Public Works Department Tender

Earth work in cutting or filling in embankment patries in ordinary soil, excavation to be done in the form of regular pits not exceeding 1/2M the depth and earth work embankment ot be in 20cm. Layers including ramming and dressing the surface to required levels and slopes and also including 1.5 meter (5ft.) lifts and 30M (100ft.) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M (100ft) as directed by Engineer-in-Charge including all labour, meterial, royalty and T&P labour cess all taxes complete but excluding GST.

Providing laying, spereading and compacting stone aggregates (G-3) of specific sizes to water bound macadam specification including speading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, MORD Specification 405.3 including all labour, meterial, royalty and T&P labour cess all taxes complete but excluding GST.

Construction of un-reinforced plain cement concrete pavement, thickness as per design over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 Grade coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side frame work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the framework as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continious operation including provision of contraction and expansion, construction joints by providing 12mm thick dura board at the specified spacing, applying debonding strips primer, with MS dowel bar sealant near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 but including cost of polythene sheet and also including cost of all material, labour, cess, Royalty and T&P etc. for proper completion of work but Excluding GST.