Public Works Department Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Feb 2025
Closing Date12 Feb 2025
Tender Amount₹ 5,30,00,000
Costs
EMD
₹ 10,60,000Document Cost
₹ 2,354Tender Fee
Refer Documents
Summary
Construction Work Of Residential Buildings Of The Office Of Regional Superintendent Of Police And Divisional Officer Special Branch Intelligence Department In Agra District
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEAGR_1002433_1Bid Award Id
ViewTender No
241/14M-AC/2025 dated 17-01-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Anti-Termite Treatment of the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (SOR-Ch-8 Sl-2)
432
105
45360
... More
Anti-Termite Treatment of the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface (SOR-Ch-8 Sl-3)
432
70
30240
... More
Anti-Termite Treatment of the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface (SOR-Ch-8 Sl-4)
432
70
30240
... More
Anti-Termite Treatment the soil along with external perimeter of building at the rate of 2.5 litres of emulsion per square metre of the perimeter wall (SOR-Ch-8 Sl-5)
432
50
21600
... More
1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal
size derived from natural sources) ( DSR-4.1.8)
151.9
5193
788877.46
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content,
the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum.
Upto Plinth Plinth Beam, RCC in Footing, Coloumn ( DSR-5.33.1.1)
204
7246
1478265.6
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more. ( DSR-5.22.6)
1199
8222
9858657.6
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand) ( DSR-6.1.2)
97
5437
527447.2
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) ( DSR-4.1)
76
313
23803.2
... More
Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with piece of cloth lightly soaked in kerosene oil. ( DSR-4.13)
76
111
8466.4
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete for all lift. ( DSR-2.25a)
256
534
136704
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( DSR-2.27)
58
1619
93902
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
1:4 (1 cement: 4 coarse sand) ( DSR-13.5.1)
102
313
32017.8
... More
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
1:4 (1 cement: 4 fine sand) ( DSR-13.8.1)
118.3
364
43096.69
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:
Cement mortar 1:6 (1 cement : 6 coarse sand) ( DSR-6.4.2)
577
6943
4006111
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) ( DSR-6.13.2)
146
856
125092.8
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum
Above Plinth Lintel, Slabe, Beam, Coloumn ( DSR-5.33.2.1)
563
7518
4232802.9
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |!) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ( DSR-9.21.1)
228
1824
415940.4
... More
Providing and fixing Cup board shutters with 25mm thick veneered particle board IS: 3097 marked exterior grade (Grade 1) of approved make including lind class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel plano hinges complete as per direction of Engineer-in Charge. With decorative veneering on one side and commercial veneering on other side ( DSR-9.130.1)
154
1469
226318.4
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters ( DSR-9.23)
383
352
135007.5
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) ( DSR-10.15.1)
11285
148
1679208
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works ( DSR-10.25.2)
9906
131
1303629.6
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) ( DSR-10.28)
1296
588
763214.4
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase ( DSR-12.21.1)
183
232
42565.8
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
With 12 mm mild steel U beading ( DSR-9.135.2)
353
936
330513.9
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws 35 mm thick shutters Second class teak wood. ( DSR-9.134.1.2.1)
102
3978
405786.6
... More
15 mm cement plaster on rough side of single or half brick wall of mix
1:6 (1 cement: 6 coarse sand) ( DSR-13.5.2)
4101.2
301
1236101.68
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. ( DSR-13.22)
1850.1
66
122846.64
... More
12 mm cement plaster of mix :
1:6 (1 cement: 6 coarse sand) ( DSR-13.4.2)
3969.8
262
1040087.6
... More
12 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand) ( DSR-13.4.1)
3482.7
272
948687.48
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm
to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm
height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
With average thickness of 120 mm and minimum thickness at khurra as 65 mm ( DSR-22.7.1)
481.8
1284
618823.92
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ( DSR-11.41.2)
1090.5
1184
1291588.2
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete..
Size of Tile 600x600 mm ( DSR-11.46.2)
121.2
1237
149985
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent ( DSR-11.56.1)
381
3416
1301800.8
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent ( DSR-11.56.1)
72
3416
246009.6
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work ( DSR-8.3.2)
366.6
389
142790.7
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Area of slab Above 0.50 sqm
Kitchen platform ( DSR-8.2.2.2)
51.5
3916
201689.45
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate ( DSR-11.3.1)
250
468
117075
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. ( DSR-11.37)
122.2
836
102159.2
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( DSR-8.31)
604.3
966
584176.81
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Steel) ( DSR-13.62.1)
1214
172
209415
... More
Applying priming coat.
