg). 4nos for control room, CO 2 Type of 4.5Kg Capacity 4 nos for Control Room, Fire buckets with Stand set( 4 nos ) including their stand as per technical specifications, scope of works and approved drawings
1
-
-
Supply of Synthetic Rubber mats as per IS 15652 in control room 2.5 mm thik
150
-
-
Supply & Erection of 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm
9
-
-
Supply & Erection of 33 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 400 sqmm(Incoming)
4
-
-
Supply & Erection of 11KV XLPE Cable (3x300 sq.mm.) Heat Shrinkable Jointing kit outdoor
9
-
-
Supply & Erection of 33KV XLPE Cable (3x400 sq.mm.) Heat Shrinkable Jointing kit outdoor
4
-
-
Supply & Erection of Complete lighting system for control room building,main gate and substation boundary including fans as per detailed Technical Specifications.
1
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP-55 with Base Plate. (410 SP 55)
10
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
10
-
-
Supply & Erection of Barbd wire
20
-
-
Supply & Erection of Danger Board
5
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
5
-
-
Supply & Erection of 11 KV fuse set with fixing clamps Angle & Nut & Bolt.
1
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
15
-
-
Civil works: Design, supply of all material, T&P, labour etc for the following civil works complete as per TS
-
-
-
Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift :All kinds of soil
156.54
-
-
Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift All kinds of soil :
81.69
-
-
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth.
81.69
-
-
Deduct for not watering the excavated earth for banking
81.69
-
-
Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
472.76
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
37.51
-
-
CEMENT CONCRETE (CAST IN SITU) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
47.92
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
1.92
-
-
CAST IN SITU :- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
39.93
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
34.61
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
28.3
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Foundations, footings, bases of columns, etc. for mass concrete
18
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Columns, Pillars, Piers, Abutments, Posts and Struts
190
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
40
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Edges of slabs and breaks in floors and walls, Under 20 cm wide
50
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for,Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
6
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
10
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
135
-
-
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
50
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
135
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above to plinth level.
11300
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
111.75
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
72.62
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
94.55
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
10
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)
20
-
-
First class brick laid dry in foundation and plinth as in circular soakpit walls of one brick thickness and 2.0 to 3.0M depth including cutting moulding bricks as required including cost of all materials labour and T&P complete.
2.34
-
-
S/Filling brick bats including supply of material labour T&P etc. complete ( based on materials rates +10% contracor profit).
2.74
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
180
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
16.07
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
580
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
16
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
450
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
16
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
7
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1400
-
-
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) .
25
-
-
Placing of Trench Cover of all sizes in proper position including transportation from different places within the s/s area including all labour, T&P etc. required for proper complection of the work as per direction of Engineer-in- charge.
10
-
-
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily.
109.98
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm
32
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
10
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
2.57
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11.95
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
1111.37
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
173.65
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster
172
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
800
-
-
4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC
51.3
-
-
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
50
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
628.17
-
-
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
981.73
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
466.52
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
74.76
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group C (DSR E&M 2022 1.10.3)
37
-
-
Wiring Point for Plug with 1.5 sq. mm. PVC insulated single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall, complete with 1.5 Sq mm multistand copper earth continuity wire with piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as.
8
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet (DSR E&M 2022 1.24.4)
8
-
-
S/F Angle/Batten Holder.
10
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)(DSR E&M 2022 1.27.1)
4
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)(DSR E&M 2022 1.27.2)
3
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)(DSR E&M 2022 1.27.3)
7
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)(DSR E&M 2022 1.27.4)
4
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)(DSR E&M 2022 1.27.5)
2
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)(DSR E&M 2022 1.27.6)
3
-
-
S/wiring Sub main with 2 No. 16sq mm PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit.
35
-
-
Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED light fitting including tube on Surface complete in all respect.
10
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR E&M 2022 5.6)
1
-
-
Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(DSR E&M 2022 2.5.1)
1
-
-
Supply and fixing of 50Amps to 63 Amps MCB 9KA/10KA HAVELLS or equivalent make
8
-
-
Supply and fixing of 63A 240 volts I.C. Cut out of approved make on the metre board or polished MDFEG/Teak ply board. Complete in all respect.
2
-
-
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.
4
-
-
S/F of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
8
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(DSR E&M 2022 1.12)
15
-
-
Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.
1
-
-
Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.
7
-
-
Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work.
1
-
-
Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. (CSI No. 19.28)
1
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
90
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 300 mm dia
60
-
-
Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25)
100
-
-
Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work.
40
-
-
Supply and fixing of 110mm dia PVC. bail plug of heavy quality including all labour material & T&P.
1
-
-
Supply and fixing of 160mm dia PVC top plug of heavy quality including all labour material & T&P.
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp
1
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8.5
-
-
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
35.8
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 40 mm nominal bore, 206mm long, weighing not less than 690 gms
1
-
-
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32) a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes
40
-
-
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) a) for 1 HP pump set single phase
1
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
48
-
-
S/F of 2.5 sq. mm 3 core P.V.C. sheathed P.V.C. insulated water proof ISI marked, flat flexible copper cable of BEST or other equivalent make, for 1HP and up to 3HP submersible pump sets, complete in all respect.
45.5
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
18.9
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
19.8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
25
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
2
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
2
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
3
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
7
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length
1
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
2
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
1
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet , Sand cast iron S&S as per IS: 3989
1
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
Providing and laying 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.
12
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work. c)110 mm dia.
4
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work c) 110 mm dia.
3
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Coupler including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
3
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
2
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
1
-
-
Providing and fixing SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. c) 110 mm dia.
2
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1575
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
1575
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
1
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1575
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
200
-
-
Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.
1575
-
-
Undisturbed soil samples collected in field will be tested in Laboratory and preparation of samples for tests mentioned below, will be done/governed in accordance with IS 2720 (Part 1)-1983,i) Tri axial compression test and determination of shear parameters(c & ) as per ISS –2720 (Part ix) ISS 2720-(Part xii) ISS 2720-(Part xiii) on silty/sandy soil .Consolidation Test as per ISS-2720( Part xv )on clay soil,ii) Sieve analysis test as per ISS 2720 (Part iv),iii) Atterberg’s limit tests as per ISS –2720 (Part v).iv) Particle size analysis test as per ISS 2720 (Part iv),v) Natural moisture content test as per ISS 2720 (Part vi),vi) Wet density test and dry density test as per ISS 2720 (Part vi),vii) Specific gravity test as per ISS 2720 (Part iii) section 2,Disturbed soil samples will be prepared in accordance with ISS 2720 (Part I) 1983 and tested as follows,i) Sieve analysis test as per ISS – 2720 (part iv),ii) Atterberg’s limit tests as per ISS- 2720(Part v)
1
-
-
Augmentationl Power Transformers( 5 to 10 MVA) SCADA Compatible as per technical specifications, scope of works and approved drawings
-
-
-
Supply &installation, testing and commissioning of 10 MVA 33/11 kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional type PowerTransformer with off load tap charger ( completely field with oil) as per TS
8
-
-
Supply & Erectoion of MS Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise. Anchor plat shall be of relevant IS
1.44
-
-
GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanized as per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026. All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
0.4
-
-
Supply & Erection of 36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
8
-
-
Construction of Plinth & foundation for 33 kV VCB
8
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 200-100/1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications.
8
-
-
Supply & Erection of 33 kV Single Transformer Panel (with diffirential relay and 5/1 A auxillary CT) complete As per TS .
8
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for Incomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type 3 core Current Transformer, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , Numerical Relays & accessories complete as per specifications for transformer breaker protection with earth fault, overcurrent .
8
-
-
Supply & Erection of 12 KV, 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
16
-
-
11 KV, XLPE, Power cable, aluminium conductor, stranded
-
-
-
Supply of 3Cx 300 sqmm (armoured)
400
-
-
Supply of 3Cx 185 sqmm (armoured)
960
-
-
Laying of 11 KV U/G cable includnig cost of sand and bricks
1360
-
-
Cable termination kit suitable for termination in transformer cable box/ breaker panel/ outdoor 11 KV terminals complete with all accessories etc
-
-
-
Supply & Erection Termination kit 3Cx 300 sqmm outdoor
16
-
-
Supply & Erection Termination kit 3Cx 300 sqmm indoor
16
-
-
Supply & Erection of Termination kit 3Cx 185 sqmmoutdoor
8
-
-
Supply & Erection of Termination kit 3Cx 185 sqmm Indoor
8
-
-
Control Cable
-
-
-
Supply of 4x2.5 mm sq.
800
-
-
Supply of of 2x2.5 mm sq.
800
-
-
Laying of Control Cable
1600
-
-
Dismantaling &Transportation from existing site to Store, Installation, Erection, Testing and Commisiioning of 5/8 MVA Power Transformers with suitable Clamps, Connectors, bolts nuts and washers of Brass etc as required with 2 sets each of body & neutral earthing with 50x8 mm GS Strip as per TS completely required for commissioning.
8
-
-
Modification of existing Power Transformer foundation required for installation and commissionig of augmented 5/10 MVA Power Transformers completely as per TS. (As per requirement)
8
-
-
Additional 5 MVA & 10 MVA Power Transformers SCADA Compatible as per technical specifications, scope of works and approved drawings
-
-
-
Supply &installation, testing and commissioning of 5 MVA Power Transformer
5
-
-
Supply &installation, testing and commissioning of 10 MVA Power Transformer
16
-
-
Construction of Plinth & Foundation for 10 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS ( On As it is where it is basis)
16
-
-
Construction of Plinth & FoundationFoundation for 5 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS ( On As it is where it is basis)
5
-
-
Supply & Erectoion of MS Galvanised structures (all Type) made of joist / channel / angle / flat of different sections as per approved drawings. All structural steel members shall be galvanized after fabrication as per IS:4759 for all structural members. 3.5mm spring washers are to be used under each structural steel shall conform to IS 2026. All weld shall be 6mm filled weld unless specified otherwise. Anchor plat shall be of relevant IS
21
-
-
Supply & Erection of GI bolts & nuts, washers etc. (all Type) should be as per approved drawings & TS. All bolts & nuts, washers etc. shall be galvanized as per IS:4759. 3.5mm spring washers are to be used under each nut shall conform to IS 2026. All nuts and bolts shall be of property class 5.6 of IS 1367. Plain washers shall be as per IS 2016 & spring washers shall be IS: 3063 and foundation bolts, shall be of relevant IS
6
-
-
Gantry Foundation
42
-
-
Supply & Erecrion of 36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
21
-
-
Construction of Plinth & foundation for 33 kV VCB
21
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
21
-
-
Supply & Erection of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications. (Without Earth Switch)
21
-
-
Construction of Plinth & foundation for 33 kV Isolator
21
-
-
Supply & Erection of 30kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 set= 3 Nos.)
21
-
-
Construction of Plinth & foundation for 33 kV LA
21
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 400-200/1-1 Amps ( having 3 secondery, core), 1 set = 3 Nos outdoor type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
21
-
-
Construction of Plinth & foundation for 33 kV CT
21
-
-
Supply & Erection of 33 kV Transformer Panel (with diffirential relay and 5/1 A auxillary CT) complete
21
-
-
Supply & Erection 11 KV VCB Switchgears
-
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for Incomer along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer 3 Core, Potential Transformer 11KV/110 V, indoor mounting type control panel for incoming breaker and required accessories, A-meter, volt-meter, 3-phase , , Numerical Relays & accessories complete as per specifications for transformer breaker protection with earth fault, overcurrent .
21
-
-
Supply & Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit Breaker for along with 12 kV, 1-Phase, 25kA, 600-300/5-5 A, 3 Nos indoor type Current Transformer, control panel for Bus couplar and required accessories, A-meter, Numerical Relays & accessories complete as per specifications for Bus Coupler protection with earth fault, overcurrent .
21
-
-
Supply & Erection of 12 KV 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
42
-
-
11 KV 3 Core Al. XLPE Insulated Cable
-
-
-
Supply of 3x300mm sq.
2520
-
-
Supply of 3x185mm sq.
