Public Works Department Tender

Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge 110 mm dia.

Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge, 63 mm dia.

Providing and fixing PVC Door bend of approved brand and quality. As per direction of Engineer in charge 110 mm dia.

Providing and fixing PVC Nahani Trap of approved brand and quality. As per direction of Engineer in charge 110 mm dia.

Providing and fixing PVC T 100x100x100mm dia of approved brand and quality. As per direction of Engineer in charge.

Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing of PVC P Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing of PVC Elbow of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing of PVC Socket of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying. (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibra glass cloth when the first layer is still green Overlaps of joints of libre cloth should not be less than 10 cm. (C) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The centre treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick filling with cement morar (which will be paid for separately.) For the purpose of measurement the entire treated surface will be measured. D.A.R No-22.6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size). PWD (SCH) 273.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) DSR No- 4.1.4

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR No- 11.40

Providing and fixing Ist quality ceramic glazed wall tiles (bell/ kajaria/ johnson/ somany) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cost Iron P or S trap 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors whever required. White Vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. D.A.R No-17.1.1

Providing and fixing white vitreous china Single Piece water closet Cera make (CHILE 675x360x755mm) with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R No- 13.80

Providing and fixing false ceiling at all including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 16 mm thick with flanges of 27 mm and 37mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastner 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intrmediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each haing lips of 10.5 mm at 450 mm centre to centre shall be fixed in a dirction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 220 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre with 25mm long dry wall screws @ 230 mm interval including fixing of gypdsum board to ceiling section and perimeter channel with the help of dry wall screws os size. 12.5 mm thick tapered edge gypsum moisture resistant board D.S.R No- 12.45.3