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works ( DSR-13.50.3)
1181.6
51
60616.08
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (wooden painting) ( DSR-13.62.1)
612.1
172
105587.25
... More
Applying priming one coat:
13.50.2 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood ( DSR-13.50.2)
612.1
56
34828.49
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) ( DSR-13.47.1)
4600.7
130
599931.28
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre ( DSR-13.41.1)
5806
141
821549
... More
6mm thick plaster in 1:3 cement & coarse sand on ceiling and soffits of stairs upto floor two level. ( DSR-13.16)
1836.2
229
420489.8
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( DSR-13.8)
10396.7
118
1236167.63
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes ( DSR-10.30.1)
273.2
811
221756.44
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm ( DSR-9.96.1)
320
231
73984
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
250x10 mm ( DSR-9.97.2)
320
87
28096
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm ( DSR-9.100.1)
320
50
16160
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
25 mm dia ( DSR-9.46.3)
322.4
400
129185.68
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper. ( DSR-9.101.2)
80
55
4408
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs. (AR)
32.1
2202
70690.62
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. ( DSR-22.5)
227.3
470
106921.92
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. ( DSR-5.3)
2790.8
59
166610.76
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR-4.1.3)
65.49
6007
393404.98
... More
Providing and fixing Stainless Steel Grating of approved quality and colour 100 mm dia ( SOR-Ch-23 Sl-29A)
64
35
2240
... More
Providing and fixing Stainless Steel Grating of approved quality and colour 125 mm dia ( SOR-Ch-23 Sl-29B)
32
40
1280
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. ( DSR-9.84)
48
749
35980.8
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick ( DSR-11.13)
188.8
69
13197.12
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
Foundations, footings, bases of columns, etc. for mass concrete. ( DSR-5.9.1)
271.2
298
81061.68
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
Columns,Pillars, Piers, Abutments, Posts and Struts. ( DSR-5.9.6)
1621.9
732
1188690.51
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
Lintels, beams, plinth beams, girders, bressumers and cantilevers. ( DSR-5.9.5)
2660.8
561
1493773.12
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick ( DSR-5.9.20)
1981.8
784
1553929.38
... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.
200 mm ( DSR-9.17)
160
142
22768
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( DSR-17.1.1)
16
5159
82558.4
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ( DSR-17.2.1)
16
4967
79486.4
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ( DSR-17.7.4)
48
1432
68774.4
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
a) 32mm dia ( DSR-17.28.2.1)
32
91
2915.2
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
b) 40mm dia ( DSR-17.28.2.2)
16
91
1457.6
... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers complete. ( DSR-17.31)
48
1226
58848
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board
17.10.1.2 510x1040 mm bowl depth 225 mm ( DSR-17.10.1.2)
16
5729
91675.2
... More
Providing & fixing soil, waste and vent SWR Type-B pipes.
a) 110mm dia (AR)
400
572
228960
... More
Providing & fixing soil, waste and vent SWR Type-B pipes.
b) 75mm dia (AR)
400
398
159401.73
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
a) 75mm ( DSR-12.43.1)
60
282
16920.12
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
b) 100mm ( DSR-12.43.2)
100
283
28310
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
a) for 100mm dia pipe. ( DSR-17.37.1)
80
276
22128
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
b) for 75mm dia pipe. ( DSR-17.37.2)
50
274
13720
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( DSR-19.4.2.1)
12
2084
25017.6
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
Shoe (Plain) (SWR)
a) 110 mm Shoe ( DSR-12.42.6)
20
100
2010
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. ( DSR-12.44)
10
41
417
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
a) 110mm diameter ( DSR-12.41.2)
220
287
63294
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
a) 110mm ( DSR-12.43.2)
112
283
31707.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
a) 25 mm nominal dia Pipes ( DSR-18.9.3)
480
270
130032
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
b) 32 mm nominal dia Pipes ( DSR-18.9.4)
260
334
86944
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
c) 40 mm nominal dia Pipes ( DSR-18.9.5)
250
429
107325
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
a) 15 mm nominal dia Pipes ( DSR-18.8.1)
220
379
83490
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
b) 20 mm nominal dia Pipes ( DSR-18.8.2)
185
409
75831.5
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
a) 15mm nominal bore ( DSR-18.21.2.1)
32
74
2384
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
a) 150 mm diameter ( DSR-18.22.2)
32
169
5424
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore ( DSR-18.49.1)
16
386
6182.4
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
a) 15 mm nominal bore ( DSR-18.50.1)
32
625
20022.4
