Public Works Department Tender

Type B - Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. (Excluding Bitumen & GST)

Providing and laying of a stress absorbing membrane over a cracked road surface, with crack width below 6 mm after cleaning with a mechanical broom, using modified binder complying with IRC:SP: 53, sprayed at the rate of 9 kg per 10 sqm and spreading 5.6 mm crushed stone aggregates @ 0.11 cum per 10 sqm with hydraulic chip spreader, sweeping the surface for uniform spread of aggregates and surface finished to conform to clause 902. (Excluding Bitumen & GST)

SCHEDULE - “C” The materials shall be issued to the contractor as following:- S. No. Name of Material Unit Stock issue rate (Rs.) Place of issue 1 Bitumen VG-30 MT 60100.00 P.D., P.W.D. Store at Mainpuri Conditions:- 1- There shall have no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason. 2- The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the punitive rate, i.e., double the issue rate shall be made from the contractor’s bill. 3- Contractor have to return empty bitumen drums/emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill. 4- The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2500 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2500 per day shall be made from contractor’s bill for idle period. 5- Departmental HMP with necessary Road Roller, Tipper and other T&P etc. will be issued free of cost for bituminous work as and where applicable.