Public Works Department Tender

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) As per D.S.R. Ch 5.1.2 1:1.5:3 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).AS Per DSR Ch.-5, SI No.5.3 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more..AS Per DSR Ch-5, S.I 5.22A.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) AS Per DSR Ch-6, S.I.6.1.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) Ch-6, S.I. 2. DSR No.6.4.2. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)AS Per DSR Ch-13, S.I 13.4.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.. AS Per DSR Ch-13, S.I 13.80 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture AS Per DSR Ch-13, S.I 13.62.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. AS Per DSR Ch-13, S.I No. 13.48A (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Mild Steel Iron grill, balcony & staircase railing of a approved qualitiy and drawing including supply of all materials, fabrication, labour, T&P in all respect as per direction of Engineer in-charge for proper completion of wor Ch. 10, SI No16(New). (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.AS Per DSR Ch-11, S.I. No.11.37 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete..AS Per DSR Ch-11, S.I. No.8.31. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge ncluding laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm. As per DRS 2023 Item No. 22.7.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. As per D.S.R. 2023 S.I. No. 12.21.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter As Per DSR Ch.-12, Item No.12.41.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. As Per DSR Ch.-1, Item No.1.1.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.11.3.1 40 mm thick with 20 mm nominal size stone aggregate AS Per DSR Ch-11, S.I 11.3.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer in-charge.9.142.1 Non decorative finish (matt finish) AS Per DSR No. 9.142.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. AS Per DSR Ch 9 SI No. 9.143 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1, 15 mm nominal dia Pipes. As per DSR 2023 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.3, 25 mm nominal dia Pipes. As per DSR 2023 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore As Per DSR Ch.-18, Item No.18.51.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply and fixing of PTMT Grating As per D.S.R. S.I 1858.1.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As Per DSR Ch.-17, Item No.17.1.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid As Per DSR Ch.-17, Item No.17.2.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As er DSR 2023 S.I. 18.48 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete As Per DSR Item No.17.31 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore As Per DSR Ch.-18, Item No.18.53.1(Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore, As per DSR 2023 Item No. 18.16.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per DSR 2023 Item No. 17.4.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms As per DSR 2023 Item No. 17.73.2 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. As per DSR 2023 Item No. 1313 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 As per D.S.R. 2023 S.I 19.7.1.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Wiring point for light with 1.5 sq mm. FRLSH PVC insulted multistrand single core copper conductor cable in heavy Guage rigid PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type awitch & Ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backalite sheet etc Complete in all respect, as direct including matching colour wash Ch- 1 S.I. 131(C) (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Wiring point for Exhaust fan complete with 1.5 Sq. mm. PVC insulated single core aluminium conductor cable in heavy guage PVC conduit pipe with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, concealed in the wall, complete GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backelite sheet etc., complete in all respects, as directed including matching colour. S.I. 137( C) (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply & fixing of LED tube light with batten suitable for up to 1 x22 watt. LED tube light including tube etc on surface complete in all respect. S.I. 1413 CAT-AA (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply & fixing of 40 Amp. DP MCB (10 KA) C Curve. S.I. 1010 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply & fixing of Power Plug with 15A/250 Volts Flush type Switch and 5 pin 15 A/250 Volts flush type Socket Complete. S.I. 1139. (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply and fixing of Havells wall mounting TYPE Air circulator Electric Fan having 600 mlimeter mm sweep Size (As per Gem Govt. E-Marketplace) (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Supply and fixing of BAJAJ Exhaust Fan 300 mm (As per Gem Govt. E-Marketplace) (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)