Public Works Department Tender

S/F of floor tiles 300x300mm superior quality johnson or asian or equivalent make including fixing with 1:4 cement mortar (1 cement :4 coarse sand) grouting complete as per direction of E/I.11.39

S/F of wall tiles 300X450mm superior quality johnson or asian or equivalent make including fixing with 1:3 cement mortar (1 cement :3 coarse sand) grouting complete as per direction of E/I.8.31

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter.18.22.1.

P/F C.P. brass Angle Valve for basin mixture and geyser points ofapproved quality confirming to IS:8931.15 mm nominal bore.18.53.1.

S/Fof Glash shelf 7/32" thick 600x130 mm size with C.P guard rail of standard size and bracket with all labour and material complete.

P/F stainless steel A ISI 304(18/8) kitchen sink with C.I. brackets and stainless steel plug 40 mm .kitchen sink with drain board .510x 1040 mm depth 250 mm.17.10.1.1.

Supply and Fixing of Gayle Single Lever/Quarter Turn Range C.P. Brass Wall Mixter with band Pipe for overhead shower with built-in non return Valve, Cera Make Code N0-F1014402, including supply of all material, labour T&P etc. complete.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board groung fixed to wooden cleats with C.P. brass screws and washers complete.17.31

P/F Wash Basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern white vitrous china wash basin size 630x450 mm with a pair of 15 mm cp brass piller taps.17.7.1.

Mild steel or iron work in heavy sizes such as builts up gates, door and window frames etc , wrought to required form i/c drillind,riveting or welding where necessary and also i/c supply of steel ,bolts,nuts etcand their fixing requried for proper completion of work.

Mirror Polishing on marble Work/Granite work/ Stone work where ever required to give high gloss finish complete. DAR-8.6,

Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron) DAR-21.2.2, (Rs-309)

Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). with Float glass panes of 5 mm thickness. (weight not less than 12.50 kg/sqm) DAR-21.3.2, (Rs-903)

Providing And Fixing Float Glass Panes 6.00 mm thick Glass Panes, (DAR-9.7.7.2)

S/F of Kitchen wardrobe with 19 mm thich ply board i/c all fittings, such as wooden partision,spring rail etc. complete with all labour,material and T&P etc.

Providing Corrugated G.S. Sheet roofing including Vertical/Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters and and trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DAR N0-12.1.1,

Providing and fixing of Bison Board 18 mm thick including supply of all material, labour and T&P etc for the proper completion of the work including removal of old pan etc.