Public Works Department Tender

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 yrs warranty rates include design, fabrication, supply, transportation & erection of the give way sign board and also include all taxes, royalty. etc all T&P/machine material and labour required for porper complection of work. SI No new item 1(I) (MORT&H specification no 801) but excluding GST (Item will be executed indicated in as per attached NIT) (90 cm equilaterial triangle) S.I. N.I.1 (i) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 yrs warranty rates include design, fabrication, supply, transportation & erection of the Stop sign board and also include all taxes, royalty. etc all T&P/machine material and labour required for porper complection of work. SI No new item 2(I) (MORT&H specification no 801) but excluding GST (Item will be executed indicated in as per attached NIT) Hazard marker 30cmx90 cm) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 yrs warranty rates include design, fabrication, supply, transportation & erection of the speed limit sign board and also include all taxes, royalty. etc all T&P/machine material and labour required for porper complection of work. SI No new item 1(III) (MORT&H specification no 801) but excluding GST (Item will be executed indicated in as per attached NIT) (60 cm circular) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing with 7 yrs warranty rates include design, fabrication, supply, transportation & erection of the (Single Chevron 45 cmx60 cm rectangular) also include all taxes, royalty. etc all T&P/machine material and labour required for porper complection of work. SI No new item 2(III) (MORT&H specification no 801) but excluding GST (Item will be executed indicated in as per attached NIT) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and laying of speed table (Tripizoidal hump 4.9 m long and 7.00 metre wide, 75 mm thick) with bituminous concrete as per designed IRC :11-2015 including tack coat including all material, T&P & all labour complete of work as per directin of engineer in charge including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT)

Providing and laying of repeated bars with hot applied thermoplastic compound marking 300 wide , 5 mm hieght and 600 mm apart as per IRC-35 the finished the serface to be lable, uniform and free from streaks and holes including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT)

Reflective Raised Pavement Marker with shanks Providing and fixing of raised pavement markers with twin shanks of adequate length anchored with epoxy / bitumen adhesive of approved make(Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P/ machine material and labour required for proper completion of work. including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT) (SI No 9 New Item) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 (Berger/Asain paint). The finished surface to be level, uniform and free from streaks and holes. including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT) (SI No 5 New Item)

Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing MS Railing through MS Sections welding as and when required. Rates are inclusive of all taxes, royalty, VAT etc. all T&P/machine material and labour required for proper completion of work including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT) (SI No 11 New Item) Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination.

Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS: 1367, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm, 330 mm long complete as per clause 810 including all labour, material, T&P, taxes & labour cess but excluding GST (Item will be executed indicated in as per attached NIT)