Public Works Department Tender

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work.(4.1.8) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) DSR 6.1.2 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand). DSR .6.4.2 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar of mix 1:4 (1cement: 4 coarse sand). DSR 14.75 I/C cost of material, labour, T&P and all Taxes but Excluding GST

12 mm cement plaster on brick work with cement mortar of mix III) 1:6 (1 cement : 6 Coarse sand) DSR 13.4.2 I/C cost of material, labour, T&P and all Taxes but Excluding GST

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) DSR 13.5.2 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work. DSR 13.99.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). DSR 5.3 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. DSR 5.9.20 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and laying "brick coba" 12mm thick laid with M-100 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work. DSR 22.7 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally.(B) 35mm thick. DSR 9.21.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. DSR 13.109.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. DSR 13.81.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. DSR 13.111.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work.DSR 13.80 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. DSR 10.29.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

S/F 6mm (1/4") thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work.DSR 11.38 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore DSR 18.50.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore DSR 18.52.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore DSR 18.53.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (a) D-10 (b) 20 mm nominal outer dia Pipes I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (c) 25 mm nominal outer dia Pipes I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings.110 mm dia DSR 12.41.2 I/C cost of material, labour, T&P and all Taxes but Excluding GST

White Vitreous China Wash basin size 630×450 mm with a single 15 mm C.P. brass pillar tap DSR 17.7 a I/C cost of material, labour, T&P and all Taxes but Excluding GST

Suppling and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all materials, labours and T&P etc. for proper completion of the work. Tank should be ISI marked, Sintex or equivalent and I/C all taxes.(c ) For 500 litres. DSR 18.48 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.2.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry etc. complete.(a) 40mm thick floor with 12.5 mm nominal size stone aggregate. DSR 11.3.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) DSR 10.13.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST