Public Works Department Tender

Providing and Fixing of 15mm dia C.P. Brass Bib cock, long Nose with wall Flange and aerator Cera Make Code N0-F1015151, including supply of all material, labour, T&P etc. complete.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DAR-16.83,

Providing Corrugated G.S. Sheet roofing including Vertical /Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm dia meter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters and and trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DAR N0-12.1.1,

Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.1.1,

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & Glazed sash (25mm & above) x (50mm & above) & Fly Screen sash (18 mm & Above) X (40 mm & above) with zinc alloy (zamak powder coated touch locks with hook (Height upto 1.2 metre). As DSR -9.147.A3.1,

Providing and Fixing of UV Stabilised Fiberglass reinforced Plastic Sheet Roofing up to any Pitch, including Fixing with Polymer Coated 'J' or 'L' hooks, bolts & nuts 8 mm dia, G.l. Plain/bitumen Washers Complete but excluding the Cost of Purlins, Rafters, Trusses etc. the Sheets shall be manufactured out of 2400 TEX Panel Roving Incorporating Minimum 0.3%, Ultra-Violet Stabiliser in resing system under approximately 2400 PSl and hot Cured. they Shall be of Uniform Pigmentation and thickness without air Pockets and shall Conform to IS 10192 and IS 12866. the Sheets Shall be Opaque or translucent, Clear or Pigmented Textured or Smooth as Specified. 2 mm thick Corrugated (2.5'' or 4.2'' or 6'') or Step-Down (2'' or 3'' or 6'' ) as Specified. DAR N0-12.47.1,

S/F of C.P. Brass Over Head Shower with Arm Heavy Quality, (0668) L&K make, including supply of all material & labour and T & P etc. requird for proper completion of work.

Supply and Fixing of S.S. Jali 125 mm dia,

Providing and placing on terrace ( at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48)

Disposal of building rubbish /malba /similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60,

Providing and laying Interlocking Concrete Block Pavement having thickness 80 mm as per drawings and technical specification Clause 1504, (Exclusive G.S.B) (Ch-25, Sl.N0-34),

S/F of C.P. brass Soap Dish, of L&K Make including Supply of all material, labour, T&P etc. required for Proper completion of the work.

Providing and laying in Position Cement Concrete of Specified Grade excluding the cost of Centering and shuttering all work up to plinth level 1:6:12 (1 cement, 6 Coarse sand (Zone-lll) 12 graded Brick aggregate 20 mm nomical size) SI.No-273. (Rs-4553)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. ((As DS-17.31).

Steel reinforcement for R.C.C. work including Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more. DAR-5.22C.1,

Supply and fixing of Overhead Rain Shower square Size-200x200 mm (8x8'') Cera make Code No-F7010102 with O/H Shower Arm 380 mm (15)'' with Flange. Code No-F7040203 Cera make including supply of all material & labour and T & P etc. requird for proper completion of work.

S/F 15mm dia C.P. brass Central hole basin mixter with Casted Spout of L&K make (Code-0427) including supply of all material, labour, T&P etc. complete. (Rs-3458)

S/F 15mm dia C.P. health faucet ABS body with Wall hook and 1.00 Metre S.S. braided rubber hose Pipe, Cera make Code N0-F8030102, including supply of all material, labour, T&P etc. complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225 mm. (17.10.1.2)

Providing and Fixing of Kitchen Cabinet 60 cm Depth with Centurey Ply 19mm thick of Superior quality and both side Laminated 1mm thick sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge.

Supply and fixing of Cornet wall hung wash basin with full pedestal Size 550X400 mm Cat no-S2040103+S2090101 Cera make with PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work.

Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3,

Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40)

Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DAR.N0-15.23.1

Supply and Fixing of PVC Nahani Trep,

Providing and fixing Cloud One Piece with Seat Cover Size-690x380x780 mm. Cat No-S1013123 S Trap 300 mm Cera make, including Cutting and making good the walls and floors wherever required:

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. each DSR No-17.33,

Providing and fixing ISI marked 12 mm thick Ply with Laminated Both Side 1 mm thick Texture Series Mica. including fixing of wooden cleat of stoppers and including fixing and adjustment of hinges, bolts, locks, handles complete work. (Fitting with necessary screws to be paid seperatly).

Providing and fixing white CARYS Urinal of Size-325x310x420 mm and Accessories Set Connection Pipe 12mm dia, 450 mm lenght Cera Make Code N0-S4020104 with fittings including painting of fittings and cutting and making good the walls and floors,

Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter.

Supply and Fixing of C.P. Angle Cock with wall Flange Cera Make. (Code N0-F-1015201), including supply of all material & labour and T & P etc. requird for proper completion of work.

Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) Non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DAR N0-9.21.1,

Supply and Fixing of Conventional EWCs with Carina Seat Cover, Size-520X360X390 mm, Cat N0-Cat N0-S1056101+Cat N0-B1510119 with Combiflush Cistern Code N0-B1020101, S Trap, Cera Make including Cutting and making good the walls and floors wherever required,

Providing and Fixing Kitchen Cup Board 30cm Depth 19 mm thick Century Ply ISI marked Superior quality and Both Side Laminated 1mm thick Texture Sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge.

S/F 15mm dia C.P. brass Angle valve of L&K make ( Code- 0077 ) including supply of all material, labour, T&P etc. complete. (Rs-830)

Providing and Fixing of Shower Enclosures Corner enclosure with 2 fixied glass and 1 openable door fixed with wall glass 8 mm chrome finish Left Version Height-1950 width 2401-2800 including supply of all material & labour and T & P etc. requird for proper completion of work. (Rs-55000)

Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2

Providing and Fixing 18 mm thick gang saw cut, Mirror Polished, Premoulded and Prepolished, Machine cut for Kitchen Platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. Raj Nagar Plain white Marble Udaipur Green Marble/Zebra Black Marble Area of Slab over 0.50 sqm. (DAR-8.2.1.1, Rs-2697.53)

Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates, framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2,

Supply and Fixing 15mm dia C.P. brass sink Cock with Casted Swinging Spout of L&K make (Code -0207 ) including supply of all material, labour, T&P etc. complete. (Rs-1881)

S/F of C.P. brass towel ring, of L&K make including supply of all material & labour and T & P etc. requird for proper completion of work.

Supply and fixing of Stenless Steel Door And Window Fittings as Sliding Bolt, Tower Bolt, Handels etc. Complete as Direction of i/c.

Supply and Fixing of C.P. Brass Wall Mixter with Bend pipe for Overhead shower Cera Make Code N0-F-1015401, including supply of all material, labour T&P etc. complete.

Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31),

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. DAR-12.52.4,

Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DAR.No-2.1.1,

Providing and Fixing of 15mm dia C.P. brass Bib cock, long Body, (L&K Make-0047) including Supply of all material, labour, T&P etc. complete. (Rs-1287)

Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 75mm dia meter.

12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 Coarse sand). DAR-13.4.1,

Supply and Fixing of C.P. Brass Two Way Bib Cock with single Knob Cera Make. (Code N0-F-1015163), including supply of all material & labour and T & P etc. requird for proper completion of work.