Public Works Department Tender

ii) 60 cm equilateral tringle with diffinitation plate (20cm X 60cm) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

iii) 60 cm Circular with diffinitation plate (20cm x 60cm).and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

xi) 80 mm x 60 mm rectangular with diffinitation plate (20cm x 60cm) and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

Vii) 90 cm high Octagon and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

Supplying and fixing of single mould twin shank reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate/ABS moulded body conform to ASTM D4280 & MoRTH Section 800. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive recommended by the manufacturer. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The length of the road stud shall be 100 mm, width shall be 90 mm and the height of the road stud shall not exceed 20 mm. The base of the marker shall be flat within 1.3 mm as per MORTH Section 800. The road stud shall support a load of 13635 Kg tested in accordance with ASTM D4280. The road stud shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Road stud lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sq.cm. The slope or retro – reflectory surface shall be 35 +/- 5 degree to base. The raised pavement marker shall be make in India and shall be tested for abrassion resistance from government lab and report shall be uploaded along with tender. If somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The product should accompany two year replacement warranty for satisfactory field performance from the manufacturer. (With Shank) as per SOR Ch-26 item no.-5 and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

Providing and fixing of traffic sings - CHEVRON signs at curves retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Morth 801 (8.4) viii and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.

For Hazard marker board Retro-reflactrorised Traffic sign as per IRC67-2012 Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type XI 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 years outdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender. Morth 801 (8.4) xi) 45x90 cm one way Object Hazard verical post and including all material, labour, labour cess, T&P royalty, all tasex ect. complete as per direction by i-in-c but excluding G.S.T.