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ( DSR-17.16A)
32
266
8518.4
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms ( DSR-17.71)
32
128
4105.6
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. ( DSR-17.72)
48
176
8486.4
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. ( DSR-17.73.2)
32
540
17296
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
a) 15mm nominal bore ( DSR-18.53.1)
32
437
14009.6
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
a) 25mm. Nominal bore ( DSR-18.18.3)
8
353
2830.4
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
a) 25mm dia nominal bore ( DSR-18.17.1)
16
474
7592
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
b) 32mm dia nominal bore ( DSR-18.17.2)
16
525
8412.8
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
c) 40mm dia nominal bore ( DSR-18.17.3)
16
629
10076.8
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ( DSR-18.48)
16000
8
132800
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
a) Pipes 80mm to 300mm diameter. ( DSR-2.10.1.2)
482
268
129417
... More
Providing and fixing on wall face unplasticised Rigid SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
a) 110mm dia (AR)
100
572
57240
... More
Providing and fixing on wall face unplasticised Rigid SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
b) 160mm dia (AR)
382
964
368477.2
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
a) 100mm diameter S.W. Pipe ( DSR-19.2.1)
100
735
73550
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
b) 150mm diameter S.W. Pipe ( DSR-19.2.2)
382
899
343647.2
... More
Constructing brick masonry manhole with class bricks M-150 in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. ( DSR-19.7.1.1)
50
9737
486860
... More
Providing & fixing CP Brass Single lever telephonic wall mixture of quality & make and as per the direction of engineer-in-charge 15mm nominal dia. ( DSR-17.22B)
32
5292
169347.2
... More
Providing & fixingToilet paper holder ( DSR-17.34)
32
612
19609.6
... More
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 ( DSR-19.8.1.1)
3
6729
20187.3
... More
Inside size 90x120cms and 90cms deep including CI cover with frame (MEDIUM duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg).
With common burnt clay FPS (non modular) bricks of class designation 75
(i) For Sewer Line ( DSR-19.7.2)
4
20133
80534
... More
Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 ( DSR-19.8.2.1)
1.2
8071
9685.32
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. ( DSR-19.16)
8
422
3376.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of
bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
1.50mt to 3.0 mt ( DSR-2.8.1+2.26)
55.6
295
16407.56
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of
bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
3.0 mt to 4.50 mt ( DSR-2.8.1+2.26x2)
12
391
4701.6
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR-5.1.2)
34.7
6897
239329.37
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand) ( DSR-6.1.1)
66
5619
370913.4
... More
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement
20 mm cement plaster ( DSR-13.9.2)
82.5
447
36935.25
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate ( DSR-11.3.1)
57.3
468
26833.59
... More
Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729 ( DSR-17.35.2.1)
2
796
1593
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) ( DSR-19.15.1)
18
415
7475.4
... More
15 mm cement plaster on plinth side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) ( DSR-13.5.1)
667.9
313
209653.81
... More
Supply and filling of Brick Bats (0362)
14.8
400
5924.44
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR-5.2.2)
8.1
8275
67028.31
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
300 mm dia metre 707.75 ( DSR-23.1.1.1)
60
539
32370
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 23.4.2 150 mm nominal size dia ( DSR-23.4.2)
50
615
30775
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
18.9.5 40 mm nominal dia Pipes ( DSR-18.9.2)
45
563
25335
... More
Providind and Fixing of NYLon mesh for filter
1
500
500
... More
Providind and Fixing of Plastic dori
1
1500
1500
... More
Providind and Fixing of Solvent
1
250
250
... More
Providind and Fixing of 6" End cap
1
250
250
... More
Providind and Fixing of 6" Submersible Cap
1
225
225
... More
Providind and Fixing of 2" MS clamp (Heavy)
1
500
500
... More
Providind and Fixing of 2" Gl elbow.
1
110
110
... More
Providind and Fixing of 2"*6" GI nipple
1
140
140
... More
Supply and Fixing of Falcon Three Phase Submersible Pump Set 2.2 Kilowatt. (GEM)
1
25000
25000
... More
Wiring for circuit / submain wiring along with earth with the following size
2 x 4.0sq mm + 1x4.0sq mm earth wire (Factor-0.789 x 107/110) = 0.7675 ( DSR-1.14.3)
95
256
24348.5
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge ( DSR-23.6)
1
1172
1172.7
... More
Providind and Fixing of 2" Ms Socket. ( DSR-)
4
150
600
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required exture, including steel form work with sturdy M.S. channel ections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of ngineerin- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer ( DSR-16.43.2)
12.3
8462
104086.29
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound. ( DSR-16.46.1)
65.9
6
434.94
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge.
