Public Works Department Tender

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

Construction of joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

Excavation in founadtion in ordinary soil and all as per dircection of E/I and as per sor SI No- 251 (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

P.C.C. Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 1:4:8 including supply of all materials labour and tools and plants etc. required for proper completion for the work. and all as per dircection of E/I and as per sor SI No- 281 (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. and all as per dircection of E/I and as per sor SI No- 303a (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of approved coarse sand. Minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work.and all as per dircection of E/I and as per sor SI No- 584(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

RCC grade M-30 Providing and laying Reinforced Cement Concrete in sub-structure as per drawing and techanical specification clauses 800 (Excluding cost of Reinforcement) For cover(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

Mild steel or tor iron work in R.C.C. for reinforcement and all as per dircection of E/I and as per sor SI No- 504 (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

Construction of Subgrade and Earthen Shoulders-Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits and leads, transporting to site, spreading, grading to required slopes and compacted to meet requirment of Table 300.2 with lead upto 4000m as per Technical Specification Clause 303.1 Including 3.00 km cartage earth (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)