Public Works Department Tender

12 mm. thick plaster with cement and Coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1 cm. including all type of taxes,octroi, toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As Per DSR Item No. 14.1.2

Concrete with 2cm. Guage apoorved stone grit tcoarse sand and cement in proportion of 1:2:4 in foundation & under floorsincluding all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 4.1.3

Supply & fixing Vitrified tiles ( Kajaria,Bell,or somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand morter finished with white cement slurry, jointing and polishing complete including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 11.46.2

Supply & fixing 30 mm thick flush Shutter commercial quality ISI marked plywood including fixing & adjustment of hinges, bolts,locks,handles spring & or other fittings but excluding their supply and including painting with two coats .including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As Per DSR Item No. 9.21.2

Providind wall putty or old surface with approved quality material of berger/J.K./birla or similar make two coats .including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As Per DSR Item No. 13.80

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs Per DSR 13.111.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand & manufacturer including applying additional coats wherever required to achieve even shade & colour Old Surface.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs Per DSR 13.81

Painting with synthetic enamel paint of approved brand & manufacture to give an even shade.Two or more coats on old work.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs per DSR 13.99

Providing & fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm & average width of aperture 1.4 mm in both directions for doors, windows & clerestory windows with necessary screws.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs per DSR Item No. 9.134.1.1.1

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.DSR Item No. 17.31

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs Per DSR No.18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTAs Per DSR No.18.53.1

Providing & laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer,3 mm thick water proofing membrane,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C,0.87-0.89 kg/litre & viscocity 70 - 160 cps.Over the primer coat the layer of membrane shall be laid using butane torch & sealing all joints etc.& preparing the surface complete.The vital physical & chemical 5 parameters of the membrane shall be as under: Joint strength in longitudinal & transverse direction at 23°C as 350/300 N/5 cm.Tear strength in longitudinal & transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D-5147.The laying of membrane shall be got done through the authorise dapplicator of the manufacturer of membrane..including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GSTDSR No.14.88