16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 ( DSR-16.78.1)
15.2
2122
32265.04
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. ( DSR-16.91.2)
152
832
126494.4
... More
Cost of Ground Leveling for Construction (CPWD-PAR-2023-5.1x0.735x111/107=249.90 (PAR)
729.3
249
182252.07
... More
Part-II Electrical Work-
Wiring for light point fan point/ exhaust fan point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C ( For Light Point)(Elec. DSR-1.10.3)
352
1168
411136
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
(Elec. DSR-1.11)
8
1243
9948.8
... More
Wiring for light point fan point/ exhaust fan point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C(For Fan and Fresh air point)(Elec. DSR-1.10.3)
112
1168
130816
... More
Supply and Fixing of Suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required. (For Plug point)(Elec. DSR-1.31)
240
379
91128
... More
Wiring for light point fan point/ exhaust fan point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C(For Call Bell)(Elec. DSR-1.10.3)
16
1168
18688
... More
Cost of computer board including 3 Nos.5/6 A modular switch,modular socket and 1 No.15/16 A modular switch,modular socket GI Box along with modular base and cover plate for modular switch in recess etc,complete in all respect as required. (Elec. DSR-1.31x3 +1.32x1)
16
1533
24536
... More
Supply and fixing of LED Tube Light with matal heavy duty box type batten light fitting 1 X 22 watt suitable for upto 1 x 22 watt LED polycorbonate tube light complete including tube suitabel for both surface & suspended in all respect.
CAT- AAA(SOR-1413)
160
1190
190400
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.
CAT- AAA(SOR-1421)
8
4940
39520
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required(Elec. DSR-1.12)
80
265
21272
... More
Supply and Fixing of Suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required. (Elec. DSR-1.32)
80
466
37320
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required (Elec. DSR-1.38)
16
78
1260.8
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLOC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Airdelivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THO less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Supply, earthing etc. complete as required
(Elec. DSR-19.1)
80
2173
173888
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the
fan box etc. as required
(Elec. DSR-1.45)
80
269
21592
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excludin modular plate etc. as required. (Elec. DSR-1.25)
80
293
23496
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(Elec. DSR-1.14.2)
1800
218
394020
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 4 sq. mm + 1 X 4 sq. mm earth wire(Elec. DSR-1.14.3)
1530
265
406827
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 6 sq. mm + 1 X 6 sq. mm earth wire(Elec. DSR-1.14.4)
150
349
52425
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre
lono etc. with charcoal/ coke and salt as required
(Elec. DSR-5.6)
16
11017
176284.8
... More
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required
complete in all respect.(SOR-716)
160
90
14400
... More
Supply and Fixing of 10 watt LED Bulb Make Havells(AR)
192
170
32640
... More
Making hole in the wall for exhaust fan and finishing properly complete in all respect.(SOR-1121)
16
375
6000
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.(SOR-1136)
1
2550
2550
... More
Supply and Fixing of Fresh Air Fan 300mm size(AR)
32
2501
80032
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep(Elec. DSR-1.50.1)
16
358
5731.2
... More
1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
(Elec. DSR-1.33)
80
69
5536
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes(Elec. DSR-1.51)
16
164
2636.8
... More
1.58 Supplying and fixing PVC batten/ angle holder including connections etc.as required.
(Elec. DSR-1.58)
192
87
16800
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator).
12 way , Double door(Elec. DSR-2.3.3)
16
1843
29491.2
... More
S&F of 63 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect.
Cat. A(SOR-345)
16
6110
97760
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required.
Single pole(Elec. DSR-2.10.1)
192
203
39129.6
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required.
Double pole(Elec. DSR-2.10.3)
48
522
25070.4
... More
6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
(Elec. DSR-6.2)
1
412
412.4
... More
Add for Invertor Wiring in wiring Point for light/ Fan/
Plug with 1.5 mm Cu Wire(SOR-189A)
256
132
33792
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the
Engineer-Incharge.
a) 4 sq. mm(SOR-504(a))
80
17
1360
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the
Engineer-Incharge.
b) 6 sq. mm(SOR-504(b))
80
18
1440
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the
Engineer-Incharge.
c) 10 sq. mm(SOR-504(c))
80
20
1600
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
c) 16 sq. mm 2 core(SOR-503(c))
16
87
1392
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
j) 25 sq. mm 3-1/2 core(SOR-503(j))
16
123
1968
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
c) 16 sq. mm 2 core(SOR-20a.1.3)
400
457
183040
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
j) 25 sq. mm 3-1/2 core(SOR-20a.1.10)
800
555
444720
... More
Supply and Fixing of Exhast Fan 300mm size (Heavyduty) make Havells(AR)
16
4628
74048
... More
Note - 1- Rates are inclusive of all taxes but excluding GST which shall be paid extra as applicable 2- Labour cess @ 1% will be deducted from contractor's bill at the time of payment
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements