Public Works Department Tender

Providing and fixing ISI marked 30 mm thick flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. DAR N0-9.21.2, (Rs-1387)

Providing and Laying of 62, mm thick Cement Concrete Flooring with Concrete hardner topping, Under layer 50 mm thick Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thcik Cement hardener Consisting of mix 1:2 (1 Cement hardener mix : 2 Graded Stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 liter Per 50 kg of Cement or as per manfacture's specification. this includes Cost of Cement slurry, but excluding the cost of nosing of steps etc. Complete. (Rs-662)

Providing and Applying Fibre reinforced elastomeric liquid AP Smart Care Damp proof Asian Paint membrane with Two coats @ 10.76 litre/10 Sqm. One Coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two Coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete appliction/system not less than 500 microns). the operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of engineer-in-charge, (Rs-460)

Providing Corrugated G.S. Sheet roofing including Vertical/Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters and and trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DAR N0-12.1.1, (Rs-897)

Providing and Fixing 12 mm thick densified tegular edged eco friendly light weight false ceiling tiles (Armstrong Mineral Fiber Acoustical Suspended Ceiling with New Lotus RH 70 Board Tile 600x600x12 mm module) of approved texture spintone/cosmos / Hexa or equivalent in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 15x45 mm made from 0.30 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 15x45 mm made out of 0.30 mm (Minimum) sheet, 1200 mm long The False ceiling tile shall have NRC. value of 0.50(Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043 w/m 0 KC. The Tile & Grid system used together should carry a 15 year warrantee.

Providing and fixing Factory made UPVC white colour Casement/ Casement Cum Fixed glazed window comprising of uPVC maulti-chaqmbered frame. sash and multion (Where ever required) extruted profile duty reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required lenght (SHape & Size accrding to uPVC profile). uPVC extruded glazing beads of of appropriate dimension, EPDM gasket. stainless Steel (SS-304 grade) Casement window Double Panles with Top Fixed with S.S. Fnction hinges (350x19x19) mm. made of (Small Series) Frame 47x50 mm & Sash 47x68 mm & Mullion 47 x68 mm all having wall thickness of 1.90 ±0.2 mm and Single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm) (DAR -9.147A.3, Rs-6061)

Supply and Fixing of Stainless Steel Single Towel Rail 600 mm long Also Available, Jaguar make Code N0-AKP-35711PS, including supply of all material & labour and T & P etc. requird for proper completion of work.

Supply and Fixing of C.P. Brass Single Lever Basin Mixer without PopUp Waste system with 450 mm long braided hoses, Jaquar Make Code N0-ALI-CHR-85011B, including supply of all material, labour T&P etc. complete.

Supply and Fixing of Alive Maze Overhead Shower 200X300 mm Round Edge & Rectangular Head Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System with Shower Arm 20mm & 600 mm long Round Shape with 90˚ Bend for wall Mounted Shower with Flange, Code No-OHS-CHR-85859M+SHA-479L600, Jaquar make including supply of all material & labour and T & P etc. requird for proper completion of work.

S/F of C.P. brass towel ring Square Code N0-AKP-35721P, Jaquar make. including supply of all material & labour and T & P etc. requird for proper completion of work.

S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AKP-39731P, including supply of all material, labour, T&P etc. complete.

Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete.

Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 560X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar make with C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work.

Providing and fixing mirror of atul make with indian polish of 600x450 mm size with bevelled edge complete with 6 mm hard board sheet and Teak Wood Beading with clips for mirror 600x450x5mm fixed with Iron screws and washers complete.

Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaquar Make. (Code N0-ALI-85053), including supply of all material & labour and T & P etc. requird for proper completion of work. (Rs-1502)

Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron) DAR-21.2.2, (Rs-309)

Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). with Float glass panes of 5 mm thickness. (weight not less than 12.50 kg/sqm) DAR-21.3.2, (Rs-903)

Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). with APC Sheet (Aluminium Power Coated Sheet). (Rs-1134)

Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer Incharge . Internal work -Exposed on wall (20mm nominal outer dia pipe )18.7.2, (Rs-187)

Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing . This includes joints of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer Incharge. Internal work -Exposed on wall (25 mm nominal outer dia pipe )18.7.3, (Rs-229)

Supply and fixing of Stenless Steel Door And Window Fittings as Sliding Bolt, Tower Bolt, Handels etc. Complete as Direction of i/c. (Rs-650)

Providing and Fixing of Godrej Make Door Closer (having brand logo with ISI) with Necessary accessories and Screws etc. Complete. (Rs-1454)

Disposal of malwa from site to 15 K.m away at Faizabad Raod including loading unloading and stacking charges. (Rs-317.20)