Public Works Department Tender

Earth work in cutting or in embankment in Foundation in plinth ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 meter (20") in depth and earth work in embankment to be in 20 cm. (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.50 meter (5ft.) lifts and 30.00 m. (100 ft.) lead. The earth from cutting to be used in making embankment or to be deposided as spoil banks within 30.00 meters (100 ft.) distance as directed by the Engineer in Charge. with carted earth upto a distence of 3 Km.

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:4:8 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI No- 281

Cement concrete with 2cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:1½:3 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. As per SI 279(b)

Mild steel or iron work in heavy sizes such as trusses built up gates doors frames records racks roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also including supply of steel, bolts nut wasrage etc. and their fixing required for proper completion of the work in new item.

Supply of MS grill of a approved quality and drawing made of flat iron bigger then 20x4 mm size including supply of all materials, fabrication, labour, T&P and all taxes and also one coat red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site. (NEW ITEM-4)

Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in superstructure including nacessary cutting and moulding of bricks as requried and also including honey comb brick add for extra labour items, (301-308)

12mm thick plaster on brick work minimum thickness not less than 10mm with cement and find sand of 1.25 fineness modulus mortar in 1:6 As per SI No-586

4 cm (1½") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4") graded approved stone laid in panels finished with 3mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. S.I. No. 605

2cm (3/4") thick cement plaster in dado of skirting in 12 consisting of one part of cement and two parts of approved coarse sand laid in panels, finished with 3mm 1/8") flooating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (SI-597)

Providing and laying two coat JK wall putty on rough surfaces etc complete as per direction of engineer in charge

Finishing walls with water proof cement paint of approved make and quality on new work with thiree coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work. SI No 660

One priming coat and Thiree coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion.of work. SI No-649

Painting or Varnishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the SI no.-641

Supply and fixing 6mm (1/4") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work. S.I. No. 628

Providing and fixing PVC Nahani trap 75 mm dia (approved quality) complete including supply of all materials ,labourT&P etc. required for proper completion of the work SI-371

Providing and fixing 15 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)

As in Item No. 201 above but for 20 mm. dia. B-Class ISI marked G.I. Pipe.

As in Item No. 201 above but for 25 mm. dia. B-Class ISI marked G.I. Pipe.

Providing and fixing 550mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked (Hindustan, Neyer, Cera make) with RS or CI brackets painted white, 15 mm. dia. CP brass pillar cock with CP metal handle (weigth not less than 400 gms.) ISI marked and 32 mm. dia. CP brass chain with rubber plug, 32 mm. dia. CP brass waste standard pattern with check nut 32 mm. dia. CP brass P or S trap and unions complete with PVC connection 0.50 size including supply of all required materials, labour, T&P etc. required materials labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit, fittings used should be of superior quality. S.I. No.- 306

Providing and fixing flat back 465 mm. x 355 mm. x 265 mm. size lipped fron urinal basin of white glazed earthen ware 1st quality (Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with necessary fittings, RS or CI bracket standard size, 32 mm. dia. GI flush pipe "B" class with brass unions of fittings and GI waste pipe 25 mm. dia x 0.66 mm. complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern and fittings with approved paint, cutting and making good the wall and floors where required with cement sand and grit. S.I. No. 304

Providing and fixing first quality European type white glazed earthen ware ISI marked WC pan size 580 mm. (Hindustan, Ceta make) with 10 cm. PVC "P" trap of approved make with 10 litres low level flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with syphon, brass fitting and GI chain pull, RS or CI Brackets, 32 mm. dia. GI flush pipe "B" class (2 m.) with brass unions etc. 32 mm. dia. PVC bend 32 mm. dia. PVC socket, 15 mm. dia. overflow pipe with specials and masquito proof couplings of approved minicipal design, 15 mm. dia. brass stop cock (400 gms.) plastic connection (1.5" x 1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick C.C. in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete. S.I. No.- (301+314)

Providing and fixing first quality indian type white glazed earthen ware ISI marked WC pan size 580 mm. (Hindustan, Ceta make) with 10 cm. PVC "P" trap of approved make with 10 litres low level flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with syphon, brass fitting and GI chain pull, RS or CI Brackets, 32 mm. dia. GI flush pipe "B" class (2 m.) with brass unions etc. 32 mm. dia. PVC bend 32 mm. dia. PVC socket, 15 mm. dia. overflow pipe with specials and masquito proof couplings of approved minicipal design, 15 mm. dia. brass stop cock (400 gms.) plastic connection (1.5" x 1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick C.C. in proportion of 12:6:1 including supply of all materials labour, T&P etc. complete.

Providing and fixing plastic seat complete with plastic lid CP brass hinges and rubber buffer for European type WC complete including supply of all materials, labour, T&P etc. required for proper completion of work. S.I. No. 321

Supply and fixing C.P. brass stop cock heavy quality 15 mm. dia. ISI marked including cutting and threading the pipe, if required including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I. No. 245

Supply and fixing low density polythene tank sintex or equivalent. (500 ltr) S.I. No. - Chapt- IV New Item (Sl. No 36)

Providing and fixing 15 mm dia PVC ball float valve with brass rod and union complete ISI marked including supply of all materials, labour and T&P etc required for proper completion for the work. (S.I. No 219)

Fixing panes of glass with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials labour and tools & plants, etc. required for proper completion of the work but excluding cost of glass. (3mm thick) (Chapt.-19, SI No 812)

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I. No. 336

Supply and fixing of 40 mm thick commercial quality Sitapur ply or other approved plywood flush shutters including stops and including fixing and adjustment of hinges bolts, locks handles springs and /or other fitting but excluding their supply and includin painting with two coats of black Japan on all Iron fittings if necessary and including fixing the glass panes with putty and brad glass to be 4 mm thick fitting with necessary screw to be supplied depratmentally.SI No-470

Apprpoximate cost of and Alluminium fittings with screws for doors and windows etc. S.I. No. 472(a)

Fixing panes of glass with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials labour and tools &plants, etc. required for proper completion of the work but excluding cost of glass. SI No-812 (4 mm thick)

Supply and fixing 110 mm dia PVC Bend or Tee including supply of all material labour T&Petc. Required for proper completion of the work. as per direction of Engineer-in-Charge.(As market Rate)

Supply and fixing 110 mm dia PVC Pipe, Rain water pipes including supply of all material labour T&P etc. required for proper completion of the work. (as per Analysis rate.)