Public Works Department Tender

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing pressure relief pipes 100 mm dia in bottom slab of box cell on a filter media base of 500 mm x 500 mm as per drawing and technical specification Clause 1205.5.7 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Drainage spouts complete as per drawing and technical specifications Clause 1209 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

P.C.C. M 15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specifications Clauses 800 and 1211 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and applying tack coat with Bitumen (VG10) using emulsion distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying curtain walls complete as per drawing and technical specification Clause 1304 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Construction of toe walls for protection of slopes as per drawing and technical specifications Clause 1302.5 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Delineator Supply & Fixing of MS Delineator made of Mid steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion The surface should be concealed so that there should not be any exposed surface without powder coating Altematively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide Poles shall conform to Type XI sheeting specifications as per IRC 67 and ASTM D4956 which would ensure to obtaint clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour. TAP transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) - Left/Right Curve, Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 b) 60 cm Circular with diffinitation plate (20 cm x 60 cm)-Speed Limit ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 c) 50 x 60 cm single chevron ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 d) 30 x 90 cm (Left/Right) Object Hazard ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Bedding for Pipe ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412 ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including unserviceable material and stacking the serviceable material with all lead and lift of 1000 m as per Technical Specification Clause 202. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. ,Rates are including all labour, material, T&P, taxes & labour cess but excluding GST.