630
-
-
Laying of 11 KV U/G cable includnig cost of sand and bricks
3150
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x300 Sq.mm. cable size
-
-
-
Supply & Erection Termination kit 3Cx 300 sqmm outdoor
42
-
-
Supply & Erection of Termination kit 3Cx 300 sqmm Indoor
42
-
-
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size
-
-
-
Supply & Erection Termination kit 3Cx 185sqmm outdoor
21
-
-
Supply & Erection of Termination kit 3Cx 185 sqmm Indoor
21
-
-
Control Cable
-
-
-
Supply & Laying 4x2.5 mm sq.
2100
-
-
Supply & Laying 2x2.5 mm sq.
200
-
-
Earthing of substation complete as per specification
-
-
-
Supply & Erection of 75 x 8 mm GI flat.
10.5
-
-
Supply & Erection of 50 x 6 mm GI flat.
21
-
-
Supply & Erection of 32 mm dia MS rod 6 m long for earth mat
7.35
-
-
Supply & Erection of 40 mm dia., 3000 mm long GI pipe earth electrode as per Technical Specification
63
-
-
Supply & Erection of 33 KV Post Insulator (1 Set = 2 Nos of 22 KV)
9
-
-
Construction of Plinth & foundation for 33 kV Post Insulator
100
-
-
Supply & Erection of 33 KV Disc Insulator Insulator (1 Set = 4 Nos Disc Insulator 70 KN)
66
-
-
Supply & Erection of Hardware fitting for 33 KV Disc Insulator (B&S Type 70 KN)
66
-
-
Supply & Erection of 33 KV Polymer Pin Insulator with Nut & Bolt .
66
-
-
Supply & Erection of Bimetalic Clamps , Al. Connectors, Al. tape etc. complete in all respect as required.
11
-
-
11kV Feeder Double Pole structure on 11kV STP alongwith fitting
-
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP-55 with Base Plate. (410 SP 55)
84
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
84
-
-
Supply & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
42
-
-
Supply & Erection of Barbed wire
168
-
-
Supply & Erection of Adnger Board
42
-
-
Supply & Erection of 11 KV fuse set with fixing clamps Angle & Nut & Bolt.
42
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
84
-
-
conversion of Existing substations to GIS substations with Increasing capacity and One no E-House additional substation establish SCADA compatibility( 2x10 MVA -2Nos ,3x10 MVA -1 No & 4x10 MVA 2 nos
-
-
-
Supply & installation & Commissioning of 10 MVA 33/11 kV Transformer with all complete assesories as per TS
4
-
-
Construction of Plinth &Foundation for 10 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS
4
-
-
Supply & Erection of 33 KV GIS incomer Panels , all complete with numerical relays, facility for data transmission and remote control . Ap per TS
11
-
-
Supply & Erection of 33 KV GIS outgoing Panels , all complete with numerical relays, facility for data transmission and remote control . As per TS
19
-
-
Supply & Erection of 33 KV GIS bus coupler Panels , all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. As per TS
10
-
-
Supply & Erection of 11 KV GIS incomer Panels with , all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
15
-
-
Supply & Erection of 11 KV GIS Outgoing Panels with , all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
60
-
-
Supply & Erection of 11 KV GIS Bus couplerPanels with , all complete with numerical relays, facility for data transmission and remote control this includes PT raiser panel etc. if required. PT required for each of the bus section.
10
-
-
Supply & Erection of 40mm dia 3000mm long GI Pipe (Medium Grade) earth electrodes & other accessories as per TS.
40
-
-
Supply & Erection of 60x8 mm Galvanized flat for raiser for earthing as per TS
2.5
-
-
Supply & Laying of 3Cx400 sqmm. 33 KV cable (Panel to Transformer- 1 Run) with cable tray.
800
-
-
Supply & Laying of 3Cx300 sqmm. 11 KV cable (Panel to Transformer- 2 Run) with cable tray.
80
-
-
Supply & Laying of Control Cable of 2 core 2.5 sq. mm copper cable with cable tray and associated items
750
-
-
Supply & Laying of Control Cable of 4 core 2.5 sq. mm copper cable with cable tray associated items
1000
-
-
Supply & Laying of Control Cable of 10 core 2.5 sq. mm copper cable with cable tray associated items
750
-
-
Supply & Erection of 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm
85
-
-
Supply & Erection of 33 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 400 sqmm(Incoming)
25
-
-
Supply & Erection of 33KV XLPE Cable (3x400 Sq.mm.) outdoor Heat Shrinkable Termination kit boxes mounted.
15
-
-
Supply & Erection of 11KV XLPE Cable (3x300 Sq.mm.) outdoor Heat Shrinkable Termination kit boxes mounted.
60
-
-
Dismentling of existing 33 KV & 11 Panel including storage, handling, insurance, loading, unloading, transportation to store of Utility as per the direction of Engineer-in-charge with propoer accounting as per the inventory.
69
-
-
Dismentling of existing 33 KV isolator,CT ,PT & CB with structure including storage, handling, insurance, loading, unloading, transportation to store of Utility as per the direction of Engineer-in-charge with propoer accounting as per the inventory.
61
-
-
Dismentling of existing 33 KV Bay with structure including storage, handling, insurance, loading, unloading, transportation to store of Utility as per the direction of Engineer-in-charge with propoer accounting as per the inventory.
1
-
-
E-House Substation establish SCADA compatibility ( 2x10MVA)
-
-
-
Supply , installation, testing and comrnissiong of 10 MVA Power Transformer,33/11 kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional type PowerTransformer with off load tap charger ( completely field with oil) as per TS per
the specifications. The bansformer shall be complete with all accessories shall be provided with cable box termination arrangement on HV & LV side.
2
-
-
Supply, installation, testing and commissioning of Pre-fabricated Containerized Substation shall made of GI (2mm thick for load bearing and 1.5mm for non load bearing members) having IP 54 enclosure with 50mm rockwool 2hr Fire rated thermal insulation Along with
a. 33kV Indoor Primary GIS as per TS ( 2 Incomer VCB +1 Bus Caupler +2 Outgoing VCB for 10 MVA Transformer) — 1 Set
b. llkV Indoor Primary GIS as per TS ( 2 Incomer VCB + 1Bus Caupler +6 Outgoing VCB)- 1 Set
c. 1 No Entry/Exit door Provision for E-House. 1 door shall be suitable for equipment entry from inside only
d. Battery Bank 48VDC 150 AH - 1 Set
e. Dual Float cum Boost Battery Charger suitable for 48 V DC, 80 A ( Auto and Manual) - lNo.
f. ACDB - 1 Set
g. DCDB- 1 set
h. Fire Alarm System & Fire Extinguisher(Co2 type) - 1 Set
i. AC system (N+1) & AC Control panel - 1 Set
j. LT power & control cabling within the container equipment
k. Station earthing grid internal to Container.
l. Lightning protection for Metallic container .
m. Ilumination System normal & emergency (48V DC) lighting, Lighting Panels, switches and sockets.
n. Survillance system complete in all respects(with data backup facilty for 60days)camera 6nos i.e. 2Nos for covering entrance, 2Nos for internal area & 2Nos for acess control system with acess card
o. Metallic container with doors with access control, access platforms.
p. Supply of termination kits for 33kV & llKV GIS & termination of cables at site.
q. Rubber Insulation mats — As required.
Size of Container should be 15 meter X 4.5Meter with sufficient provision for acess (max)
The enclosure shall contain all the indoor equipments like 33KV GIS, llKV GIS, ACDB,DCDB, RTU panel, RTCC panel, banery chargers, Lightining system, Fire safety system as per the tender specifications.The Container should have following
A)33kv Indoor Gas Insulated Switchgear Panel 1250 A, 31.5KA/3sec which consists of 2 No Line feeder,1 Bus Caupler, 2No transformer feeder ( 9 Panels GIS BOARD) as per the enclosed Technical specifications. Internal arc tested panel as per IAC AFLR 31.5 kA for 1sec.The GIS shall be 3 phase combined and single bus type. CT ratio shall be 400/1+1+1+1 A and PT shall be 33000/sqrt3 Volt/110/sqrt3 Volt. Vacuum Circuit breaker, numerical relays having IEC 61850 protocol and multifunctional meters for SCADA compatibility as per atmched technical specification.All the GIS panels shall be operated and monitored through SCADA. B)11kv Indoor Gas Insulated Switchgear Panel 1250A, 25 KA/3sec which consists of 1 No Line feeder, 2 No Substation transformer feeder, 6 Nos Outgoing feeders (9 Panel GIS BOARD) as per the enclosed Technical specifications.Internal arc tested panel as per IAC AFLR 25 kA for 1 sec.The GIS shall be 3 phase combined and single bus type. CT ratio for the incomer shall be ***/1+1+1 A and PT shall be 11000/sqrt3 Volt/110/sqrt 3 Volt. Vacuum Circuit breaker, numerical relays having IEC 61850 protocol and multifunctional meters for SCADA compatibility as per attached technical specification.All the GIS panels shall be operated and monitored through SCADA.
C) Remote Terminal Unit Panel with Ethernet Switch and interposing relay DI/DO as per the mentioned GIS panels list which includes Master Remote Terminal unit, RTU Control Panel & Cabling between RTU and GIS Panel boards.
1
-
-
Supply & Erection of 100KVA, 11 kV/0.415 kv Station Transformer alongwith all accessories as per TS.Energy Efficiency Level-1
1
-
-
Supply & Erection of 40mm dia 3000mm long GI Pipe (Medium Grade) earth electrodes & other accessories for treated earth erection is including of Excavation and other associated activities as per TS.
26
-
-
Supply & Erection of 60x8 mm Galvanized flat for raiser for earthing as per TS
2
-
-
Suplly & Erection of 30 KV, 1 Phase, 10KA LA with all accessories as per TS.
12
-
-
Supply & Erection of 9 KV, 1 Phase, 10KA LA with all accessories as per TS.
21
-
-
Supply & Erection of 3Cx400 sqmm. 33 KV cable (Panel to Transformer- 1 Run) with cable tray.
200
-
-
Supply & Erection of 3Cx300 sqmm. 11 KV cable (Panel to Transformer- 2 Run) with cable tray.
200
-
-
Supply & Laying of Control Cable of 2 core 2.5 sq. mm copper cable with cable tray and associated items
150
-
-
Supply & Laying of Control Cable of 4 core 2.5 sq. mm copper cable with cable tray associated items
300
-
-
Supply & Layingof Control Cable of 10 core 2.5 sq. mm copper cable with cable tray associated items
150
-
-
Supply & Erection Fire Fighting Equipment comprises of Dry Chemical Powder Type (ABC MAP50 Type As per IS 2171) (6 Kg). 4nos for control room, CO 2 Type of 4.5Kg Capacity 4 nos for Control Room, Fire buckets with Stand set( 4 nos ) including their stand as per technical specifications, scope of works and approved drawings
1
-
-
Supply of Synthetic Rubber mats as per IS 15652 in control room 2.5 mm thik
150
-
-
Supply and Erection of 33 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 400 sqmm
4
-
-
Supply and erection of 11 kV Silicon coated touchproof Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm(Incoming)
8
-
-
Supply and Erection of 33KV XLPE Cable (3x400 Sq.mm.) outdoor Heat Shrinkable Termination kit boxes mounted with transformer.
2
-
-
Supply and Erection of 11KV XLPE Cable (3x300 Sq.mm.) outdoor Heat Shrinkable Termination kit boxes mounted with transformer.
6
-
-
Construction of Plinth & Foundation for 10 MVA, 33/11 kV transformer including rail poles as per approved drawing as per TS
2
-
-
Supply & Erection of Station Lighting System (External) 120 Watt, LED with proper illumination complete for switchyard, main gate and sub-station boundry including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. all complte as per applicable TS and approved drawing. (minimum 8 nos on Lighting Poles & 8 nos on structure & control room )
1
-
-
Supply & Erection of Station Lighting System (internal) with proper illumination complete for control room building, Incharge room, Battery room, Store room, Washroom, Guard room, portico etc. including all associated materials such as insulated wires, cables, boards, switches and fixing arrangements etc. and Celling, wall Fan & exhast fan (Total 8 nos.) all complte as per applicable TS and approved drawing.
