Purvanchal Vidyut Vitaran Nigam Limited Tender

Clamp for Channel

Nut & Bolt various size

G.I. Pipe Dia 8"

G.I. Pipe Dia 6"

Danger Board with Clamp

Number Plate

G.i. Barbed wire

Alluminium paint

Alluminium binding wire 6 SWG

Red Oxcide paint

Alluminium Tape

Clamp with Nut & Bolt

Stone Pad

P.G. Clamp

Carriage of Material from Naini store center to work site.

11 Mtr. STP Pole

ACSR Weasel Conductor

ACSR DOG Conductor

Control Cable 4X2.5 sqmm

400 KVA Copper Wound Transformer

11 KV VCB for O/G Ctr 200/100/5A. 350 MVA

11 KV XLPE Cable 3X185 sqmm

11 KV XLPE Cable 3X120 sqmm

Cable Jointing Kit 3X185 sqmm Outdoor

Cable Jointing Kit 3X185 sqmm Indoor

11 KV Bus Coupler

Cable Jointing Kit 3X120 sqmm XLPE Cable Indoor & Outdoor

11 KV Pilfer Proof Matering Cabicle Box

11 KV CVT for Double Pole Matering

11 KV Line, 11 KV VCB at related material M.S Angle Cross Arm, M.S Angle, Dopper, Top, T-Off, Disk Insulator, Disk fitting, Pin Insulator, Stay Rod, Stay Wire Earthing Rod, Earthing Wire and others accessories.

ERECTION OF 11 KV LINE & INSTALLATION OF 11 KV VCB. PANEL AND OTHER WORKS.

Erection of Double pole for placing 11mtr Long ST Pole including Grouting (As per RESPO Standard) (Grauting work in all material provided by contractor).

Erection of Single pole for placing 11 mtr Long ST Pole including Grouting. (Grauting work in all material provided by contractor).

The work of Earthing all the poles installed in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon.

Stay complete, grouting and Nuzzling work in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon.

The work of sagging, binding, and jumpring by pulling weasel wire on the poles for Erection of 11 KV H.T. Line in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon.

Work of laying 11 KV XLPE Cable 3X185 sqmm double circuit underground cable (by HDD Method) from the proposed feeder to the double pole in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon.

Work of laying single circuit underground cable 11 KV XLPE Cable 3X185 from Bhavapur to Badaiya Puliya inside to Bhavapur Petrol Pump in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon.

Work of laying double circuit underground cable 11 KV XLPE Cable 3X185 from National Highway Crossing Prayagraj to Holagarh turn near Pratapgarh in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon. (By HDD Method)

Work of laying single circuit underground cable 11 KV XLPE Cable 3X120 from Double Pole CBT to Cubical Box (Main Meter) in Village-Malak Chaudhary for Food and medicinal laboratory building under power sub-station Soraon. (By Sand & Bricks Method)

Installation of 11 KV Jointing Kit Outdoor/Indoor Cable 3X120

Installation of 11 KV Jointing Kit Outdoor/Indoor Cable 3X185

Installation of 11 KV O/G VCB 200/100/5A panel at related S/s, earthing of Panel with GI Strip, Testing & Commissioning of VCB in all respects.

Installation of 11 KV Bus Coupler and Earthing work at Soraon Sub-Station for Food and medicinal laboratory building under power sub-station Soraon. (Earthing work related all provided by Contractor)

Making of Plinth of 400 KVA for transformer size 1.5x1.5x1.5mtr as per standard of UPPCL all material including Rail Loose/channel material shall be provided by Contractor.

Installation of Plinth of 400 KVA for transformer size 1.5x1.5x1.5mtr, Installation and energizing of transformer, connection to cable, earthing of the transformer's body and neutral (Earthing work related all provided by Contractor)

Earthing work along with installation of Cubical Meter and Double Pole CBT on the Premises for the Food and medicinal laboratory building under power sub-station Soraon. (Earthing work related all provided by Contractor)

Chemical Earthing of 11 kv VCB and T/F as per specification below (all material shall be provided by the contractor). (a) Earth Electrode copper coated earth rod of 3 meter long having diameter of 17.2mm with 200-250 micron copper coated MS rod shall be in situ cast in electrically conductive concrete earth enhancing mineral compound size of embedding of electrically conductive concrete earth enhancing mineral compund shall be 85mm dia the electrode should be able to with stand a fault current 35 KA - 45 KA (Peak) for 1 second duly tested from recognized National Test Laboratories like CPRI, ERDA ERTL MSME etc. (not more than 18 months old). eictrode along with clamp made of stainless still of gun metel for terminating cable/flat conductor. (b) Earth Enhancing mineral compound should have the following features:- 1- Ultra low resistivity. 2- Should be reaming effective for a very long period. 3- Should not corrode the embedded metal conductor of the electrode. 4- Including 7 mtrs aluminium strip of size 32x6 mm for connecting. 5- minimum of 25 kg earth enhancing mineral compound shall be provided in each earthing. (c) PCC Pit Earthing inspection/test link pit (round) with cover with PVC/HRP/carnet etc cover of at least 250 mm depth should be provided. Note:- 1- Test report of earth electrode from a recognize national test laboratories like CPRI, ERDA, ERTL, MSME etc. should be submitted as proof. 2- Test report of earth enhancing mineral compound for leaching and TCLP with NABL accredited Lab. 3- Testing shall be done in presence of JE in charge of the earth resistance if value found more than 1 ohm additional earth enhancing mineral compound shall be provided by contactor without any extra cost.

GST Extra as legally applicable