Public Works Department Tender

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. Ch-15 SI No-17

French spirit polishing : One or more coats on old workr including curing the cost of all material, labour, T&P etc. complete.Ch-15 SI No-14

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Red Sand stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.

Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings 110mm dia Ch-23 SI No-32(C)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Ch-12 SI No-11New

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. chp-23, item-8 16 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. chp-23, item-8 20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. chp-23, item-8 25 mm nominal outer dia pipes

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (c ) For 500 litres. Si No- 2c

Supplying & Fixing white vitreous china Extended wall hing water clost (European type W.C. pan) with seat and lid, C.P. brass hinges and rubbr buffers, 10litr low lwvel PVC flushing cistern with fittings, CI/MS brackets 40mm diameter flush bend with fitting and clamps, overflow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and bracketss, cutting and making good the walls and floors wherever required.

Supply & fixing of Parryware make Health Faucet Self Cleaning including all material and labour etc complete.E8371A1.

Providing and fixing of 15 mm nominal bore of C.P. brass bib cock of approved quality conforming to IS:8931. As per Chapter No. 23 SL 22. (Parryware Make-T5504A1).

Providing and fixing of 15 mm nominal bore of C.P. brass Long Body bib cock of approved quality conforming to IS:8931. As per Chapter No. 23 SL 22. (Parryware Make-T5506A1).

Providing and fixing of 15 mm nominal bore of C.P. brass Angle Valve of standard design and of approved make conforming to IS:8931. As per Chapter No. 23 SL 25 (Parryware Make-T5507A1).

Supply & fixing of Parryware make Towel ring including all material and labour etc complete. T6002A1.

Supplying & Fixing C.P. toilet paper holder Make Parryware T6005A1

Supply & Fixing of white glazed earthen ware Counter wash hand basin (46x46cm) hindware make (cat no.91018) with single hole for basin mixer of Jaquar make -Kubix(KUB-CHR-35023FB) with C.I. brackets, C.P. brass waste jali, P.V.C. waste pipe & connection etc. Including cost of all materials and labour.

Note - 1- Rates are inclusive of all taxes but excluding GST which shall be paid extra as applicable 2- Labour cess @ 1% will be deducted from contractor's bill at the time of payment