Public Works Department Tender

Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 662 New Item 5 Chp. 15

Finishing wall with two coat of water proof cement paint of approved quality on previosly old treated surface with this paint to give an even shade. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (S.I No. 662+661)

M-150 Brick work in 1:4 cement & Coarse sand mortar, in Plinth & Foundation/Super structure including supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (S.I.No.305a).

12mm thick plaster with cement and approved Fine sand (F.M. 1.25) mortar in 1:4 over brick work minimum thickness should to be less then 1cm. including supply of all materials, labour, T&P, etc. required for proper completion of work as per direction of Engineer-in-charge. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI.No. 584

Providing and Fixing 15mm G.I. B Class Jindal or equivalent complete with G.I. Fitting and Clamp including cutting and making good the walls etc. Internal work - Exposed/Concelled on Wall complete and testing also. All labour, T&P etc. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (SI No. 21.b.13a)

Providing and Fixing 20mm G.I. B Class Jindal or equivalent complete with G.I. Fitting and Clamp including cutting and making good the walls etc. Internal work - Exposed/Concelled on Wall complete and testing also. All labour, T&P etc. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (SI No. 21.b.13b)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.10

Providing and fixing C.P. brass bib cock of approved quality confirming to ISI standards and weighing not less than 690 gms. 15mm nominal bore. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.07

Supply and fixing of 10cm. (4") internal dia PVC down pipes (kissan/suprime make)/Approved quality complete with bends with door at top and plain at bottom and groutings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1" x1/8") fixed to walls with cement motar (1:2) and including supply of 15 cm (6") long 6mm. (1/4") dia nail All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 730A

Providing and fixing water closet squatting pan 580mm Indian type W.C. pan with 100mm sand cast Iron P or S trap, 10 litre low level white P. V.C. flushing cistern with manually controlled device (handle lever) confirming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.12

Providing and fixing wash basin with C.I. Bracket 15mm C.P. Brass Piller Taps, 32mm C.P. Brass Waste of standerd pattern fittings and brackets cutting and making good the wall wherever required. Whit Vitreous china Flat back wash basin of size 550x400mm with 15mm single C.P. brass piller tap. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.16

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.11

Providing and Fixing Glass pane on window. 4 mm thick. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. Item No. 16 b Chp. 1

Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3"x3/8")/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 455

Providing and fixing M.S. Sheet door with frame of of angle iron thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings.oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 517a

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 feet). All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 697

4 cm (1½") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1") graded approved stone grit, laid in panels finished with 3 mm. (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. But without Base concrete and Including fixing of Murga Jali. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (SI No. 605 + S.No. 20 New Item-2 (iii) of Ch.1)

Supply and fixing 6 mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 628

Providing and Fixing Stainless steel A. ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. Brackets and brackets steel plug 40 mm including painting of fitting and brackets, cutting and making good the wall wherever required. Board 470x420 mm bowl depth 178 mm. SI No. 21.18

Providing and Fixing Indian Commercial flush shutters 32 mm. thick (Including cost of all Iron fitting). All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 471(a)+473

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. SI No. 284(a)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge.

M.S. or iron work of small sizes and Z-Section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. Openable panel. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 502(B ii)

Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes ISI marked Hindware or Equivalent respectively with 5 litre white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 21.13

Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (SI. No. 273)

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in florring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 14.26 New Item-4

M.S. or iron work of small sizes and Z-Section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. Fixed panel. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 502(B i)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. 15 mm dia. Nominal Outer Dia Pipes (SI No. 21.01)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. 20 mm dia. Nominal Outer Dia Pipes (SI No. 21.01)

Supply of 80mm thick Precast cement concerete I-Shape' Interlocking paver blocks ISI mark confirming to IS: 15658- 2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. New Item-14 Chp. 20

Granolithic marble flooring 2.5 cm. (1") thick consisting of 2 cm. (3/4") thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4") graded approved stone chips including 5 mm (¼") thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8") but retained on 1.5 mm. (1/16") mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3") 1:6:12, concrete base, including supply of all Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI No. 620

2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1") graded approved stone grit, laid in panels finished with 3 mm. (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. But without Base Concrete. SI No. 601(A)

Painting roofs or other iron work in large areas with one coat priming and Two coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including including supply of all Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. Paint to be used ISI marked. (SI No. 644+645)

Providing & Fixing PVC low level flushing cistern with maualy controlled device (haldle lever) comforming to ISI 7231, with all fitting and fixtures complete. 10 litre capacity white. all Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge.SI No. 21.22

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-Charge within a distance of 60 Metre (200 Feet) all Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. SI.No. 706

Finishing wall with water proof cement paint of approved make and quality on New work with two coats to give an even shade including Cement Primer on Old/New Surface. All Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge.(S.I No. 660+662 N.I. 3)