Public Works Department Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search &amp; bid for etender UP.

Public Works Department - PWD Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date6 Aug 2024
Closing Date13 Aug 2024
Tender Amount₹ 3,05,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 1:4:8 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As per Si No-281Excluding GST

210

1018500

4850

... More
R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and footing excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.As per Si No-287 A Excluding GST

112

706720

6310

... More
R.C.C. M-25 Work with cement, approved coarse sand & 2 cm gauge approved stone grit in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. but in R.C.C. in 1:1½:3 (Column and T-Beam)As per Si No-289 Excluding GST

239

1864200

7800

... More
R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.Si no 284.a but for slabs in 1:1.5:3.As per Si No-284 A Excluding GST

233

1724200

7400

... More
M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.As per Si No-504 Excluding GST

963

7222500

7500

... More
M-150 Brick Work in in 1:4 (One cement & four Corse sand) mortar. in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work As per Si No- 305A Excluding GST

135

633150

4690

... More
(B) M-150 Brick Work in in 1:4 (One cement & four Corse sand) mortar in super structure l including supply of all materials labour, Tools & plants etc. required for proper completion of the work As per Si No-251 Excluding GST

345

1697400

4920

... More
2.50 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing compound (1 Ltr. to 1 bag of cement of 50 Kg.) as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary As per Si No-361 Excluding GST

77

24640

320

... More
Painting on DPC or over roof slab one coat of air blown bitumen 1 Kg/Sqm including cost of fuel wood other materials, labour T&P etc. required for proper completion of work As per Si No-362 Excluding GST

77

7700

100

... More
12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. As per Si No-582 Excluding GST

10410

1769700

170

... More
2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As per Si No-597 Excluding GST

40

9200

230

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. As per Si No4.17 DSR Excluding GST

93

50685

545

... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb As per Si No-10.14.1 DAR Excluding GST

341

144584

424

... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb As per Si No-10.14.3 DAR Excluding GST

518

238280

460

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding As per Si No-9.48.1 DAR Excluding GST

6568

1044312

159

... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 35 mm thick As per Si No-9.9.1.1 DSR Excluding GST

196

703640

3590

... More
Supply and fixing of 3.8 cm. (1½") thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally.As per Si No450 Excluding GST

86

259720

3020

... More
Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). As per Si No-9.7.7.1 DSR Excluding GST

200

320000

1600

... More
Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. As per Si No-9.104 DSR Excluding GST

244

28304

116

... More
Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300x16 mm As per Si No-9.96.1 DSR Excluding GST

42

9240

220

... More
Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250x16 mm As per Si No-9.96.2 DSR Excluding GST

24

4536

189

... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. As per Si No-9.83 DSR Excluding GST

12

9828

819

... More
Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:250x10 mm As per Si No-9.97.2 DSR Excluding GST

42

3486

83

... More
Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:200x10 mm As per Si No-9.97.3 DSR Excluding GST

12

864

72

... More
Providing and fixing bright finished brass handles with screws etc. complete:and fixing bright finished brass handles with screws etc. complete: 125 mm As per Si No-9.81.1 DSR Excluding GST

23

4278

186

... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.150 mm As per Si No-9.82 DSR Excluding GST

15

2550

170

... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per Si No-10.31 DSR Excluding GST

600

57000

95

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). As per Si No-10.28 DSR Excluding GST

664

373168

562

... More
Providing and applying of plaster of paris puty of 2mm thick over plastered surface i/c As per Si No-13.26 DSR Excluding GST

2067

394797

191

... More
Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats complete work As per Ch-15 New item no 4 Excluding GST

10410

697470

67

... More
Wall painting Two coat with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,including applying additional coats wherever required to achieve even shade and colour. As per Si No-13.83.2 DSR Excluding GST

10410

1072230

103

... More
Painting roofs or other iron work in large areas with one coat priming and on e coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials,labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked As per Si No-644+642 Excluding GST.

199

19701

99

... More
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample waterto remove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) As per Si No-13.116 DSR Excluding GST

547

1214340

2220

... More
Kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :As per Si No-11.26.1 DSR Excluding GST

1418

1985200

1400

... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. As per Si No-11.27 DSR Excluding GST

180

308520

1714

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red As per Si No-8.2.1 DSR Excluding GST

26

102466

3941

... More
Supply and fixing 6 mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. As per Si No-628 Excluding GST

720

648000

900

... More
Pdg. gola 75x75 mm in cement concrete 1:2:4 including finishing with cement mortar 1:3.: In 75x75mm deep chase As per Si No-12.21.1 DSR Excluding GST

149

33078

222

... More
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work. As per Ch-11 New Item Excluding GST

493

468350

950

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4---finishing the outlet complete. As per Si No-12.22 DSR Excluding GST

6

1302

217

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:.White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap .White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap As per Si No-21.16 Excluding GST

16

40000

2500

... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 As per Si No-19.32.1 SR Excluding GST

1

19558

19558

... More
Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge As per Si No-21.35 Excluding GST

16

3520

220

... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete.Semi rigid pipe 32 mm dia / 40 mm dia As per Si No-21.24 Excluding GST

16

1680

105

... More
Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms.) 15mm nominal bore. As per Si No-21.08 Excluding GST

16

9520

595

... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore As per Si No-21.07 Excluding GST

8

4200

525

... More
Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge. b) 20 mm nominal bore As per Si No-21.06 Excluding GST

16

4880

305

... More
Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in-charge. b) 20 mm nominal bore As per Si No-21.04 Excluding GST

10

2950

295

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 As per Si No-21.10 Excluding GST

32

15520

485

... More
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in-chargeAs per Si No-21.21 Excluding GST

7

3605

515

... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design.150x100 mm size p type with common burnt clay (non modular) bricks of class-150 As per Si No-21.31 Excluding GST

7

15050

2150

... More
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. As per Si No21b.29 Excluding GST

16

136000

8500

... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mmand 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per Si No-21.14Excluding GST

6

35700

5950

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. As per Si No-21.11 Excluding GST

2000

12500

6.25

... More
Supply and fixing of 10.0 cm.  PVC down pipe.(kissan/suprime make) make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1" x1/8") fixed to walls with cement motar (1:2) and including supply of 15 cm (6") long 6mm. (1/4") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. As per Si No-730AExcluding GST

96

35520

370

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin-Charge. External work. As per Si No 21.03 Excluding GST

100

186000

1860

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend As per Si No-12.42.5.2 DSR Excluding GST

8

872

109

... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mmAs per Si No-12.43.2 DSR Excluding GST

32

8640

270

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc..a) 15 mm dia. nominal outer dia Pipes As per Si No-21.02 Excluding GST

80

20800

260

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes As per Si No-21.02Excluding GST

80

24000

300

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes As per Si No-21.02Excluding GST

50

17500

350

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per Si No-21.25

7

6825

975

... More
Construction of un-reinforced, without dowel jointed at expansion and construction joint only, plain cement pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weight appropriate weight batcher using approved mix, design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovets, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification clause 1501. Excluding GST

267

1945629

7287

... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors,jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :Light shade pigment using white cement As per Si No-11.19.1 DSR Excluding GST

120

152280

1269

... More
Carted Earth Cartage of Earth in filling 10.00 Km with all lift and lead, transporting to site ,spreding grading to required slope and compacting as per SOR SI No 253 & 261 (C). complete in all respects As per Si No-251 Excluding GST

567

140049

247

... More
Construction of U-Type Drain

140

202440

1446

... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia As per Si No-23.1.1.1 DSR Excluding GST

120

61800

515

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia As per Si No-23.3.2 DSR Excluding GST

80

46160

577

... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia As per Si No-23.4.2 DSR Excluding GST

60

35220

587

... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. As per Si No-23.6 DSR Excluding GST

4

4480

1120

... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. As per Si No-23.80 DSR Excluding GST

4

5076

1269

... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. As per Si No-123.12 DSR Excluding GST

24

18960

790

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.d) 32 mm dia. nominal outer dia Pipes As per Si No-21.02Excluding GST

60

26400

440

... More
PProviding and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Male Threaded Elbow 90°°For 34.00 mm outer dia x 32 mm nominal dia threaded) As per Si No-18.100.6 DSR Excluding GST

4

1304

326

... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):. (b) 32mm dia. As per Si No-18.46.4 DSR Excluding GST

4

1812

453

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end (b) 32mm dia. As per Si No-18.17.1 DSR Excluding GST

2

1004

502

... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:As per Si No-23.13.1 DSR Excluding GST

2

326

163

... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.100 mm clampAs per Si No-23.14.1 DSR Excluding GST

4

5564

1391

... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m. Including getting out the excavated soil & then returning the soil as required.in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.a) Pipes 80mm to 300mm diameter. As per Si No-2.10.1.2 DSR Excluding GST

105

26880

256

... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 150mm diameter S.W. Pipe a) As per Si No-19.1.2 DSR Excluding GST

100

50600

506

... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) b) 200mm diameter S.W. Pipe As per Si No-19.1.3 DSR Excluding GST

5

3530

706

... More
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.a) 150mm diameter S.W. Pipe a) 150mm diameter S.W. Pipe b) As per Si No-19.3.2 DSR Excluding GST

100

54100

541

... More
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard designb) 200mm diameter S.W. Pipe b) 200mm diameter S.W. Pipe As per Si No-19.3 DSR Excluding GST

5

3180

636



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.