Public Works Department Tender

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit iN the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 51-289 Complete in all respects as Per direction of Ergineer-In-Charge.

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit iN the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 SI-283A Complete in all respects as Per direction of Ergineer-In-Charge.

As in item no. 48 above but for slabs (Using 1:1.5:3 Mix concrete) SI-284A Complete in all respects as Per direction of Ergineer-In-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete DSR- 5.22.6 Mechanically Treated bars of grade Fe-500D or more Complete in all respects as Per direction of Ergineer-In-Charge.

Brick work with common but clay 1.7.5 mbcks of 61 designation 7.5 in superstructure above ith level up to foor Anved in all shapes and sis Cement mortar 24 cment: 4come sandD5-64 Complete in all respects as Per direction of Ergineer-In-Charge.

Damp proof course 2.5 cm thick and cement concrete consisting of I part cement and 1.5 parts approved coarse sand and 3 parts approved 13mm (1/2") graded stone grit and including water proofing materials as condered by the Engineer in charge in the proportin as specified by the manufacturers. PWD-362 Complete in all respects as Per direction of Ergineer-In-Charge.

20 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) [05- 13.3.31Complete in all respects as Per direction of Ergineer-In-Charge.

Two track two panels sliding door with Aluminium channel for 9.1 roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above & sash (30 mm & above) x (74 mm & above). [Height upto 2.5 metrel Complete in all respects as Per direction of Ergineer-In-Charge.

Second class teakwood wrouht framed and fixed including simple moulding, straight works as is chaukhats including supply of all material,lobour and T&P etc (05-9.1.1) Complete in all respects as Per direction of Ergineer-In-Charge.

Supply and fixing of flush Doors commercial quality conforming to 15. 2202 Part 1(1983) including fixing of wooden cleats and 9.3 stoppers and illuding fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally Complete in all respects as Per direction of Ergineer-In-Charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification (DSR-13.41) Complete in all respects as Per direction of Ergineer-In-Charge.

Interior wall Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or 10.2 more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 905R- 13.48.1) Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per 15: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the 11.1 ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.54 mm dia x 230 mm long G.I. wire at every junction, Including fixing perimeter channels 0.5 mm. thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawi plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to celling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board.Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1) cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm DSR11.41.2 Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. Vo fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the walls etc. (D.S.R. No-18.8.) Complete in all respects as Per direction of Ergineer-In-Charge.25 mm nominal dia Pipes (D.S.R. No-18.8.3 Complete in all respects as Per direction of Ergineer-In-Charge.

32 mm nominal dia Pipes (D.S.R. No-18.8.4 Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and foxing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistem, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid (D.S.R. No-17.2.1) Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and fixing wash basin with C.L. brackets, 15 min C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (D.S.R. No- 17.7.1)Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (D.S.R. No-18.48)Complete in all respects as Per direction of Ergineer-In-Charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 1500x450 mm (D.S.R. No-17.32.4 Complete in all respects as Per direction of Ergineer-In-Charge.

G.S.T. @ 18% of executed work as applicable on sanction G.O. Term.