Public Works Department Tender

Construction of Un-reinforced ,dowel jointed at expansion and construction joint only , plain cementconcrete pavement, thickness as per design ,over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30 (Grade),c/s fine aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedge,steel plates including levelling the formwork as per drawing),spreading the concrete with shovels,rakes,compacted using needle,screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer,sealant, dowel bars,near approaches to bridge/culvert and construction joints,admixtures as approved curing of conctrete slabs for 14-days,curing compound(when specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.

Earthwork on Patari ordinary soil excavation to be the form of regular pit not exceeding 1/2 meter in depth and e/w in embankment to be in 20cm layers,i/c ramming/rolling and dressing the surface to required levels and slopes and also including 1.5m lift and 30 m lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance as directed by the E/I.

Excavation in foundation in soil mixed with moorum/kanker/B.C soil etc. requiring the use of special T&P such as pickaxe, subbals etc. including lift up to 1.50 M and lead up to 30 M complete as per direction of E/I. and as per S.I. No. 252

P.C.C with cement, coarse sand and 40 mm gauge stone ballast in the proportion of 1:3:6 respectively in foundation & plinth including cost of material, labour, T&P etc. required for proper completion of the work

C.R. with cement and coarse sand mortar in the proportion of 1:4 respectively in foundation & plinth including cost of all material, labour, T&P etc. required for proper completion of the work.

Raised cement pointing with cement and fine sand mortar in the proportion of 1:2 respectively over stone masonary including all material, labour, T&P etc. required for proper completion of work.

C.C with cement, coarse sand and 20 mm gauge stone ballast in the proportion of 1:2:4 respectively including cost of material, labour, T&P etc. required for proper completion of the work

Supplying, laying, jointing and fixing of 600 mm dia NP3 class hume pipe with collar including its cost and carriage upto site etc complete as per direction of E/I.

15 MM thick plaster with cement and fine sand mortar in the proportion of 1:4 respectively including all material, labour, T&P etc. complete as per direction of E/I.