1
-
-
Construction of Boundary Wall (including supply of material) with fixing of MS angle & Barbed wire fencing(around Transformer and wherever required) all along the boudary wall including Plastering and Distempering(both sides),supply and fixing of main gate - complete with painting (with double coating of metallic primer and paint)etc. all as per approved drawing & TS (Measurement for this purpose will include length of the gate along the boundary wall).
220
-
-
Civils works(including supply of material) for 33/1 lkV containerised substation including foundation, including RCC cable trench with precast trench covers for incoming and outgoing cables(Both 33KV & llKV ) and other related works to complete installation, testing, commissioning of substation included.
1
-
-
Development of land includes filling of land upto two feet above thr adjoining road, construction of wash room cum toilet with septic and overhead water tanks,drainage system, drinking water supply(Borewell with submersible pump set complete),sewerage system of substation, construction of approch road(5mtr wide) etc. as per approved drawing or as per instruction of Engineer -in- Charge (including supply of material)
1
-
-
Development of land includes filling of land upto two feet above thr adjoining road, construction of wash room cum toilet with septic and overhead water tanks,drainage system, drinking water supply(Borewell with submersible pump set complete),sewerage system of substation, construction of approch road(5mtr wide) etc. as per
1
-
-
Constriction (including supply of all material) of RCC cable trench along with pre-cast RCC trench cover, Brick work whenever required all complete as per approved drawing and TS outside the conbol room building - 0.5 Mtrs wide bench.
160
-
-
11kV Feeder Double Pole structure on 11kV STP alongwith fitting (as per Annex-9)
-
-
-
Supply & Erection of 11 Mtr. long Steel Tubulor Pole SP-55 with Base Plate. (410 SP 55)
14
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
14
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
7
-
-
Supply & Erection of 11 KV fuse set with fixing clamps Angle & Nut & Bolt.
1
-
-
Supply & Erection of Earthing of pole by GI earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.
21
-
-
3.96 MVAr With APFC Panel As per TS
-
-
-
Supply & Erection of 12.65 kV, 3960 kVAr, 3-Phase, 50 C/s housed in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar& two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr, Aluminium busbars, Epoxy insulators, HT HRC fuse, Surge Suppressor etc.with details as follows-(1) 11 kV, Aluminium Wound, Dry type Series reactors a) 0.528 kVAr for 792 kVArstep - 6 Nos. , b) 0.792 kVAr for 1188 kVAr step - 6 Nos. (2) 11 kV, 3-Phase Dry Type RVT - 1 No. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor - 4 Nos. (4) Indoor Type Automatic Control Unit - 1 No.(5) IP 55 , Outdoor CRCA cubicle Panel for accommodating capacitors, Series Reactor, Vacuum contactor, Surge Suppressor etc., along with FRP Canopy- 1 set
2
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(3.96 MVAr HT Capacitor bank)
6
-
-
Supply & Erection of Indoor Type Automatic Control Unit(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(3.96 MVAr HT Capacitor bank)
30
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(3.96 MVAr HT Capacitor bank)
2
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(3.96 MVAr HT Capacitor bank)
4
-
-
Casting of Civil foundation(3.96 MVAr HT Capacitor bank)
1
-
-
Cable trench for laying of power/control cables.(3.96 MVAr HT Capacitor bank)
5
-
-
Supply & Erection for New 33 KV Line on 9 mtr PCC pole with DOG conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
176
-
-
Eerection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
57
-
-
Supply & Erection of 9 m PCC Poles - (PCC Pole as per state practice)
1026
-
-
Supply & Erection of Stone Pad (300x300x75mm)
1026
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
1026
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for erection of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
39
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
2
-
-
Supply & Erection of 33 KV danger board
1026
-
-
Supply & Erection of GI Barbed wire 12 SWG
2052
-
-
Supply & Erection of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings
513
-
-
Supply & Erection of 33 KV 10 KN Polymer Pin Insulators
2907
-
-
8 SWG GI Coil 115 turns (1.85 Kg)
1026
-
-
Supply & Erection of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
399
-
-
Grouting of complete stay set with 0.3 cumt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
399
-
-
Supply & Erection of 6 SWG GI wire
2
-
-
Supply & Erection of 8 SWG GI wire
1
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
684
-
-
Supply & Erection for New 33 KV Line on 11 mtr steel tubular pole with DOG conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
49
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
16
-
-
Supply & Erection of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
288
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
288
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for erection of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
11
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
1
-
-
Supply & Erection of 33 KV danger board
288
-
-
Supply & Erection of GI Barbed wire 12 SWG
576
-
-
Supply & Erection of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings (B&S Type)
144
-
-
Supply & Erection of 33 KV 10 KN Polymer Pin Insulators
816
-
-
8 SWG GI Coil 115 turns (1.85 Kg)
288
-
-
Supply & Erection of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
112
-
-
Erection of complete stay set with 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
112
-
-
Supply & Erection of 6 SWG GI wire
0.12
-
-
Supply & Erection of 8 SWG GI wire
0.1
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
192
-
-
Supply & Pinting of silver paint
288
-
-
Supply & Painting of red oxide paint
288
-
-
Supply & Erection for New 33 KV Line on 13 mtr steel tubular pole with DOG conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
12
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
4
-
-
Supply & Erection of 13 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) As per TS
72
-
-
Excvation & Grouting of 13 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
72
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
3
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.62
-
-
Supply & Erection of 33 KV danger board
72
-
-
Supply & Erection of GI Barbed wire 12 SWG
144
-
-
Supply & Erection of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings (B&S Type)
36
-
-
Supply & Erection of 33 KV 10 KN Polymer Pin Insulators
204
-
-
8 SWG GI Coil 115 turns (1.85 Kg)
72
-
-
Supply & Erection of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
28
-
-
Erection of complete stay set with 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
28
-
-
Supply & Erection of 6 SWG GI wire
0.12
-
-
Supply & Erection of 8 SWG GI wire
0.1
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
24
-
-
Supply & Painting of silver paint
72
-
-
Supply & Paintingof red oxide paint
72
-
-
Supply & Erection of 33 KV Under ground cable as per technical specification, approved drawings and scope of work.
-
-
-
Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable .
51.84
-
-
Digging of trench for laying of Double circuit 33KV 3x300 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone/Precast slab ("PuVVNL 33 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
4
-
-
Digging of trench for laying of Single circuit 33KV 3x300 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone/Precast slab ("PuVVNL 33 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
40
-
-
Laying of Single circuit of 3x300 Sq. mm 33 KV XLPE insulated cable underground in cable trenches and earth filling of trenches
48
-
-
Laying of 33 KV 3x300 Sqmm. XLPE Cable underground through HDPE Pipe at 1050 mm below the ground surface.(by HDD method) for road crossing including providing and fixing cable route marker.
3
-
-
Supply of 160 mm dia. HDPE pipe.(PE -80 & PN-6)
3
-
-
Laying of 160 mm dia. HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless) for road crossing.
3
-
-
Supply & Erection of of Heat Shrinkable Jointing Straight Through Kit for 33 KV 3x300 sq. mm XLPE Cable
104
-
-
Supply & Erection of of Heat Shrinkable Jointing Straight Through Kit for 33 KV 3x300 sq. mm XLPE Cable
51
-
-
Supply & Erection of G.I. pipe 150mm with clamp and nut & bolts
0.31
-
-
Hoisting of cable on double pole with the help of cable clamp with N&B of suitable size
1
-
-
Supply & Erection of 33 KV Line underground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection, testing & commissioning of 33 kV LINE FOR UNDER GROUND RAILWAY CROSSING (300 Mtr) BY 2 Nos (INCLUDING ONE SPARE) 3Cx300 Sqmm XLPE Armoured Cable USING 150MM DIA GI PIPES (grade A for underground laying and grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS, LUGS, 4 Nos GI 3-Meters LONG pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
1
-
-
Supply & Erection of 11 KV Line underground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection, testing & commissioning of 33 kV LINE FOR UNDER GROUND Highway CROSSING (200 Mtr) BY 2 Nos (INCLUDING ONE SPARE) 3Cx300 Sqmm XLPE Armoured Cable USING 150MM DIA GI PIPES (grade A for underground laying and grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS, LUGS, 4 Nos GI 3-Meters LONG pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
1
-
-
Supply & Erection For Construction of new 11 KV line on 8.5 mtr PCC pole with weasel conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel
897.34
-
-
Erection of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel
290.4
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
5227
-
-
Supply & Erection of Stone Pad (300x300x75mm)
5227
-
-
Erection of 8.5 m/180 Kgs PCC Poles with Base stone pad including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications (state practices of PCC pole and base plate/stone to be used)
5227
-
-
Supply & Erection of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
136.49
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
9
-
-
Supply & Erection of 11 KV danger board
4937
-
-
Supply & Erection of GI Barbed wire 12 SWG
10454
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
2614
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
14810
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
1742
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
1742
-
-
Stay Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
1742
-
-
Supply & Erection of 6 SWG GI wire
5
-
-
Supply & Erection of 8 SWG GI wire
14
-
-
Supply & Erection of PG Clamp for Weasel to Weasel conductor
2614
-
-
Supply & Erection For Construction of new 11 KV line on 11 mtr STP pole with Rabbit conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
471.63
-
-
Erection of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
152.63
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
2747
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
2747
-
-
Supply & Erection for Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
72
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
5
-
-
Supply & Erection of 11 KV danger board
2595
-
-
Supply & Erection of GI Barbed wire 12 SWG
5494
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
1374
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
7784
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
916
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
916
-
-
Stay Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
916
-
-
Supply & Erection of 6 SWG GI wire
137
-
-
Supply & Erection of 8 SWG GI wire
7326
-
-
Supply & Erection of PG Clamp for Rabbit to Rabbit conductor
1374
-
-
Supply & Painting of silver paint
2747
-
-
Supply & Painting of red oxide paint
2747
-
-
Supply & Erection For Construction of new 11 KV line on 11 mtr STP pole with Dog conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
129.78
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
42
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
756
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
756
-
-
Supply & Erection of New 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
20
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
1
-
-
Supply & Erection of 11 KV danger board
714
-
-
Supply & Erection of GI Barbed wire 12 SWG
1512
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings (B&S Type)
378
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with Nut & Bolt.
2142
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
252
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
252
-
-
Stay Grouthing 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
252
-
-
Supply & Erection of 6 SWG GI wire
680
-
-
Supply & Erection of 8 SWG GI wire
2016
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
378
-
-
Supply & Painting of silver paint
756
-
-
Supply & Painting of red oxide paint
756
-
-
Supply & Erection For Construction of new 11 KV line on 8.5 mtr PCC pole with Rabbit conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
105.06
-
-
Erection of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit
34
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
612
-
-
Supply & Erection of Stone Pad (300x300x75mm)
612
-
-
Excavation and Grouting of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
612
-
-
Supply & Erection of New 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
15.98
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
1.05
-
-
Supply & Erection of 11 KV danger board
578
-
-
Supply & Erection of GI Barbed wire 12 SWG
1224
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
306
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with Nut & Bolt.
1734
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
204
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
204
-
-
Stay Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
204
-
-
Supply & Erection of 6 SWG GI wire
550.8
-
-
Supply & Erection of 8 SWG GI wire
1632
-
-
Supply & Erection of PG Clamp for Rabbit to Rabbit conductor
306
-
-
Supply & Erection of 11 KV Line underground 3*185 XLPE Cable ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply of 3Cx185 Sqmm 11 KV XLPE Armored Cable
36.24
-
-
Digging of trench for laying of double circuit 11KV 3x185 sq.mm XLPE cable and making of trench for two nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone slab /Precast slab ("PuVVNL 11 KV HT" engraved) after laying of cable into the trench including providing and fixing cable route marker.
5
-
-
Digging of trench for laying of Single circuit 11KV 3x185 sq.mm XLPE cable and making of trench for one nos cable with brick on both side, sand filling into the trench and finally trench will be covered with stone slab after laying of cable into the trench.
