Public Works Department Tender

Direction and Place Identification signs Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 (Size 0.90 sqm board) Km-1 to 12

RETRO-REFLECTORISED TRAFFIC SIGNS Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Size 600 mm Equilateral triangle) Km-1 to 12

TRAFFIC SIGNS - SINGLE CHEVRON (NORMAL) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Size 600 mm x 500 mm) Km-1 to 12

Cat's Eye Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973 .AS per Morth Suggestive 8.35. Km-1 to 12

Delignater Post Providing and fixing of Rectro reflective delinator post IZ-ASTAMD-456-04 made of 75mm dia round pipe of 1-2 mtr. Height with fixing support of flate iron 25mmx25mm rectro reflective strip 4 no. fixed round side of the post electric welded and covers with jali and painted with black paint including all labour and cartage etc. complete with fixing at site as per direction of E/I. Km-1 to 12

Crash Barrier Providing and erecting a " W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 m c/c,1.8 m high, 1.1 m below ground/road level,all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of chanel section 150x75x5mm,330 mm long complete as per clause 810. Km-1 to 12

Over Head Supply , fixing & erection of built up overhead structure 12-15 meter span comprising of two vertical post of 6 mtr. Height made up of 300 mm NB heavy class MS pipe as vertical member weided with 10 mm MS plate at top & 12mm MS plate at bottom. The horizontal truss shall comprise of 40 mm dia heavy class MS pipe as bracing & 10 mm MS plate at bottom for fixing of vertical post as per structure design & drawing with one of steel primer and two coat of synthetic enamal paing the work construction of RCC foundation of zize 0.90 x 0.90 mm of required depth as per side condition for built up structure including earth work in excavation, 100 mm thick lean concrete in 1:4:8 RCC with 1:2:4 including supply and fixing of 25 mm dia foundation boilts 600 mm long as per provision of structure design including cost of reinforcement and and shuttering The leteral vertical clearances and complete. Km-1 to 12