Public Works Department Tender

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing, laying, spreading and compacting graded stone aggregate to Stablized (3.5% Emulsion & 1% OPC cement) ETA specifications including premixing the material with at OMC in machenical mix plant carriage of mix material by tipper to site laying in uniform layers of each 100mm thick with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MORTH.406. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and applying Tack coat with bitumen emulsion medium setting using emulsion pressure distributor at the rate of 0.25 kg/sqm on the prepared bitumninous/granular surface cleaned with mechanical broom. Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H (Under DBM)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H

Providing & laying bitumen concrete with 60-90 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregate of specified grading premixed with bitumenious (VG-40) binder @ 5.4 % of mix and filler, transported the hot mix to work site.As per MoRT&H Specification 509 grading II (13 mm). Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H

RCC Grade M20 using batching plant transit mixer & manual placing. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC grade M15. Inclugind supply of all materials, labour, T&P etc. required for proper completion of the work. SOR No. 279b. Excluding GST as per direction of E/I

Mild Steel or iron work of reinforcement in raft,bed block,approach slabs, slabs, etc, wrought to required shape incl-uding cutting , bending & also including cost of necessary reinforcement for proper completion the work. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes..but Including cost of, all material,bitumen labour, T&P, royality , all taxes and labour cess complete. S.I No. 22.02 New Item. Excluding GST as per direction of E/I

Providing and laying of hot applied thermoplastic compound 15 mm thick for repeated bar marking including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.but Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I For Repeated bar .S.I No. 22.03 New Item

Retro-reflectorised Traffic sign as per IRC-67 2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-V vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. P xi) ii. 60 cm equllateral triangle with diffinitation plate (20cmx60cm) SI. No. 22.21. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Reflective raised pavement marker providing and Fixing of raised pavement marker (cat eye) type x-ASTMD -4956-04 avery dennision /3M (USA MAKE)having Moulded body of polycarbonate, ASA HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirements mentioned in MORT& H circular its reflective lens made of micro prismetic lens(capable of providing total internal reflection of light),electronically welded to the body the length , height and width of the body shall not exceed 130 mm, 20 mm and 105mm respectively, the area of each reflected surface shall not be less than 13 sqcm on each side stopping at the angle of 35+/-5 degree to the base to ensure maximum reflectively , it shall comply to specification of catagory A MORTH circular No. RW/NH/33023/10-97-DO III dt. 11.06.1997. lenses shall be moulded of methyl methecrylate confirming to ASTMD 788 or equvalent with 7 years warranty, S.I No. 22.06 New Item. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and fixing of 30 cm X90 cm Rectangular Hazard Marker retro-reflectorised sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60 S.I No. 22.29 New Item. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can beconcealed with thermoplastic body. The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mmabove the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steeI Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainI clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtainedfrom international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charg S.I No. 22.01 New Item. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I