21.75
-
-
Laying of single circuit of 3x185 Sq. mm 11 KV XLPE insulated cable underground in cable trenches and earth filling of trenches
31.75
-
-
Laying of 11 KV 3Cx185 sq.mm XLPE Cable underground through HDPE Pipe at 950 mm below the ground surface. (by HDD method) including providing and fixing cable route marker.
4.29
-
-
Supply & Erection of 110 mm dia. HDPE pipe .
4.29
-
-
Supply & Erection of Heat Shrinkable Jointing Kit Straight through for 11 KV 3x185 sq. mm XLPE Cable
36
-
-
Supply & Erection of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
72
-
-
Supply & Erection of G.I. pipe 110 mm dia with clamps, Nut and Bolts.
0.2
-
-
Hoisting of cable on double pole with the help of cable clamp with N&B of suitable size
0.2
-
-
Supply & Erection For new 11 KV line on 11 mtr STP with insulated covered (50 sq mm) conductor as per technical specifications, scope of works and approved drawings
-
-
-
Supply Of Insulated ACS Covered Conductor Size equivalent to Rabbit conductor.
21.63
-
-
Erection of Insulated ACS Covered Conductor Size equivalent to Rabbit conductor.
7
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
126
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
126
-
-
Supply & Erection of New 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
3.29
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.22
-
-
Supply & Erection of 11 KV danger board
119
-
-
Supply & Erection of GI Barbed wire 12 SWG
252
-
-
Supply & Erection Tension clamp/Dead Clamp/Anchoring Clamp with Piercing Connectors suitable for MVCC.
336
-
-
Supply & Erection of IPC for CC to CC Connection suitable for MVCC
42
-
-
Supply & Erection of IPC/Connector for Bare to CC Connection suitable for MVCC
42
-
-
Supply & Erection of Suspension/Insulated Ties
770
-
-
Supply & Erection of Mid Span Jointing Kit
42
-
-
Supply & Erection of IPC with Aluminium bail for earthing
42
-
-
Supply & Erection of Termination Kits
42
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
42
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
42
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
42
-
-
Supply & Erection of 6 SWG GI wire
38
-
-
Supply & Erection of 8 SWG GI wire
336
-
-
Supply & Painting of silver paint
126
-
-
Supply & Painting of red oxide paint
126
-
-
Supply & Erection For new 11 KV line on 3x70 sqmm XLPE cable as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 11 Kv Line on 3x70 sqmm XLPE Cable
21.6
-
-
Erection of 11 Kv Line on 3x70 sqmm XLPE Cable
20
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
400
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
400
-
-
Supply & Erection of new 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp, pole clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
9.4
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.62
-
-
Supply & Erection of 11 KV danger board
340
-
-
Supply & Erection of GI Barbed wire 12 SWG
800
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
120
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
120
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
120
-
-
Supply & Erection of 6 SWG GI wire
108
-
-
Supply & Erection of 8 SWG GI wire
960
-
-
Supply & Erection of cable Jointing kit for 11 kv Line 70 sqmm
40
-
-
Supply & Painting of silver paint
400
-
-
Supply & Painting of red oxide paint
400
-
-
Supply & Erection of 11 KV Line underground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection , testing & commissioning for 11 KV line under ground Railway crossing with 2 nos (Including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) using 150mm dia GI pipes (grade A for underground laying and grade B for pole support), Outdoor heat shrinkable cable jointing kit, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
2
-
-
Supply & Erection of 11 LV Line underground Highway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection , testing & commissioning of 11 KV LINE FOR UNDER GROUND Highway CROSSING BY 2 Nos (INCLUDING ONE SPARE) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) USING 160 mm HDPE pipe at road crossing and 150MM DIA GI PIPES (grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES, 7/20 GI wire, CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
1
-
-
New Distribution Transformer 25 KVA 11/433 KV - Supply
-
-
-
supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
410
-
-
Concreting of supports with Grounting of 0.5 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing.As per TS.
410
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.
48
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
2
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators
615
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.
615
-
-
Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.
615
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
410
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
410
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
410
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
2255
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
820
-
-
Supply & Erection of Barbed GI wire 12 SWG
820
-
-
Supply & Erection of PG Clamp suitable for ACSR Rabbit conductor as per TS
615
-
-
Supply & Erection of 11 KV danger board
205
-
-
Supply & Erection of 11 KV, 3-Pole, 3-Ph, 400A, TPMO as per TS
205
-
-
Supply Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS
205
-
-
Supply of 3-Phase, 11/0.4 kV, 25KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS ,Energy Efficiency Level-1
205
-
-
Supply & Erection of LT Distribution box with suitable rating MCCB for incomer & MCCB for two no outgoing feeder suitable for 25 kVA, Distribution Transformer alongwith suitable for pole mounting as per TS
205
-
-
Supply & Erectionof 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)
205
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
410
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
205
-
-
Supply & Erection of 1-Core 70 mm2, Al. LT XLPE Cable as per TS
6150
-
-
New Distribution Transformer 63 KVA 11/433 KV - Supply
-
-
-
supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
368
-
-
Concreting of supports with Grounting f 0.5 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing.As per TS.
368
-
-
Supply & Erectionof new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.
43
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
2
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators
552
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.
552
-
-
Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.
552
-
-
Supply & Erectoin of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
368
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
368
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
368
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
2024
-
-
Supply & Erectoin of 6 SWG GI wire for earthing as per TS
736
-
-
Supply & Erection of Barbed GI wire 12 SWG
736
-
-
Supply & Erection of PG Clamp suitable for ACSR Weasel conductor as per TS
552
-
-
Supply & Erection of 11 KV danger board
184
-
-
Supply & Erection of 11 KV, 3-Pole, 3-Ph, 400A, A B Switch as per TS
184
-
-
Supply & Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS
184
-
-
Supply & Erection of 3-Phase, 11/0.4 kV, 63 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS ,Energy Efficiency Level-1
184
-
-
Supply & Erection of of LT Distribution box with suitable rating MCCB for incomer & MCCB for two no outgoing feeder suitable for 63 kVA, Dist1ibution Transformer alongwith suitable for pole mounting as per TS
184
-
-
Supply & Erection of of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)
184
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
368
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
184
-
-
Supply & Erection of 1-Core 240 mm2, Al. LT XLPE Cable as per TS
6
-
-
New Distribution Transformer 100 KVA 11/433 KV - Supply
-
-
-
supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
410
-
-
Concreting of supports with Grounting f 0.5 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing.As per TS.
410
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.
48
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
2
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators
615
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.
615
-
-
Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.
615
-
-
Supply & Erectoin of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
410
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
410
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
410
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
2255
-
-
Supply & Erectoin of 6 SWG GI wire for earthing as per TS
820
-
-
Supply & Erection of Barbed GI wire 12 SWG
820
-
-
Supply & Erection of PG Clamp suitable for ACSR Weasel conductor as per TS
615
-
-
Supply & Erection of 11 KV danger board
205
-
-
Supply & Erectionof 11 KV, 3-Pole, 3-Ph, 400A, A B Switch as per TS
205
-
-
Supply & Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS
205
-
-
Supply & Erection of 3-Phase, 11/0.4 kV, 100 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS ,Energy Efficiency Level-1
205
-
-
Supply & Erection of LT Distribution box with suitable rating MCCB for incomer & MCCB for two no outgoing feeder suitable for 100 kVA, Dist1ibution Transformer alongwith suitable for pole mounting as per TS
205
-
-
Supply & Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)
205
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm .
410
-
-
Supply & Erection Earthing Arrangement of chemical pipe size of 40x3000 mm. a etc.
205
-
-
Supply & Erection of 1-Core 240 mm2, Al. LT XLPE Cable as per TS
6150
-
-
New Distribution Transformer 250 KVA 11/433 KV - Supply
-
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
1216
-
-
Concreting of supports with Grounting f 0.5 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing.As per TS.
1216
-
-
Supply & Erectionof new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.
142
-
-
Supply & Erectionof hot dip galvanized MS Nuts, Bolts with Washers as per TS
7
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators
1824
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.
1824
-
-
Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.
1824
-
-
Supply & Erectoin of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
1216
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
1216
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
1216
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
6688
-
-
Supply & Erectoin of 6 SWG GI wire for earthing as per TS
2432
-
-
Supply & Erection of Barbed GI wire 12 SWG
2432
-
-
Supply & Erection of PG Clamp suitable for ACSR Weasel conductor as per TS
1824
-
-
Supply & Erection of 11 KV danger board
608
-
-
Supply & Erectionof 11 KV, 3-Pole, 3-Ph, 400A, A B Switch as per TS
608
-
-
Supply & Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS
608
-
-
Supply & Erection of 3-Phase, 11/0.4 kV, 250 KVA, Self Protected, Copper winding & CRGO core Distribution Transformer as per TS, Energy Efficiency Level-1
608
-
-
Supply & Erection of LT Distribution box with suitable rating MCCB for incomer & MCCB for two no outgoing feeder suitable for 250 kVA, Dist1ibution Transformer alongwith suitable for pole mounting as per TS
608
-
-
Supply & Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)
608
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
1216
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
608
-
-
Supply & Erection of 1-Core 240 mm2, Al. LT XLPE Cable as per TS
18240
-
-
Augmentation of 10 kva & 16 kva to 25kva Distribution transformer
-
-
-
Supply & Erection of 11/0.433 kV 25 kVA Distribution Transformer as per TS.Energy Efficiency Level-1
166
-
-
Supply & Erection of LT PVC Cable 3.5x70Sq.mm
5
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
332
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
332
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
332
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
1826
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
332
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
166
-
-
Supply & Erection Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
166
-
-
Replacment & Transpotation Charge of Existing Distribution Transformer
166
-
-
Augmentation of 25 Kva to 63kva Distribution transformer
-
-
-
Supply & Erection 11/0.433 kV 63 kVA Distribution Transformer as per TS. Energy Efficiency Level-1
899
-
-
Supply & Erection LT PVC Cable 3.5x70Sq.mm
26970
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
1798
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
1798
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
1798
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
9889
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
1798
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
899
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
899
-
-
Replacment & Transpotation Charge of Existing Distribution Transformer
899
-
-
Augmentation of 63 kva to 100 kva Distribution transformer
-
-
-
Supply & Erection of 11/0.433 kV 100 kVA Distribution Transformer as per TS. Energy Efficiency Level-1
607
-
-
Supply & Erection of LT PVC Cable 3.5x150Sq.mm
18
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
1214
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
1214
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
1214
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
6677
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
2428
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
1214
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
607
-
-
Replacment & Transpotation Charge of Existing Distribution Transformer
607
-
-
Augmentation of 100 kva & 160 kva to 250 kva Distribution transformer
-
-
-
Supply & Erection of 11/0.4 KV Distribution Transformer 250 KVA 3 phase DTR(Copper Winding), Energy Efficiency Level-1
253
-
-
Supply & Erectionof LT PVC cable AI 3.5x400 sq mm
8
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
506
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
506
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
506
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
2783
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
1012
-
-
Supply & Erectionof Earthing for pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
506
-
-
Supply & Erection of Earthing for Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
253
-
-
Replacment & Transpotation Charge of Existing Distribution Transformer
253
-
-
Augmentation of 250 kva to 400 kva Distribution transformer
-
-
-
Supply & Erection of 11/0.4 KV Distribution Transformer 400 KVA 3 phase DTR(Copper Winding, Energy Efficiency Level-1
30
-
-
Supply & Erection of LT PVC XLPE cable AI 1x400 sq mm
600
-
-
Supply & Erection of LT PVC XLPE cable AI 1x240 sq mm
900
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
60
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
60
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
60
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
330
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
120
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm & 6SWG earthing wire etc.
60
-
-
Supply & Erectionof Earthing Arrangement of chemical pipe size of 40x3000 mm. and 6 SWG earthing wire etc.
30
-
-
Supply & Erection of Al Lug long barrel, off size (LS)
720
-
-
Replacment & Transpotation Charge of Existing Distribution Transformer
30
-
-
Supply & Erection of Trolly Mounted DT- of 400KVA as per technical specifications, scope of works and approved drawings
-
-
-
Supply & Erection of 11/0.415 kV 400 KVA Distribution Transformer Copper Winding. Energy Efficiency Level-1
8
-
-
Supply & Erection of Fabricated Trolley With 4 Tyre wheels to house Transformer with all fixing Arrangement along with fencing and locking mechanism.
8
-
-
Supply & Erection of 3x50 mm² 11KV class XLPE Cable.
80
-
-
Supply & Erection of Heat shrinkable Termination kits suitable for 3x50 mm²Xlpe Cable (out door) including bushing cap.
16
-
-
Supply & Erection of 400 Sq.mm., LT single core `XLPE insulated un-armoured aluminium conductor cable
320
-
-
Supply & Erection of Protection of DT as per technical specifications, scope of works and approved drawings
-
-
-
Supply & Erection of AB switch suitable for Distribution Transformer 100 KVA and above
4
-
-
Supply & Erection of DO Fuse set suitable for Distribution Transformer 100 KVA and above
1300
-
-
Supply & Erection of LT ACB suitable for Distribution transformers having capacity 250 KVA and above Ap per TS
9
-
-
Supply & Erection of LT Distribution box suitable for Distribution Transformer upto 250 KVA As per TS
766
-
-
Supply & Erection of LT Distribution box suitable for Distribution Transformer 400 KVA and above As per TS
37
-
-
Supply & Erection of DT Cable with Lugs & Clamp as per technical specifications, scope of works and approved drawings
-
-
-
Supply & Erection of LT XLPE Insulated Cable 1CX240 Sqmm
12
-
-
Supply & Erection LT XLPE Insulated Cable 1CX400 Sqmm
17
-
-
Supply & ErectionLTXLPE Insulated Cable 1CX630 Sqmm
17
-
-
New LT line on 8.5 mtr PCC pole with AB cable ( (1x16+1x25+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 1X16 sqmm (Ph) + 1x25 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
12
-
-
Eection of LT Aerial bunched XLPE cable 1X16 sqmm (Ph) + 1x25 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
11
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
290
-
-
Concreting of supports with Grounting f 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
290
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
1
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
110
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
110
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
110
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
110
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
550
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
99
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
220
-
-
Supply & Erectionof 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
330
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
264
-
-
Supply of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
110
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
264
-
-
Supply & Erection of LT Insulation piercing connector 16 -16 sqmm size for phase connection as per TS & approve drawing
99
-
-
Supply & Erection of LT Insulation piercing connector 16-25 sqmm size for phase connection as per TS & approve drawing
660
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
255
-
-
New Lt 8.5 Mtr PCC LT Ckt. with AB Cable (3x50+1x35+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
391
-
-
Erection of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
373
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
9313
-
-
Concreting of supports with Grounting f 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
9313
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
43
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
7
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
3725
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
3725
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
3725
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
3725
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
18625
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
8382
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
7450
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
11175
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
8940
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
3725
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
9313
-
-
Supply & Erection of LT Insulation piercing connector 50 -50 sqmm size for phase connection as per TS & approve drawing
3353
-
-
Supply & Erection of LT Insulation piercing connector 50-35 sqmm size for phase connection as per TS & approve drawing
22350
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
12293
-
-
LT line on 8.5 mtr PCC pole with AB cable (3x95+1x70+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
479
-
-
Erection of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
456
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
11400
-
-
Concreting of supports with Grounting f 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
11400
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
53
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
9
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
4560
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
4560
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
4560
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
4560
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
22800
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
4104
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
9120
-
-
Supply & Erectionof 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
13680
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
10944
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
4560
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
10944
-
-
Supply & Erection of LT Insulation piercing connector 95 -95 sqmm size for phase connection as per TS & approve drawing
4104
-
-
Supply & Erection of LT Insulation piercing connector 95-35 sqmm size for phase connection as per TS & approve drawing
27360
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
10488
-
-
LT line with 11 mtr steel tubular pole with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
346
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
330
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
8238
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
8238
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
38
-
-
Supply & Erectionof hot dip galvanized MS Nuts, Bolts with Washers as per TS
7
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
3295
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
3295
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
3295
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
3295
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
16275
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
2930
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
6510
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
9765
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
7812
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
3255
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
8138
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
2930
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
19530
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
7487
-
-
LT line with 11 mtr steel tubular pole with AB cable (3x150+1x120+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
81
-
-
Erection of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
77
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
1928
-
-
Gruoting Of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
1928
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
9
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
2
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
771
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
771
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
771
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
771
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
3855
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
694
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
1542
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
2313
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
1850
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
771
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
1928
-
-
Supply & Erection of LT Insulation piercing connector 150 -150 sqmm size for phase connection as per TS & approve drawing
694
-
-
Supply & Erection of LT Insulation piercing connector 150-35 sqmm size for phase connection as per TS & approve drawing
4626
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
3855
-
-
Strengthening of LT infrastructure by removal of bans and balli in identified areas-Schedule for regularisation of Bas Balli cable for under Varanasi -1 as per TS & Approved Drawings.
-
-
-
Supply & Erection of PCC Pole 8.5 mtr long
4142
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 mtr PCC pole Pole of .As per TS.
4142
-
-
Supply & Erection of stone pad (300x300x75mm)
4142
-
-
Supply & Erection of STP 9 mtr SP-33 (410 SP 33)
2900
-
-
Concreting of supports with Grounting of 0.3 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9 mtr stp pole Pole of depth 1.8 meter with 300 mm Muffing.As per TS.
2900
-
-
Supply & erection of Stay set 16x1800 sq mm (including stay rod , turn buckle,I bolt and anchor plate with Guy insulator)
1450
-
-
Supply & Erection of GI Earthing rod (20x2500)mm
7042
-
-
Supply & Erection of Stay wire 7/10 SWG
35
-
-
Supply of & Erection of G.I. wire 5 mm 6 swg
14.5
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
1450
-
-
Supply of LT A B Cable Size (3x50+1x35+1x16) sq mm with Bare Massenger ( Insulated Street Lighting )
128
-
-
Erection of LT A B Cable Size (3x50+1x35+1x16) sq mm with Bare Massenger ( Insulated Street Lighting )
122
-
-
Supply of LT A B Cable Size (3x95+1x70+1x16) sq mm with Bare Massenger ( Insulated Street Lighting )
89.3
-
-
Erectionof LT A B Cable Size (3x95+1x70+1x16) sq mm with Bare Massenger ( Insulated Street Lighting )
85
-
-
Supply of & Erection of Suspension clamp with eye hook
7042
-
-
Supply of & Erection of Dead end clamp insulated with I hook
1657
-
-
Supply of & Erection of HDG pole Clamp for I-Hook with N&B
25
-
-
Supply of & Erection of LT Insulation piercing connector 95-35 sqmm / 50-35 sqmm size
9321
-
-
Supply of & Erection of Three phase LT SMC Box with clamp
3107
-
-
Supply of & Erection of PG clamp for Neutral
3107
-
-
Supply of L T XLPE unarmoured Cable of size 4C x 35 sq mm
5
-
-
Erection of L T XLPE unarmoured Cable of size 4C x 35 sq mm
5
-
-
Supply of & Erection of pre insulated compression connector of size 95/50 Sqmm
300
-
-
Supply of & Erection of Stay clamp with N&B
1450
-
-
Extra Circuits 8.5 Mtr PCC LT Ckt. with AB Cable (3x50+1x35+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
Erection of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
125
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
125
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
1
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.67
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
50
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
50
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
50
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
50
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
250
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
113
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
100
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
150
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
120
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
50
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
125
-
-
Supply & Erection of LT Insulation piercing connector 50 -50 sqmm size for phase connection as per TS & approve drawing
45
-
-
Supply & Erection of LT Insulation piercing connector 50-35 sqmm size for phase connection as per TS & approve drawing
300
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
165
-
-
Extra Circuits 8.5 Mtr PCC LT Ckt. with AB Cable (3x95+1x70+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
Erection of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
125
-
-
Concreting of supports with Grounting f 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
125
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
1
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.45
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
50
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
50
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
50
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
50
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
250
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
45
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
100
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
150
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
120
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
50
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
125
-
-
Supply & Erection of LT Insulation piercing connector 95 -95 sqmm size for phase connection as per TS & approve drawing
45
-
-
Supply & Erection of LT Insulation piercing connector 95-35 sqmm size for phase connection as per TS & approve drawing
300
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
115
-
-
Extra Circuits 9 mtr STP Pole LT Ckt. with AB Cable (3x95+1x70+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
Erection of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
5
-
-
supply & Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 33 (IS 2713, Pt I, II, III 1980)
90
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
90
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
1
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.9
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
50
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
50
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
50
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
50
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
250
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
45
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
100
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
150
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
120
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
50
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
125
-
-
Supply & Erection of LT Insulation piercing connector 95 -95 sqmm size for phase connection as per TS & approve drawing
45
-
-
Supply & Erection of LT Insulation piercing connector 95-35 sqmm size for phase connection as per TS & approve drawing
300
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
115
-
-
Extra Circuit LT line with 8.5 Mtr/180 kgs PCC Poles with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
37
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
35
-
-
Supply & Erectionof 8.5 Mtr/180 kgs PCC Poles as per TS
875
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
875
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
4
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
350
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
350
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
350
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
350
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
1750
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
1750
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
315
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
473
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
840
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
350
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
875
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
315
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
945
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
420
-
-
Extra Circuit LT line with 9 mtr steel tubular pole with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
42
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
40
-
-
Supply & Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 33 (IS 2713, Pt I, II, III 1980)
1001
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
1001
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
5
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
401
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
401
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
401
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
401
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
2005
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
36
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
961
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
1442
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
961
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
401
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
1001
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
360
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
2883
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
1081
-
-
Extra Circuit LT line with 11 mtr steel tubular pole with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
35
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
33
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
835
-
-
Gruoting Of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
835
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
4
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
334
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
334
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
334
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
334
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
1670
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
301
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
668
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
1002
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
801
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
334
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
835
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
300
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
2004
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
768
-
-
Extra Circuit LT line with 11 mtr steel tubular pole with AB cable (3x150+1120+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
14
-
-
Erection of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
13
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
334
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
334
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
2
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
8
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
134
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
134
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
134
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
134
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
670
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
12
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
267
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
401
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
320
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
134
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
334
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
120
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
801
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
307
-
-
Extra Circuit LT line with 9 mtr steel tubular pole with AB cable (3x150+1x120+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
23
-
-
Erection of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
22
-
-
Supply & Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 33 (IS 2713, Pt I, II, III 1980)
556
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
556
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
3
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.82
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
223
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
223
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
223
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
223
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
1115
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
20
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
445
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
668
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
534
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
223
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
556
-
-
Supply & Erection of LT Insulation piercing connector 150 -150 sqmm size for phase connection as per TS & approve drawing
200
-
-
Supply & Erection of LT Insulation piercing connector 150-35 sqmm size for phase connection as per TS & approve drawing
1335
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
512
-
-
Extra Circuit LT line with 11 mtr steel tubular pole with AB cable (3x150+1x120+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
47
-
-
Erection of LT Aerial bunched XLPE cable 3X150 sqmm (Ph) + 1x120 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
45
-
-
11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
1113
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
1113
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
5
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
445
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
445
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
445
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
445
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
2225
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
40
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
890
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
1335
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
1068
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
445
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
1113
-
-
Supply & Erection of LT Insulation piercing connector 150 -150 sqmm size for phase connection as per TS & approve drawing
401
-
-
Supply & Erection of LT Insulation piercing connector 150-35 sqmm size for phase connection as per TS & approve drawing
2670
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
1469
-
-
Augmentation of LT line with 8.5 Mtr PCC Pole pole with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
1
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
1
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
6
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
6
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
0.62
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.06
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
6
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
6
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
6
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
6
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
30
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
5
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
9
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
14
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
22
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
9
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
9
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
6
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
27
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
11
-
-
Augmentation of LT line with 9 Mtr STP Pole pole with AB cable (3x120+1x95+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
68
-
-
Erection of LT Aerial bunched XLPE cable 3X120 sqmm (Ph) + 1x95 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
65
-
-
Supply & Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 33 (IS 2713, Pt I, II, III 1980)
652
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
652
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
8
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
15
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
652
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
652
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
652
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
652
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
3260
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
587
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
978
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
1467
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
2282
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
978
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
978
-
-
Supply & Erection of LT Insulation piercing connector 120 -120 sqmm size for phase connection as per TS & approve drawing
2
-
-
Supply & Erection of LT Insulation piercing connector 120-35 sqmm size for phase connection as per TS & approve drawing
2934
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
1174
-
-
Augmentation of LT line on 8.5 mtr PCC pole with AB cable (3x95+1x70+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
34
-
-
Erection of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
32
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
324
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
324
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
4
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
324
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
324
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
324
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
324
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
1620
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
292
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
486
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
729
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
1133
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
510
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
510
-
-
Supply & Erection of LT Insulation piercing connector 95 -95 sqmm size for phase connection as per TS & approve drawing
306
-
-
Supply & Erection of LT Insulation piercing connector 95-35 sqmm size for phase connection as per TS & approve drawing
2187
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
136
-
-
Augmentation of LT line on 9 Mtr STP pole with AB cable (3x95+1x70+1x16)
-
-
-
Supply of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
9
-
-
Erection of LT Aerial bunched XLPE cable 3X95 sqmm (Ph) + 1x70 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
8
-
-
Supply & Erection of 9 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 33 (IS 2713, Pt I, II, III 1980)
84
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
84
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
972
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
168
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
84
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
84
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
84
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
84
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
420
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
8
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
126
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
189
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
294
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
126
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
126
-
-
Supply & Erection of LT Insulation piercing connector 95 -95 sqmm size for phase connection as per TS & approve drawing
79
-
-
Supply & Erection of LT Insulation piercing connector 95-35 sqmm size for phase connection as per TS & approve drawing
378
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
152
-
-
Supply & Erection of Feeder Bifurcation ( 33KV line on 9 mtr PCC pole(Dog conductor)) as per approved drawings, technical specifications and scope of work
-
-
-
Supply of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
82.5
-
-
Erection of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
26.7
-
-
Supply & Erection 9m/400 kgs PCC Poles (PCC pole as per state practice)
481
-
-
Supply & Erection of Stone Pad 300x300x75 MM
481
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter .As per TS.
481
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
18
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
1.71
-
-
Supply & Erection of Barbed wire
962
-
-
Supply & Erection of Danger Board
481
-
-
Supply & Erection of Number Plate
454
-
-
Supply & Erection of Stay Set ( Galvanised) GI stay rod 20x1800 mm, stay wire 7/8 SWG GI wire, 50x8 mm stay clamp, stay insulator (2 nos.), anchor plate (300x300x8), nut bolts, 2 nos. turn buckles, 1.8 m long 20 mm dia. Solid GI Stay Rod, 7/4.0mm dia. GI stranded wire
160
-
-
Grouting of complete stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
160
-
-
Supply & Erection 33 KV polymer Disc insulator 70 KN B&S along with suitable hardware fittings
240
-
-
Supplt & Erection of 33 KV polymer Pin insulators with GI Pin & nuts
1362
-
-
Supply & Erection of GI earthing Spike earthing 20x2500 mm solid rod & 6 SWG earthwire with nut and bolt
160
-
-
Supply & Erection of 6 SWG GI wire,
144
-
-
Supply & Eection of 8 SWG GI wire
1282
-
-
Supply & Erection of Feeder Bifurcation (33KV line on 11 mtr steel tubular pole(Dog conductor)) as per approved drawings, technical specifications and scope of work
-
-
-
Supply of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
39.77
-
-
Erection of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
12.87
-
-
Supply & Erection of 11 m long steel tubular poles with welded steel base plate of designation 410 SP 55 (As per IS: 2713 , pt. I,II,III 1980)
231
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
231
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
8.75
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.82
-
-
Supply & Erection of Danger Board
219
-
-
Supply & Erection of barbed wire
462
-
-
Supply & Erection of Number Plate
219
-
-
Supply & Erection of Stay Set ( Galvanised) GI stay rod 20x1800 mm, stay wire 7/8 SWG GI wire, 50x8 mm stay clamp, stay insulator (2 nos.), anchor plate (300x300x8), nut bolts, 2 nos. turn buckles, 1.8 m long 20 mm dia. Solid GI Stay Rod, 7/4.0mm dia. GI stranded wire
77
-
-
Erection of complete stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
77
-
-
Supply & Erection of 33 KV polymer Disc insulator 70 KN B&S along with suitable hardware fittings
656
-
-
Supply & Erection of 33 KV polymer Pin insulators with GI Pin & nuts
116
-
-
Supply & Erection of GI earthing Spike earthing 20x2500 mm solid rod & 6 SWG earthwire with nut and bolt
77
-
-
Supply & Erection of 6 SWG Wire
69
-
-
Supply & Erection of 8 SWG GI wire,
618
-
-
Supply & Painting of silver paint
40
-
-
Supply & painting of red oxide paint
231
-
-
Supply & Erection of Feeder Bifurcation (33KV Line on 13 mtr steel tubular pole Dog conductor) as per approved drawings, technical specifications and scope of work
-
-
-
Supply of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
2.81
-
-
Erection of 6/4.72 + 7/1.57 mm (100 mm2 Al.area ) - Dog
0.91
-
-
Supply & Erection of 13 m long STP SP72
16
-
-
Supply & Erection of Stone Pad 300x300x75 MM
16
-
-
Concreting of poles as per specification
16
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
1
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.44
-
-
Supply & Erection of Danger Board
15
-
-
Supply & Erection of Barbed wire
32
-
-
Supply & Erection of Number Plate
15
-
-
Supply & Erection of Stay Set ( Galvanised) GI stay rod 20x1800 mm, stay wire 7/8 SWG GI wire, 50x8 mm stay clamp, stay insulator (2 nos.), anchor plate (300x300x8), nut bolts, 2 nos. turn buckles, 1.8 m long 20 mm dia. Solid GI Stay Rod, 7/4.0mm dia. GI stranded wire
5
-
-
Grouting of stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
5
-
-
Supply & Erection of 33 KV polymer Disc insulator 70 KN B&S along with suitable hardware fittings
8
-
-
Supply & Erection of 33 KV polymer Pin insulators with GI Pin & nuts
46
-
-
Supply & Erection of GI earthing Spike earthing 20x2500 mm solid rod & 6 SWG earthwire with nut and bolt
5
-
-
Supply & Erection of 6 SWG GI wire,
5
-
-
Supply & Erection of 8 SWG GI wire,
46
-
-
Supply & Painting of silver paint
16
-
-
Supply & Painting of red oxide paint
16
-
-
Supply & Erection of 33 KV Line underground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection, testing & commissioning of 33 kV LINE FOR UNDER GROUND RAILWAY CROSSING (300 Mtr) BY 2 Nos (INCLUDING ONE SPARE) 3Cx300 Sqmm XLPE Armoured Cable USING 150MM DIA GI PIPES (grade A for underground laying and grade B for pole support), OUTDOOR HEAT SHRINKABLE CABLE JOINTING KITS, LUGS, 4 Nos GI 3-Meters LONG pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
1
-
-
Supply & Erection for Feeder Bifurcation of 3 phase 11 kV line on 8.5 mtr PCC pole (Weasel conductor) using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel conductor
230.21
-
-
Erection of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel conductor
74.5
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
1341
-
-
Grouting of 8.5 PCC pole using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications: (state practices of PCC pole and base plate/stone to be used)
1341
-
-
Supply & Erection of Stone Pad (300x300x75mm)
1341
-
-
Supply & Erection for New 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
51
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.37
-
-
Supply & Erection of 11 KV danger board
1267
-
-
Supply & Erection of GI Barbed wire 12 SWG
2682
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
671
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
3800
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
447
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
447
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
447
-
-
Supply & Erection of 6 SWG GI wire
402
-
-
Supply & Erection of 8 SWG GI wire
3576
-
-
Supply & Erection of PG Clamp for Weasel to Weasel conductor
894
-
-
Supply & Erection of Aluminium Jointing sleave for ACSR Weasel
224
-
-
Supply & Erection for Feeder Bifurcation of 3 phase 11 kV line on 8.5 mtr PCC pole (Rabbit conductor)using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit conductor
17.61
-
-
Erection of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit conductor
5.7
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
103
-
-
Grouting of 8.5 PCC pole using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications: (state practices of PCC pole and base plate/stone to be used)
103
-
-
Supply & Erection of Stone Pad (300x300x75mm)
103
-
-
Supply & Erection for New 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
3.88
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.02
-
-
Supply & Erection of 11 KV danger board
291
-
-
Supply & Erection of GI Barbed wire 12 SWG
206
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
51
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
34
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
34
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
34
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
34
-
-
Supply & Erection of 6 SWG GI wire
31
-
-
Supply & Erection of 8 SWG GI wire
274
-
-
Supply & Erection of PG Clamp for Rabbit to Rabbit conductor
68
-
-
Supply & Erection of Aluminium Jointing sleave for ACSR Rabbit
17
-
-
Supply & Erection for Feeder Bifurcation of 3 phase 11 kV line on 8.5 mtr PCC pole (Dog conductor) using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
7
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
2.15
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
39
-
-
Grouting of 8.5 PCC pole using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) 0.268 cum. etc as per scope of work, approved drawings and specifications: (state practices of PCC pole and base plate/stone to be used,)
39
-
-
Supply & Erection of Stone Pad (300x300x75mm)
38.7
-
-
Supply & Erection for new 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
1.46
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.01
-
-
Supply & Erection of 11 KV danger board
37
-
-
Supply & Erection of GI Barbed wire 12 SWG
78
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
19
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
110
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
13
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
13
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
13
-
-
Supply & Erection of 6 SWG GI wire
12
-
-
Supply & Erection of 8 SWG GI wire
103
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
26
-
-
Supply & Erection of Aluminium Jointing sleave for ACSR DOG
6
-
-
Supply & Erection for Feeder Bifurcation of 3 phase 11 kV line on 11 mtr STP (Dog conductor) using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
58.09
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog conductor
18.8
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
338
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
338
-
-
Supply & Erectio of Stone Pad (300x300x75mm)
338
-
-
Supply & Erection for new 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
12.78
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.05
-
-
Supply & Erection of 11 KV danger board
319
-
-
Supply & Erection of GI Barbed wire 12 SWG
38
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
169
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
959
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
113
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
113
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
113
-
-
Supply & Erection of 6 SWG GI wire
102
-
-
Supply & Erection of 8 SWG GI wire
902
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
226
-
-
Supply & Erection of Aluminium Jointing sleave for ACSR DOG
56
-
-
Supply & Erection of 11 KV Line underground railway crossing ensuring statutory clearances as required as per technical specification, approved drawings and scope of work
-
-
-
Supply & Erection for 11 KV line under ground Railway crossing with 2 nos (Including one spare) 3Cx185 Sqmm XLPE Armored Cable (0.3 km each) using 150mm dia GI pipes (grade A for underground laying and grade B for pole support), Outdoor heat shrinkable cable jointing kit, 11 KV LIGHTENING ARRESTOR STATION CLASS 10KA (6 NOS.), LUGS, 4 Nos GI 3-Meters LONG pipe EARTHING, 6 SWG GI WIRES, CABLE MARKERS, BI METALLICK CLAMPS and JUMPERING etc AS REQUIRED AS PER TECHNICAL SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.
1
-
-
Supply & Erection of 12 KV 3ph Indoor type switch gear and 11 KV XLPE cable as per technical specifications, approved drawings and scope of works:
-
-
-
Supply & Erection of Indoor type 12 KV 3 Ph 1250 A VCB with control and protection system for out going feeder consisting of CT, A-meter, volt-meter, Relays, compliant & accessories complete as per specifications for feeder breaker
7
-
-
Supply & Laying of Cable AL 3X185 sqmm XLPE 11 KV
420
-
-
Supply & Erection of 11 KV cable jointing kit indoor 185 sq.mm.
7
-
-
Supply & Erection of 11 KV cable jointing kit outdoor 185 sq.mm.
7
-
-
Control Cable
-
-
-
Supply & Laying of 4x2.5 mm sq
210
-
-
Supply & Laying of 2x2.5mm sq
210
-
-
Supply & Erection of 11KV Agriculture Feeder Splitting LT line on 8.5 mtr PCC pole with AB cable (3x50+1x35+1x16) due to overloading as per approved drawings, technical specifications and scope of work
-
-
-
Supply of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
23
-
-
Erection of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)
22
-
-
Supply & Erection of 8.5 Mtr/180 kgs PCC Poles as per TS
550
-
-
Concreting of supports with Grounting of 0.268 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 8.5 Mtr PCC Pole of depth 1.4 meter.As per TS.
550
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.
3
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
0.84
-
-
Supply & Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.
220
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
220
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
220
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
220
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set
1100
-
-
Supply & Erection of 8 SWG GI wire for earthing as per TS
495
-
-
Supply & Erection of Three phase SMC Distribution box with clamps
440
-
-
Supply & Erection of 4X35 mm^2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk
660
-
-
Supply & Erection of Suspension clamp for LT Aerial Bunched Cable as per TS
554
-
-
Supply & Erection of Tension /dead end clamps for LT Aerial Bunched Cable as per TS
220
-
-
Supply & Erection of 35 Sqmm PG Clamps as per TS
550
-
-
Supply & Erection of LT Insulation piercing connector 50 -50 sqmm size for phase connection as per TS & approve drawing
198
-
-
Supply & Erection of LT Insulation piercing connector 50-35 sqmm size for phase connection as per TS & approve drawing
1320
-
-
Supply & Erection of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS
726
-
-
New Distribution Transformer 25 KVA 11/433 KV - Supply
-
-
-
Supply & Erection of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
250
-
-
Grouting of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
250
-
-
Supply & Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.
29
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers as per TS
1
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators
375
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator as per TS.
375
-
-
Supply & Erection of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.
375
-
-
Supply & Erection of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS
250
-
-
Stay Set Grouting 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.
68
-
-
Supply & Erection of stay guy insulator (1 Nos.), as per TS
250
-
-
Supply & Erection of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set
1375
-
-
Supply & Erection of 6 SWG GI wire for earthing as per TS
500
-
-
Supply & Erection of Barbed GI wire 12 SWG
500
-
-
Supply & Erection of PG Clamp suitable for ACSR Rabbit conductor as per TS
375
-
-
Supply & Erection of 11 KV danger board
125
-
-
Supply & Erection of 11 KV, 3-Pole, 3-Ph, 400A, TPMO as per TS
125
-
-
Supply Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS
125
-
-
Supply & Erection of 3-Phase, 11/0.4 kV, 25KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS . Energy Efficiency Level-1
125
-
-
Supply & Erection of LT Distribution box with suitable rating MCCB for incomer & MCCB for two no outgoing feeder suitable for 25 kVA, Dist1ibution Transformer alongwith suitable for pole mounting as per TS
125
-
-
Supply & Erectionof 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)
125
-
-
Supply & Erection of Earthing of pole by MS earthing rod of 20x2500mm .
250
-
-
Supply & Erection of Earthing Arrangement of chemical pipe size of 40x3000 mm.
125
-
-
Supply & Erection of 1-Core 70 mm2, Al. LT XLPE Cable as per TS
3750
-
-
Supply & Erection for Augmentation / Reconductoring of 33 kV line With ACSR Panther Conductor of 3 phase 33 kV line using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings
-
-
-
Supply of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther conductor
9.58
-
-
Erection of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther conductor
3.1
-
-
Supply & Erection of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)
9
-
-
Grouting of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)
9
-
-
Supply & Erection of 9 m PCC Poles - (PCC Pole as per state practice)
9
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr PCC Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
9
-
-
Supply & Erection New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
0.36
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.02
-
-
Supply & Erection of 33 KV danger board
53
-
-
Supply & Erection of GI Barbed wire 12 SWG
18
-
-
Supply & Erection of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings
19
-
-
Supply & Erection of 33 KV 10 KN Polymer Pin Insulators
149
-
-
Supply & Erection of 8 SWG GI Coil 115 turns (1.85 Kg)
9
-
-
Supply & Erection of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 nos. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
9
-
-
Erection of complete stay set with 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
9
-
-
Supply & Erection of 6 SWG GI wire
0.5
-
-
Supply & Erection of 8 SWG GI wire
0.5
-
-
Supply & Erection of PG Clamp for Panther to panther conductor
36
-
-
Supply & Painting of silver paint
9
-
-
Supply & Painting of red oxide paint
9
-
-
Dismantling of existing overhead line conductor and fittings, depositing the dismantled material to employer's store .
3
-
-
Supply & Erection of Augmentation / Reconductoring of 11KV line With ACSR DOG Conductorof Feeder ( Older than 25 years ) as per approved drawings, technical specifications and scope of work
-
-
-
Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor on 11 Mtr STP
713.79
-
-
Erection of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor on 11 Mtr STP
231
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
1155
-
-
Erection of 8.5 PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used) 0.268 cum Cement concreting+0.014 cmt (Muffing)
1155
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
34.65
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
2.31
-
-
Supply & Erection of 11 KV danger board
1155
-
-
Supply & Erection of Stone Pad (300x300x75mm)
1155
-
-
Supply & Erection of GI Barbed wire 12 SWG
2310
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
1386
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
6930
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
1155
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
693
-
-
Erection of complete stay set with 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
693
-
-
Supply & Erection of 6 SWG GI wire
4.62
-
-
Supply & Erection of 8 SWG GI wire
2.31
-
-
Supply & Erection of PG Clamp for Dog to Dog conductor
1386
-
-
Supply & Erection of Augmentation / Reconductoring of 11KV line With ACSR Rabbit Conductor of Feeder ( Older than 25 years ) as per approved drawings, technical specifications and scope of work
-
-
-
Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor- On 11 mtr STP
260.49
-
-
Erection of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor- On 11 mtr STP
84.3
-
-
Supply & Erection of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)
422
-
-
Erection of 8.5 PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used) 0.268 cum Cement concreting+0.014 cmt (Muffing)
422
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.
12.65
-
-
Supply & Erection of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.
0.84
-
-
Supply & Erection of 11 KV danger board
422
-
-
Supply & Erection of Stone Pad (300x300x75mm)
422
-
-
Supply & Erection of GI Barbed wire 12 SWG
844
-
-
Supply & Erection of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings
506
-
-
Supply & Erection of 11 KV 5 KN Polymer Pin Insulators with suitable hardware fittings
2529
-
-
Supply & Erection of GI Earthing spike made of 20x2500mm solid Rod
422
-
-
Supply & Erection for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
253
-
-
Erection of complete stay set with 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
253
-
-
Supply & Erection of 6 SWG GI wire
1.69
-
-
Supply & Erection of 8 SWG GI wire
0.84
-
-
Supply & Erection of PG Clamp for Rabbit to Rabbit conductor
505
-
-
Supply & Erection of Automatic Capacitor Bank as per approved drawings, technical specifications and scope of work (1.98 MVAr With APFC Panel)
-
-
-
Supply & Erection of 12.65 kV, 1980 kVAr, 3-Phase, 50 C/s, housed in Outdoor Type CRCA panel , Capacitor bank having two variable step of 792 Kvar & one Variable steps of 396 kVAr. Bank shall be complete with Capacitor units of 264/132 kVAr,Aluminium busbars, Epoxy insulators, HT HRC fuse,Surge suppressor etc.with details as follows-(1 )11 KV Alumunium wound ,Dry type series reactor(a)0.528 KVAr for 792 KVAr step-6 nos. (b)0.264 KVAr for 396 kVAr step-3 nos. (2) 11 kV, 3-Phase Indoor Dry Type RVT-1 nos. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor-3 nos. (4) Indoor Type Automatic Control Unit-1 No. (5) IP 55, outdoor CRCA cubicle panel for accommodating capacitors, series reactors, vacuum contactor, surge supressor etc., along with FRP canopy-1 No.
21
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(1.98 MVAr HT Capacitor bank)
63
-
-
Supply & Erection of Indoor Type Automatic Control Unit(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(1.98 MVAr HT Capacitor bank)
315
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erectio of 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(1.98 MVAr HT Capacitor bank)
21
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(1.98 MVAr HT Capacitor bank)
42
-
-
Casting of Civil foundation(1.98 MVAr HT Capacitor bank)
21
-
-
Cable trench for laying of power/control cables.(1.98 MVAr HT Capacitor bank)
105
-
-
Supply & Erection of 3.96 MVAr With APFC Panel
-
-
-
Supply & Erection12.65 kV, 3960 kVAr, 3-Phase, 50 C/s housed in Outdoor Type CRCA Panel, Capacitor bank having two variable step of 792 Kvar& two Variable steps of 1188 kVAr. Bank shall be complete with Capacitor units of 396/264 kVAr, Aluminium busbars, Epoxy insulators, HT HRC fuse, Surge Suppressor etc.with details as follows-(1) 11 kV, Aluminium Wound, Dry type Series reactors a) 0.528 kVAr for 792 kVArstep - 6 Nos. , b) 0.792 kVAr for 1188 kVAr step - 6 Nos. (2) 11 kV, 3-Phase Dry Type RVT - 1 No. (3) 12 kV 3 Phase Indoor type metal enclosed Vacuum Contactor - 4 Nos. (4) Indoor Type Automatic Control Unit - 1 No.(5) IP 55 , Outdoor CRCA cubicle Panel for accommodating capacitors, Series Reactor, Vacuum contactor, Surge Suppressor etc., along with FRP Canopy- 1 set
19
-
-
Supply & Erection of 11 kV, 400 Amp, Off Load Isolator with earth switch and mounting structure.(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of 9 kV, 10 kA,Station Class, Lightning Arrestors(3.96 MVAr HT Capacitor bank)
57
-
-
Supply & Erection of Indoor Type Automatic Control Unit(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of IP 55 , Outdoor CRCA cubicle Panel for accomdating capacitors,Series Reactor,Vacuum contactor,Surge arrestor,Fuses(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of Control cables, lugs/thimble, Junction Box etc.(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Laying of 11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable(3.96 MVAr HT Capacitor bank)
285
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Indoor(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of 11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of 11 KV VCB Switchgear with complete arangement for connection with existing 11 KV bus bar.(3.96 MVAr HT Capacitor bank)
19
-
-
Supply & Erection of Earthing for Panel and LA's by pipe in pipe earthing(3.96 MVAr HT Capacitor bank)
38
-
-
Casting of Civil foundation(3.96 MVAr HT Capacitor bank)
19
-
-
Cable trench for laying of power/control cables.(3.96 MVAr HT Capacitor bank)
95
-
-
Supply & Erection of Earthing of existing substation and Distribution Transformer
-
-
-
Supply & Erection of Pipe rod earthing with 3000mm long, 40 mm diameter GI pipe, GI Strip of 24x3mm.
766
-
-
Supply & Erection of Spike Earthing 20mm X 2500 mm GI solid Rod
6427
-
-
Supply & Erection of 8 SWG GI wire for earthing
14.39
-
-
Supply ,Erection,Design & Engineering of Renovation and Modernization of Existing Substation, Battery Charger and Battery set
-
-
-
Supply & Erection of 24V, 150 AH Pb(Lead) Acid battery, battery stand made of teak wood duly painted with anti acid resistive paint, battery insulators, inter-battery wiring using 30 sqm, 1.1 kv, copper single core multi strand cable, terminal connectors, Rubber mats & all other accessories and connectors as per technical specifications.
38
-
-
Supply & Erection of 24V, 150 AH. Float-cum-Boost Battery Charger with full wave rectification for 230 V, 1 phase, 50 Hz AC Input Supply & Erection as per technical specifications.
38
-
-
Supply & Erection of36kV, 1250A, 25kA for 3 seconds, 3-ph, Outdoor type Vacuum Circuit breaker with marshalling box etc Complete in all respect along with support structure.
71
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 400-200/1-1 Amps ( having 3 secondery, core), type Current Transformers along with junction box (1 no junction box for 3 no of 1- phase CTs), as required as per technical specifications complete in all respect.
