Public Works Department Tender

TRAFFIC SIGNS : MAXIMUM SPEED LIMIT TYPE IV Providing and fixing of retro reflective cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity grade sheeting vide clause 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron pst 75mm x 75mmx 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement 45cmx45cmx60cm below ground level as per aproved drawing. including all taxes but excluding GST. 60 cm Circular Maximum Speed Limit board Type IV

Speed Table (Trapezoidal Hump) Providing and Constructing of Speed Table with Stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction E/I. including all taxes but excluding GST.

Direction and Place Identification Signs with size more than 0.9 sqm size Board Type IV Providing and fixing of retro reflective cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity grade sheeting vide clause 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron pst 75mm x 75mmx 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement 45cmx45cmx60cm below ground level as per aproved drawing. including all taxes but excluding GST. 1.20x0.90m rectangular board Type IV

Relective Raised pavement marker (Road studs/Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Styrene Acrylonitrite) or HIPS high inpact polystyrence) or Acrylontirle butadiens styrence (ABS), the marker shall a lord of 1335 kg tested in accordance with ASTMD 4280 & its reflective panels shall consist of no of lenses containing single or dual prismatic cube of providing total internal reflection of the light entiring the lense face retro reflecting surface shall preferably be 35 ±5o to base and area of each retro reflecting surface shall not be less than 13.0 sqcm road studs shall be visiblily marked with name trademark or other means of identification of the menufacturer diamention of road studs should not be less than 100mmx100mmx10mm RPM (With shank) as per ASTM including all taxes but excluding GST.

Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 meter(20") depth and earth work in embankment to be in 20 cm. (8") layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M(5ft.) lifts and 30M (100ft.) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30M(100ft.) distance as directed by the Engineer-in-charge including all taxes but excluding GST.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 including all taxes but excluding GST.