45
-
-
Supply & Erection of 36kV, 1-Phase, 25kA/3 seconds, 33 Kv/110 V single core outdoor type Potential Transformers along with junction box, as required as per technical specifications complete in all respect.
45
-
-
Supply & Erection of 30 kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 set= 3 Nos.)
26
-
-
Supply & Erectio of 36kV, 800A, 25kA , 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per Technical Specifications. (with Earth Switch)
59
-
-
Supply & Erection of 33 kV feeder Panel (without diffirential relays) complete
123
-
-
Supply & Erection of 12 KV 3 Ph 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 25kA, 400-200/5-5 A, 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection and required accessories, A-meter, Numerical Relay & accessories complete as per specifications for feeder breaker protection & Protection for Earth fault and over current) with extensible arrangement for future
62
-
-
Supply & Erection of 11 KV 400-200/5-5 AMP moulded CT
425
-
-
Supply & Erection of Indoor Type 11KV/110/√3 V 3-Phase PT for Indoor Type Control & Relay panel
45
-
-
Supply & Erection of 9kV, 10kA, 1-ph Station Class Lightening Arrester complete (1 Set = 3 Nos.)
797
-
-
Suplly & Erection of 11KV TPMO switch with fixing clamps,chanel & Nut & bolt.
61
-
-
Supply & Erection of 11 kv Bus-Coupler with all required accessories complete as per technical specifications, scope of works and approved drawings .
45
-
-
Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable
0.11
-
-
Erection of 3CX300 Sqmm 33 KV XLPE Armored Cable
0.1
-
-
Supply of 3Cx185 Sqmm 11 KV XLPE Armored Cable
4
-
-
Erection of 3Cx185 Sqmm 11 KV XLPE Armored Cable
3
-
-
Civil Works for Control room extension, Strengthning and Miscellaneous Works required as per Scope of work, Approved drawings and Technical Specifications.
-
-
-
Design, Engineering construction of Control room building extension 300 Sq feet for installation of Capacitor Bank pannel, including cost of all materials, T&P and Labour, etc. as per Technical specification and approved drawing as per direction of Employer
4
-
-
Design, Engineering construction of Control room building extension 300 Sq feet for installation of pannels for additional T/F, including cost of all materials, T&P and Labour, etc. as per Technical specification and approved drawing as per direction of Employer
3
-
-
Design, Engineering construction of Control room building extension 300 Sq feet for installation of pannels for Augmentation of T/F, including cost of all materials, T&P and Labour, etc. as per Technical specification and approved drawing as per direction of Employer
1
-
-
Old Conrol Room Building Strengthning & Miscellaneous Construction Works required as per Scope of work, Approved Drawings and Technical Specifications
4
-
-
Construction of boundary wall (200 mtr for each substation) as per Scope of work, approved drawings and Technical specifications.
5
-
-
Construction of fire wall between two Power Transformes at Existing 33/11 KV S/S as per Scope of work, approved drawings and Technical specifications.
4
-
-
Supply & Erection of DT Capacitor with Fitting as per Technical Specification, Approved Drawing and scope of work
-
-
-
Supply & Erection of LT Shunt capacitor 440 Volt 10 KVAr 3Phase 50Hz IP65
205
-
-
Supply & Erection of LT Shunt capacitor 440 Volt 25 KVAr 3Phase 50Hz IP65
608
-
-
LT Line with 1CX25 sqmm LT armoured XLPE Cable in high loss area
-
-
-
Supply & Erection of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
147
-
-
Supply & Erection of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 31
118
-
-
Grouting of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
147
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
118
-
-
Supply & Erection of Pole accessories as per technical specification, approved drawing and scope of work
-
-
-
Supply & Erection of Stone Pad 300X300X75
147
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
118
-
-
Erection of complete stay set with 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
118
-
-
Supply & Erection of Single core XLPE armoured cable single phase 2 wire as per technical specifications, approved drawings and scope of work.
-
-
-
Supply & Erectio of 1.1 kV Single Core 25sqmm XLPE armoured cable (1Cx25 sqmm)
31
-
-
Supply & Erection of Angle for vertical Arm L50x50x6 (Type -A)-900MM
568
-
-
Supply & Erection Angle for vertical Arm L50x50x6 (Type -B)- 900MM
166.94
-
-
Supply & Erection of C-Clamp with Nut & bolts
2674
-
-
Supply & Erection of LT shakle insulator
2674
-
-
Supply & Erection of Distribution tie for shakle insulator
2674
-
-
Supply & Erection of Mid span joint 25sqmm
59
-
-
Supply & Erection of Insulation mastic tape (2inc X 10 feet).
310
-
-
Supply & Erection of Satellite Multi-Tap Connector as per TS
1085
-
-
Supply & Erection of Single Phase SMC Distribution Box with clamps
735
-
-
Supply & Erection of 2Cx25 SQMM Stranded Unarmoured Cable (Al Conductor ) for charging Single Phase DB
1
-
-
Supply & Erection of Spike Earthing 20mm X 2500 mm GI solid Rod
294
-
-
Supply & Erection of 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers
441
-
-
Supply & Erection of LT insulation Piercing Connectors of 16-150 sqmm size for energizing distibution Kiosk/box
735
-
-
Supply & Painting of silver paint
118
-
-
Supply & Painting of red oxide paint
118
-
-
Removing and shifting of Existing Material to client store
31
-
-
LT Line with 1CX120 sqmm LT XLPE Armoured Cable in high loss area
-
-
-
Supply & Erection of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
196
-
-
Supply & Erection of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 31
157
-
-
Grouting of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
196
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
157
-
-
Supply & Erection of Pole accessories as per technical specification, approved drawing and scope of work
-
-
-
Supply & Erection of Stone Pad 300X300X75
196
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
157
-
-
Grouting stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
157
-
-
Supply & Erection of Single core XLPE armoured cable for three pahse 4 wire as per technical specifications, approved drawings and scope of work.
-
-
-
Supply & Erection of 1.1 kV Single Core 120sqmm XLPE armoured cable (1Cx120 sqmm)
41
-
-
Supply & Erection of LT cross arm arrangement angel (50x50x6mm) (50x8mm) (weight-9.41 kg) with Nuts and bolts
757
-
-
Supply & Erection of LT cross arm arrangement angel (75x75x8mm) (65x8mm) (weight-18.6 kg) with Nuts and bolts
222.6
-
-
Supply & Erection of C-Clamp with Nut & bolts
3566
-
-
Supply & Erection of LT shakle insulator
3566
-
-
Supply & Erection of Distribution tie for shakle insulator
3566
-
-
Supply & Erection of Mid span joint 120sqmm
79
-
-
Supply & Erection of Insulation mastic tape (2inc X 10 feet).
410
-
-
Supply & Erection of Satellite Multi-Tap Connector as per TS
1435
-
-
Supply & Erection of Three Phase SMC Distribution Box with clamps
980
-
-
Suppply & Erection of 4Cx35 SQMM Stranded Unarmoured Cable (Al Conductor ) for charging Three Phase DB
2
-
-
Supply & Erection of Spike Earthing 20mm X 2500 mm GI solid Rod
392
-
-
Supply & Erection of 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers
588
-
-
Supply & Erection of LT insulation Piercing Connectors of 16-150 sqmm size for energizing distibution Kiosk/box
2940
-
-
Supply & Painting of silver paint
157
-
-
Supply & Painting of red oxide paint
157
-
-
Removing and shifting of Existing Material to client store
41
-
-
LT Line with 1CX95 sqmm XLPE Armoured Cable in high loss area
-
-
-
Supply & Erection of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
274
-
-
Supply & Erection of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 31
219
-
-
Grouting of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
274
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
219
-
-
Supply & Erection of Pole accessories as per technical specification, approved drawing and scope of work
-
-
-
Supply & Erection of Stone Pad 300X300X75
274
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
219
-
-
Grouting stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
219
-
-
Supply & Erection of Single core XLPE armoured cable for three phase 4 wire as per technical specifications, approved drawings and scope of work.
-
-
-
Supply & Erectionof 1.1 kV Single Core 95sqmm XLPE armoured cable (1Cx95 sqmm)
58
-
-
Suppl & Erection of LT cross arm arrangement angel (50x50x6mm) (50x8mm) (weight-9.41 kg) with Nuts and bolts
1060
-
-
Supply & Erection of LT cross arm arrangement angel (75x75x8mm) (65x8mm) (weight-18.6 kg) with Nuts and bolts
311.66
-
-
Supply & Erection of C-Clamp with Nut & bolts
4993
-
-
Supply & Erection of LT shakle insulator
4993
-
-
Supply & Erection of Distribution tie for shakle insulator
4993
-
-
Supply & Erection of Mid span joint 95sqmm
110
-
-
Supply & Erection of Insulation mastic tape (2inc X 10 feet).
580
-
-
Supply & Erection of Satellite Multi-Tap Connector as per TS
2030
-
-
Supply & Eection of Three Phase SMC Distribution Box with clamps
1372
-
-
Suppply of 4Cx35 SQMM Stranded Unarmoured Cable (Al Conductor ) for charging Three Phase DB
3
-
-
Supply & Erection of Spike Earthing 20mm X 2500 mm GI solid Rod
549
-
-
Supply & Erection of 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers
823
-
-
Supply & Erection of LT insulation Piercing Connectors of 16-150 sqmm size for energizing distibution Kiosk/box
4116
-
-
Supply & Painting of silver paint
219
-
-
Supply & Painting of red oxide paint
219
-
-
Removing and shifting of Existing Material to client store
58
-
-
LT Line with 1CX50 sqmm XLPE Armoured Cable in high loss area
-
-
-
Supply & Erection of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)
245
-
-
Supply & Erection of 9 M long steel Tubular poles with welded steel base plate of Designation 410 SP 31
196
-
-
Grouting of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)
245
-
-
Concreting of supports with Grounting of 0.294 cum (1:2:4,1-cement, 2-coarse sand,4-concerate of 20mm Size) of 9mtr mtr STP Pole of depth 1.5 meter with 300 mm Muffing.As per TS.
196
-
-
Supply & Erection of Pole accessories as per technical specification, approved drawing and scope of work
-
-
-
Supply & Erection of Stone Pad 300X300X75
245
-
-
Supply & Erection of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.
196
-
-
Grouting of stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 no.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.
196
-
-
Supply & Erection of Single core XLPE armoured cable for three pahse 4 wire as per technical specifications, approved drawings and scope of work.
-
-
-
Supply & Erection of 1.1 kV Single Core 50sqmm XLPE armoured cable (1Cx50 sqmm)
51
-
-
Supply & Erection of LT cross arm arrangement angel (50x50x6mm) (50x8mm) (weight-9.41 kg) with Nuts and bolts
946
-
-
Supply & Erection of LT cross arm arrangement angel (75x75x8mm) (65x8mm) (weight-18.6 kg) with Nuts and bolts
278
-
-
Supply & erection of C-Clamp with Nut & bolts
4458
-
-
Supply & Erection of LT shakle insulator
4458
-
-
Supply & Erection of Distribution tie for shakle insulator
4458
-
-
Supply & Erection of Mid span joint 50sqmm
98
-
-
Supply & Erection of Insulation mastic tape (2inc X 10 feet).
510
-
-
Supply & Erection of Satellite Multi-Tap Connector as per TS
1785
-
-
Supply & Erection of Three Phase SMC Distribution Box with clamps
1225
-
-
Suppply & Erection of 4Cx35 SQMM Stranded Unarmoured Cable (Al Conductor ) for charging Three Phase DB
2
-
-
Supply & Erection of Spike Earthing 20mm X 2500 mm GI solid Rod
490
-
-
Supply & Erection of 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers
735
-
-
Supply & Erection of LT insulation Piercing Connectors of 16-150 sqmm size for energizing distibution Kiosk/box
3675
-
-
Supply & Painting of silver paint
196
-
-
Supply & Painting of red oxide paint
196
-
-
Removing and shifting of Existing Material to client store
51
-
-
Discount offered in %
-
-
-
Words Final Quoted Price after Discount
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements